Re: [PATCH] [ADD] 1.support new ic type for version 4.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam,

FYI:

You sent this message as both plain/text and html, but vger.kernel.org
mailing lists are configured to discard all emails with html in them, so
while I did get your reply others did not. Please try to find mail agent
allowing you to use only plain text when interacting with Linux-related
mailing list.

In any case I received your updated patch and applied it. It should show
up in mainline with my next pull request (couple of days).

Thanks!

On Thu, Jan 08, 2015 at 05:30:54PM +0800, 洪一竹  wrote:
> Thank you for your prompt reply!
> 
> Reply message below.
> 
>  
> 
> -----Original Message-----
> From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx] 
> Sent: Wednesday, January 07, 2015 3:26 PM
> To: Sam hung
> Cc: linux-input@xxxxxxxxxxxxxxx; dusonlin@xxxxxxxxxx
> Subject: Re: [PATCH] [ADD] 1.support new ic type for version 4.
> 
>  
> 
> On Tue, Jan 06, 2015 at 11:21:36PM -0800, Dmitry Torokhov wrote:
> 
> > Hi Sam,
> 
> > 
> 
> > On Tue, Jan 06, 2015 at 04:10:16PM +0800, Sam hung wrote:
> 
> > > ---
> 
> > >  drivers/input/mouse/elantech.c | 23 +++++++++++++----------
> 
> > >  1 file changed, 13 insertions(+), 10 deletions(-)
> 
> > > 
> 
> > > diff --git a/drivers/input/mouse/elantech.c 
> 
> > > b/drivers/input/mouse/elantech.c index f2b9780..4891d07 100644
> 
> > > --- a/drivers/input/mouse/elantech.c
> 
> > > +++ b/drivers/input/mouse/elantech.c
> 
> > > @@ -700,14 +700,14 @@ static int elantech_packet_check_v1(struct 
> 
> > > psmouse *psmouse)
> 
> > >  
> 
> > >  static int elantech_debounce_check_v2(struct psmouse *psmouse)  {
> 
> > > -        /*
> 
> > > -         * When we encounter packet that matches this exactly, it means
> the
> 
> > > -         * hardware is in debounce status. Just ignore the whole
> packet.
> 
> > > -         */
> 
> > > -        const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff,
> 0xff };
> 
> > > -        unsigned char *packet = psmouse->packet;
> 
> > > -
> 
> > > -        return !memcmp(packet, debounce_packet,
> sizeof(debounce_packet));
> 
> > > +        /*
> 
> > > +        * When we encounter packet that matches this exactly, it means
> the
> 
> > > +        * hardware is in debounce status. Just ignore the whole packet.
> 
> > > +        */
> 
> > > +        const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff,
> 0xff };
> 
> > > +        unsigned char *packet = psmouse->packet;
> 
> > > +
> 
> > > +        return !memcmp(packet, debounce_packet,
> sizeof(debounce_packet));
> 
> > >  }
> 
> > 
> 
> > Hmm, this chunk seems to be replacing spaces with tabs... I'd rather 
> 
> > had it separate from the hardware version changes.
> 
> > 
> 
> > I'll pick up the chunk below though.
> 
> OK,In this Patch I will not change these lines (‘space’to ‘tab’).
> 
>  
> 
> Ah, I missed the fact that the patch does not have your "signed-off-by"
> 
> signature (see Documentation/SubmittingPatches). Please resend with it.
> 
>  
> 
> Thanks for your reminder.
> 
> I will fix this problem.
> 
> > 
> 
> > >  
> 
> > >  static int elantech_packet_check_v2(struct psmouse *psmouse) @@ 
> 
> > > -1499,7 +1499,7 @@ static const struct dmi_system_id 
> 
> > > no_hw_res_dmi_table[] = {
> 
> > >  /*
> 
> > >   * determine hardware version and set some properties according to it.
> 
> > >   */
> 
> > > -static int elantech_set_properties(struct elantech_data *etd)
> 
> > > +static int elantech_set_properties(struct psmouse *psmouse, struct 
> 
> > > +elantech_data *etd)
> 
> > >  {
> 
> > >         /* This represents the version of IC body. */
> 
> > >         int ver = (etd->fw_version & 0x0f0000) >> 16; @@ -1520,9
> +1520,12 
> 
> > > @@ static int elantech_set_properties(struct elantech_data *etd)
> 
> > >                 case 7:
> 
> > >                 case 8:
> 
> > >                 case 9:
> 
> > > +                case 10:
> 
> > > +                case 13:
> 
> > >                         etd->hw_version = 4;
> 
> > >                         break;
> 
> > >                 default:
> 
> > > +                        psmouse_err(psmouse, "failed to setting hw
> version.\n");
> 
>  
> 
> The caller of elantech_set_properties() already issues message about unknown
> hardware version, why do we need to have it here as well?
> 
>  
> 
> I think you're right.
> 
> I will fix this line.
> 
>  
> 
> > >                         return -1;
> 
> > >                 }
> 
> > >         }
> 
> > > @@ -1593,7 +1596,7 @@ int elantech_init(struct psmouse *psmouse)
> 
> > >         }
> 
> > >         etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
> 
> > >  
> 
> > > - if (elantech_set_properties(etd)) {
> 
> > > +        if (elantech_set_properties(psmouse, etd)) {
> 
> > >                 psmouse_err(psmouse, "unknown hardware version,
> aborting...\n");
> 
> > >                 goto init_fail;
> 
> > >         }
> 
> > > --
> 
> > > 1.8.3.2
> 
> > > 
> 
>  
> 
> Thanks.
> 
>  
> 
> -- 
> 
> Dmitry
> 
>  
> 

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux