Ping. I hope the mux regression problem has settled down a bit in the mean time. On Thu, Oct 23, 2014 at 11:39:43AM -0700, Dmitry Torokhov wrote: > Date: Thu, 23 Oct 2014 11:39:43 -0700 > From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > To: ulrik.debie-os@xxxxxxxxx > Cc: Jan Kiszka <jan.kiszka@xxxxxx>, Hans de Goede <hdegoede@xxxxxxxxxx>, > linux-input@xxxxxxxxxxxxxxx, David Herrmann <dh.herrmann@xxxxxxxxx> > Subject: Re: [PATCH 0/5] Input: elantech - support the Fujitsu H730 laptop > > On Thursday, October 23, 2014 08:36:19 PM ulrik.debie-os@xxxxxxxxx wrote: > > Hi Dmitry, > > > > On Sat, Oct 04, 2014 at 11:36:26AM +0200, Hans de Goede wrote: > > > Hi, > > > > > > On 10/04/2014 11:33 AM, Jan Kiszka wrote: > > > > On 2014-08-30 16:10, Ulrik De Bie wrote: > > > >> This patch set makes the elantech driver work for the Fujitsu H730 > > > >> laptop. It also adds a sysfs knob to allow other laptops that are > > > >> facing similar problems as the Fujitsu H730 to have working touchpad. > > > >> > > > >> I'm considering adding a WARN_ONCE when the crc_enabled signature check > > > >> fails. The message would then point the user to the crc_enabled sysfs > > > >> knob, > > > >> and kindly ask the user to report the laptop to linux-input mailinglist > > > >> ? > > > >> Any suggestions ? > > > >> > > > >> Two users have tested the combination of this patchset and confirmed > > > >> that > > > >> it makes the H730 touchpad/trackpoint work. > > > >> > > > >> Here an overview of the patchset: > > > >> > > > >> Patch 1/ : Input: elantech - use elantech_report_trackpoint for > > > >> hardware v4 too The Fujitsu H730 is the first v4 hardware identified > > > >> that also sends the trackpoint packets. This patch enables the > > > >> trackpoint on v4 hardware. With this patch the trackpoint will work. > > > >> > > > >> Patch 2/ : Input: elantech - Fix crc_enabled for Fujitsu H730 > > > >> Uses DMI to detect the H730 and ,if detected, will set crc_enabled to > > > >> 1. > > > >> With this patch the touchpad and left/right button will start to work. > > > >> > > > >> Patch 3/ : Input: elantech - report the middle button of the touchpad > > > >> The Fujitsu H730 is the first laptop listed in the elantech.c file with > > > >> 3 touchpad buttons. This patch enables the middle button for all > > > >> elantech > > > >> hardware and enables the reporting for v4 hardware. > > > >> I want to hear feedback here on what preferences exist for the > > > >> conditions > > > >> to enable the middle button: > > > >> - DMI > > > >> - enable only for v4 > > > >> - enable for all/report for v3+v4 > > > >> ... > > > >> > > > >> Patch 4/ : Input: Elantech - provide a sysfs knob for crc_enabled > > > >> Probably H730 will not remain the only elantech laptop that has this > > > >> failing detection for the crc_enabled. This provides users with a > > > >> workaround when the crc_enabled detection fails. > > > >> > > > >> Patch 5/ : Elantech - Update the documentation: > > > >> trackpoint,v3/v4,crc_enabled This provides an update of the elantech > > > >> documentation. > > > >> > > > >> Patch 4 depends on patch 2, and for consistency, patch 5 depends on > > > >> patch 1-2-4.> >> > > > >> Ulrik De Bie (5): > > > >> Input: elantech - use elantech_report_trackpoint for hardware v4 too > > > >> Input: elantech - Fix crc_enabled for Fujitsu H730 > > > >> Input: elantech - report the middle button of the touchpad > > > >> Input: elantech - provide a sysfs knob for crc_enabled > > > >> > > > >> Input: elantech - Update the documentation: > > > >> trackpoint,v3/v4,crc_enabled > > > >> > > > >> Documentation/input/elantech.txt | 85 ++++++++++++++++++++++++++-- > > > >> drivers/input/mouse/elantech.c | 119 > > > >> ++++++++++++++++++++++++++++++++------- > > > >> drivers/input/mouse/elantech.h | 2 +- > > > >> 3 files changed, 179 insertions(+), 27 deletions(-) > > > >> > > > >> Best regards, > > > >> Ulrik De Bie > > > > > > > > What's the status of this series? Is it queued for 3.18 already? > > > > > > I don't see them in next yet: > > > > > > http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/driver > > > s/input/mouse/elantech.c > > > > > > I agree it would be nice to get these into 3.18. > > > > > > Dmitry, what is the plan here ? > > > > Ping Dmitry ? > > > > Do you want me to resend the patch ? > > Hi Ulrik, > > No, I have it, didn't have a chance to look at it though. Give me a day or so > please. > > Thanks. > > -- > Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
