Hi, On 10/04/2014 11:33 AM, Jan Kiszka wrote: > On 2014-08-30 16:10, Ulrik De Bie wrote: >> This patch set makes the elantech driver work for the Fujitsu H730 laptop. It >> also adds a sysfs knob to allow other laptops that are facing similar >> problems as the Fujitsu H730 to have working touchpad. >> >> I'm considering adding a WARN_ONCE when the crc_enabled signature check >> fails. The message would then point the user to the crc_enabled sysfs knob, >> and kindly ask the user to report the laptop to linux-input mailinglist ? >> Any suggestions ? >> >> Two users have tested the combination of this patchset and confirmed that >> it makes the H730 touchpad/trackpoint work. >> >> Here an overview of the patchset: >> >> Patch 1/ : Input: elantech - use elantech_report_trackpoint for hardware v4 too >> The Fujitsu H730 is the first v4 hardware identified that also sends the >> trackpoint packets. This patch enables the trackpoint on v4 hardware. >> With this patch the trackpoint will work. >> >> Patch 2/ : Input: elantech - Fix crc_enabled for Fujitsu H730 >> Uses DMI to detect the H730 and ,if detected, will set crc_enabled to 1. >> With this patch the touchpad and left/right button will start to work. >> >> Patch 3/ : Input: elantech - report the middle button of the touchpad >> The Fujitsu H730 is the first laptop listed in the elantech.c file with >> 3 touchpad buttons. This patch enables the middle button for all elantech >> hardware and enables the reporting for v4 hardware. >> I want to hear feedback here on what preferences exist for the conditions >> to enable the middle button: >> - DMI >> - enable only for v4 >> - enable for all/report for v3+v4 >> ... >> >> Patch 4/ : Input: Elantech - provide a sysfs knob for crc_enabled >> Probably H730 will not remain the only elantech laptop that has this failing >> detection for the crc_enabled. This provides users with a workaround when >> the crc_enabled detection fails. >> >> Patch 5/ : Elantech - Update the documentation: trackpoint,v3/v4,crc_enabled >> This provides an update of the elantech documentation. >> >> Patch 4 depends on patch 2, and for consistency, patch 5 depends on patch 1-2-4. >> >> Ulrik De Bie (5): >> Input: elantech - use elantech_report_trackpoint for hardware v4 too >> Input: elantech - Fix crc_enabled for Fujitsu H730 >> Input: elantech - report the middle button of the touchpad >> Input: elantech - provide a sysfs knob for crc_enabled >> Input: elantech - Update the documentation: >> trackpoint,v3/v4,crc_enabled >> >> Documentation/input/elantech.txt | 85 ++++++++++++++++++++++++++-- >> drivers/input/mouse/elantech.c | 119 ++++++++++++++++++++++++++++++++------- >> drivers/input/mouse/elantech.h | 2 +- >> 3 files changed, 179 insertions(+), 27 deletions(-) >> >> Best regards, >> Ulrik De Bie >> > > What's the status of this series? Is it queued for 3.18 already? I don't see them in next yet: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/drivers/input/mouse/elantech.c I agree it would be nice to get these into 3.18. Dmitry, what is the plan here ? Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
