Since LoCoMo driver has been converted to provide proper gpiolib interface, make poodle ASoC platform driver use gpiolib API. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> --- sound/soc/pxa/poodle.c | 51 ++++++++++++++++++++++++-------------------------- 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 21f3400..a593bff 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -20,12 +20,12 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <asm/hardware/locomo.h> #include <mach/poodle.h> #include <mach/audio.h> @@ -48,16 +48,12 @@ static void poodle_ext_control(struct snd_soc_dapm_context *dapm) /* set up jack connection */ if (poodle_jack_func == POODLE_HP) { /* set = unmute headphone */ - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 1); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 1); + gpio_set_value(POODLE_GPIO_MUTE_L, 1); + gpio_set_value(POODLE_GPIO_MUTE_R, 1); snd_soc_dapm_enable_pin(dapm, "Headphone Jack"); } else { - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 0); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 0); + gpio_set_value(POODLE_GPIO_MUTE_L, 0); + gpio_set_value(POODLE_GPIO_MUTE_R, 0); snd_soc_dapm_disable_pin(dapm, "Headphone Jack"); } @@ -85,10 +81,8 @@ static int poodle_startup(struct snd_pcm_substream *substream) static void poodle_shutdown(struct snd_pcm_substream *substream) { /* set = unmute headphone */ - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 1); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 1); + gpio_set_value(POODLE_GPIO_MUTE_L, 1); + gpio_set_value(POODLE_GPIO_MUTE_R, 1); } static int poodle_hw_params(struct snd_pcm_substream *substream, @@ -178,12 +172,7 @@ static int poodle_set_spk(struct snd_kcontrol *kcontrol, static int poodle_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 0); - else - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 1); + gpio_set_value(POODLE_GPIO_AMP_ON, !(SND_SOC_DAPM_EVENT_ON(event))); return 0; } @@ -263,25 +252,32 @@ static struct snd_soc_card poodle = { .num_dapm_routes = ARRAY_SIZE(poodle_audio_map), }; +struct gpio poodle_gpios[] = { + { POODLE_GPIO_AMP_ON, GPIOF_OUT_INIT_HIGH, "Amplifier" }, + { POODLE_GPIO_MUTE_L, GPIOF_OUT_INIT_LOW, "Mute left" }, + { POODLE_GPIO_MUTE_R, GPIOF_OUT_INIT_LOW, "Mute right" }, +}; + static int poodle_probe(struct platform_device *pdev) { struct snd_soc_card *card = &poodle; int ret; - locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 0); - /* should we mute HP at startup - burning power ?*/ - locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 0); - locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 0); + ret = gpio_request_array(poodle_gpios, ARRAY_SIZE(poodle_gpios)); + if (ret) { + dev_err(&pdev->dev, "gpio_request_array() failed: %d\n", + ret); + return ret; + } card->dev = &pdev->dev; ret = snd_soc_register_card(card); - if (ret) + if (ret) { dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + gpio_free_array(poodle_gpios, ARRAY_SIZE(poodle_gpios)); + } return ret; } @@ -290,6 +286,7 @@ static int poodle_remove(struct platform_device *pdev) struct snd_soc_card *card = platform_get_drvdata(pdev); snd_soc_unregister_card(card); + gpio_free_array(poodle_gpios, ARRAY_SIZE(poodle_gpios)); return 0; } -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html