Convert poodle to use new mfd-based LoCoMo driver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
---
arch/arm/mach-pxa/Kconfig | 1 -
arch/arm/mach-pxa/include/mach/poodle.h | 14 +++++++++-----
arch/arm/mach-pxa/poodle.c | 19 +++++++++++++++----
3 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e6690a4..1da3e8f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -473,7 +473,6 @@ config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
- select SHARP_LOCOMO
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index b56b193..e8eb51e 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -81,11 +81,15 @@
#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
-#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
+#define POODLE_LOCOMO_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define POODLE_GPIO_LCD_VSHA_ON (POODLE_LOCOMO_GPIO_BASE + 4)
+#define POODLE_GPIO_LCD_VSHD_ON (POODLE_LOCOMO_GPIO_BASE + 5)
+#define POODLE_GPIO_LCD_VEE_ON (POODLE_LOCOMO_GPIO_BASE + 6)
+#define POODLE_GPIO_LCD_MOD (POODLE_LOCOMO_GPIO_BASE + 7)
+#define POODLE_GPIO_AMP_ON (POODLE_LOCOMO_GPIO_BASE + 8)
+#define POODLE_GPIO_FL_VR (POODLE_LOCOMO_GPIO_BASE + 9)
+#define POODLE_GPIO_MUTE_L (POODLE_LOCOMO_GPIO_BASE + 10)
+#define POODLE_GPIO_MUTE_R (POODLE_LOCOMO_GPIO_BASE + 11)
#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..3041d83 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -30,6 +30,7 @@
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/memblock.h>
+#include <linux/mfd/locomo.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -48,7 +49,6 @@
#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
@@ -178,7 +178,17 @@ static struct resource locomo_resources[] = {
};
static struct locomo_platform_data locomo_info = {
- .irq_base = IRQ_BOARD_START,
+ .gpio_data = {
+ .gpio_base = POODLE_LOCOMO_GPIO_BASE,
+ },
+ .bl_data = {
+ .comadj = 118,
+ .gpio_lcd_vsha_on = POODLE_GPIO_LCD_VSHA_ON,
+ .gpio_lcd_vshd_on = POODLE_GPIO_LCD_VSHD_ON,
+ .gpio_lcd_vee_on = POODLE_GPIO_LCD_VEE_ON,
+ .gpio_lcd_mod = POODLE_GPIO_LCD_MOD,
+ .gpio_fl_vr = POODLE_GPIO_FL_VR,
+ },
};
struct platform_device poodle_locomo_device = {
@@ -191,8 +201,6 @@ struct platform_device poodle_locomo_device = {
},
};
-EXPORT_SYMBOL(poodle_locomo_device);
-
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master poodle_spi_info = {
.num_chipselect = 1,
@@ -444,6 +452,9 @@ static void __init poodle_init(void)
platform_scoop_config = &poodle_pcmcia_config;
+ if (sharpsl_param.comadj != -1)
+ locomo_info.bl_data.comadj = sharpsl_param.comadj;
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
pr_warning("poodle: Unable to register LoCoMo device\n");
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
