> -The new patch adds a 'global' LED to the DualShock 4 for synchronously > controlling the whole light bar and setting hardware blink rate. Under > the > old system where all of the LEDs mapped to one global blink rate > triggers > would constantly override each other if different ones were assigned to > different color LEDs and triggers that run their own timers and adjust > the > brightness directly couldn't be synchronously applied to the whole light > bar. > Now, the global LED controls the hardware blink rate and can > synchronously > toggle the state of the whole light bar without disturbing the > individual > colors. Additionally, if the user wants to apply different triggers to > the individual colors, that works as well. Hi all, I tested these patches again my controllers (USB connected DS4, DS3-SA and Intec) and they seem to work OK. I did see some weirdness with DS4, however I think that this is probably unavoidable with current LED class and this controller - it probably needs some overall discussion how the LED class treats RGB leds. I'd suggest that we use this patch series. Thanks, Simon. <tested-by> Simon Wood <simon@xxxxxxxxxxxxx>
DS4 failure when using 'global/timer', only reset by unplugging controller -- # echo 80 > 0003\:054C\:05C4.0007\:green/brightness [green] # echo timer > 0003\:054C\:05C4.0007\:global/trigger [flashing green] # echo none > 0003\:054C\:05C4.0007\:global/trigger [off] # echo 80 > 0003\:054C\:05C4.0007\:green/brightness [off????] -- DS3SA weirdness before PS button pressed (no jstest activity), works OK afer PS button is pressed -- [all flashing] # echo 1 > 0003\:054C\:0268.0008\:\:sony1/brightness [1 lit] [after a few sec starts all flashing] -- DSA3SA wrong led, controller plugged in while 'on'. Only happened sometimes -- [1 lit automatically] # echo 1 > 0003\:054C\:0268.0009\:\:sony1/brightness [1 lit] # echo 2 > 0003\:054C\:0268.0009\:\:sony2/brightness [1+3 lit???] -- Intec flashing does not (which we knew anyhow/expected) -- # echo 1 > 0003\:054C\:0268.000D\:\:sony1/brightness [1 lit] # echo timer > 0003\:054C\:0268.000D\:\:sony1/trigger [1 lit, not flashing] --
