Re: [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 27, 2013 at 01:49:14PM +0100, Nick Dyer wrote:
> Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
> Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
> ---
>  drivers/input/touchscreen/atmel_mxt_ts.c |   95 +++++++++++++++++++++++++++++-
>  1 file changed, 94 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index b63f227..2e6118a 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -78,6 +78,7 @@
>  #define MXT_SPT_DIGITIZER_T43		43
>  #define MXT_SPT_MESSAGECOUNT_T44	44
>  #define MXT_SPT_CTECONFIG_T46		46
> +#define MXT_PROCI_ACTIVE_STYLUS_T63	63
>  
>  /* MXT_GEN_MESSAGE_T5 object */
>  #define MXT_RPTID_NOMSG		0xff
> @@ -190,6 +191,19 @@ struct t9_range {
>  /* Define for MXT_PROCI_TOUCHSUPPRESSION_T42 */
>  #define MXT_T42_MSG_TCHSUP	(1 << 0)
>  
> +/* T63 Stylus */
> +#define MXT_T63_STYLUS_PRESS	(1 << 0)
> +#define MXT_T63_STYLUS_RELEASE	(1 << 1)
> +#define MXT_T63_STYLUS_MOVE		(1 << 2)
> +#define MXT_T63_STYLUS_SUPPRESS	(1 << 3)
> +
> +#define MXT_T63_STYLUS_DETECT	(1 << 4)
> +#define MXT_T63_STYLUS_TIP		(1 << 5)
> +#define MXT_T63_STYLUS_ERASER	(1 << 6)
> +#define MXT_T63_STYLUS_BARREL	(1 << 7)
> +
> +#define MXT_T63_STYLUS_PRESSURE_MASK	0x3F
> +
>  /* Delay times */
>  #define MXT_BACKUP_TIME		50	/* msec */
>  #define MXT_RESET_TIME		200	/* msec */
> @@ -260,6 +274,7 @@ struct mxt_data {
>  	bool update_input;
>  	u8 last_message_count;
>  	u8 num_touchids;
> +	u8 num_stylusids;
>  
>  	/* Cached parameters from object table */
>  	u16 T5_address;
> @@ -274,6 +289,8 @@ struct mxt_data {
>  	u8 T42_reportid_max;
>  	u16 T44_address;
>  	u8 T48_reportid;
> +	u8 T63_reportid_min;
> +	u8 T63_reportid_max;
>  
>  	/* for fw update in bootloader */
>  	struct completion bl_completion;
> @@ -823,6 +840,63 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
>  	return 0;
>  }
>  
> +static void mxt_proc_t63_messages(struct mxt_data *data, u8 *msg)
> +{
> +	struct device *dev = &data->client->dev;
> +	struct input_dev *input_dev = data->input_dev;
> +	u8 id;
> +	u16 x, y;
> +	u8 pressure;
> +
> +	/* do not report events if input device not yet registered */
> +	if (!data->enable_reporting)
> +		return;
> +
> +	/* stylus slots come after touch slots */
> +	id = data->num_touchids + (msg[0] - data->T63_reportid_min);
> +
> +	if (id < 0 || id > (data->num_touchids + data->num_stylusids)) {
> +		dev_err(dev, "invalid stylus id %d, max slot is %d\n",
> +			id, data->num_stylusids);
> +		return;
> +	}
> +
> +	x = msg[3] | (msg[4] << 8);
> +	y = msg[5] | (msg[6] << 8);
> +	pressure = msg[7] & MXT_T63_STYLUS_PRESSURE_MASK;
> +
> +	dev_dbg(dev,
> +		"[%d] %c%c%c%c x: %d y: %d pressure: %d stylus:%c%c%c%c\n",
> +		id,
> +		(msg[1] & MXT_T63_STYLUS_SUPPRESS) ? 'S' : '.',
> +		(msg[1] & MXT_T63_STYLUS_MOVE)     ? 'M' : '.',
> +		(msg[1] & MXT_T63_STYLUS_RELEASE)  ? 'R' : '.',
> +		(msg[1] & MXT_T63_STYLUS_PRESS)    ? 'P' : '.',
> +		x, y, pressure,
> +		(msg[2] & MXT_T63_STYLUS_BARREL) ? 'B' : '.',
> +		(msg[2] & MXT_T63_STYLUS_ERASER) ? 'E' : '.',
> +		(msg[2] & MXT_T63_STYLUS_TIP)    ? 'T' : '.',
> +		(msg[2] & MXT_T63_STYLUS_DETECT) ? 'D' : '.');
> +
> +	input_mt_slot(input_dev, id);
> +
> +	if (msg[2] & MXT_T63_STYLUS_DETECT) {
> +		input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 1);
> +		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> +		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> +		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
> +	} else {
> +		input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 0);
> +	}
> +
> +	input_report_key(input_dev, BTN_STYLUS,
> +			 (msg[2] & MXT_T63_STYLUS_ERASER));
> +	input_report_key(input_dev, BTN_STYLUS2,
> +			 (msg[2] & MXT_T63_STYLUS_BARREL));
> +
> +	mxt_input_sync(input_dev);
> +}
> +
>  static int mxt_proc_message(struct mxt_data *data, u8 *message)
>  {
>  	u8 report_id = message[0];
> @@ -838,6 +912,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
>  	} else if (report_id == data->T19_reportid) {
>  		mxt_input_button(data, message);
>  		data->update_input = true;
> +	} else if (report_id >= data->T63_reportid_min
> +		   && report_id <= data->T63_reportid_max) {
> +		mxt_proc_t63_messages(data, message);
>  	} else if (report_id >= data->T42_reportid_min
>  		   && report_id <= data->T42_reportid_max) {
>  		mxt_proc_t42_messages(data, message);
> @@ -1483,6 +1560,8 @@ static void mxt_free_object_table(struct mxt_data *data)
>  	data->T42_reportid_max = 0;
>  	data->T44_address = 0;
>  	data->T48_reportid = 0;
> +	data->T63_reportid_min = 0;
> +	data->T63_reportid_max = 0;
>  	data->max_reportid = 0;
>  }
>  
> @@ -1563,6 +1642,12 @@ static int mxt_get_object_table(struct mxt_data *data)
>  		case MXT_PROCG_NOISESUPPRESSION_T48:
>  			data->T48_reportid = min_id;
>  			break;
> +		case MXT_PROCI_ACTIVE_STYLUS_T63:
> +			data->T63_reportid_min = min_id;
> +			data->T63_reportid_max = max_id;
> +			data->num_stylusids = object->num_report_ids
> +						* mxt_obj_instances(object);
> +			break;
>  		}
>  
>  		end_address = object->start_address
> @@ -2103,7 +2188,7 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
>  			     0, 255, 0, 0);
>  
>  	/* For multi touch */
> -	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
> +	num_mt_slots = data->num_touchids + data->num_stylusids;
>  	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
>  	if (error) {
>  		dev_err(dev, "Error %d initialising slots\n", error);
> @@ -2121,6 +2206,14 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
>  	input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
>  			     0, 255, 0, 0);
>  
> +	/* For T63 active stylus */
> +	if (data->T63_reportid_min) {
> +		input_set_capability(input_dev, EV_KEY, BTN_STYLUS);
> +		input_set_capability(input_dev, EV_KEY, BTN_STYLUS2);
> +		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
> +			0, MT_TOOL_MAX, 0, 0);
> +	}
> +
>  	input_set_drvdata(input_dev, data);
>  
>  	error = input_register_device(input_dev);
> -- 
> 1.7.10.4
> 

    Reviewed-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>

Thanks,
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux