Atmel updates to atmel_mxt_ts touch controller driver - v6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: Atmel updates to atmel_mxt_ts touch controller driver - v6
From: Nick Dyer <nick.dyer@xxxxxxxxxxx>
Date: Thu, 27 Jun 2013 13:48:35 +0100
Cc: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>, Henrik Rydberg <rydberg@xxxxxxxxxxx>, Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>, Alan Bowens <Alan.Bowens@xxxxxxxxx>, linux-input@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, Peter Meerwald <pmeerw@xxxxxxxxxx>, Benson Leung <bleung@xxxxxxxxxxxx>, Olof Johansson <olofj@xxxxxxxxxxxx>

Some minor updates to these patches to address review comments. I've rebased
them on the latest dtor/next tree.

Input: atmel_mxt_ts - Verify Information Block checksum on probe
- Fix bug which might cause erroneous debug output due to use of krealloc (thanks to
  Yufeng Shen for spotting this)

Input: atmel_mxt_ts - Implement T63 Active Stylus support
- Add T63 to #defines since there will be other active stylus objects

Input: atmel_mxt_ts - Implement debug output for messages
Input: atmel_mxt_ts - Add memory access interface via sysfs
- remove from series (move mem_size calculation)

-- 
Nick Dyer Senior Software Engineer
ITDev Hardware and Software Development Consultancy http://www.itdev.co.uk

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Follow-Ups:
- Re: Atmel updates to atmel_mxt_ts touch controller driver - v6
  - From: rydberg
- Re: Atmel updates to atmel_mxt_ts touch controller driver - v6
  - From: Nick Dyer
- [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data
  - From: Nick Dyer
- [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling
  - From: Nick Dyer
- [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances
  - From: Nick Dyer
- [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails
  - From: Nick Dyer
- [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader
  - From: Nick Dyer
- [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code
  - From: Nick Dyer
- [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets
  - From: Nick Dyer
- [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips
  - From: Nick Dyer
- [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing
  - From: Nick Dyer
- [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug
  - From: Nick Dyer
- [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data
  - From: Nick Dyer
- [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses
  - From: Nick Dyer
- [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version
  - From: Nick Dyer
- [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader
  - From: Nick Dyer
- [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries
  - From: Nick Dyer
- [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file
  - From: Nick Dyer
- [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format
  - From: Nick Dyer
- [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output
  - From: Nick Dyer
- [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip
  - From: Nick Dyer
- [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata
  - From: Nick Dyer
- [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function
  - From: Nick Dyer
- [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9
  - From: Nick Dyer
- [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message
  - From: Nick Dyer
- [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped
  - From: Nick Dyer
- [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec
  - From: Nick Dyer
- [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function
  - From: Nick Dyer
- [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup
  - From: Nick Dyer
- [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked
  - From: Nick Dyer
- [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips
  - From: Nick Dyer
- [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe
  - From: Nick Dyer
- [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size
  - From: Nick Dyer
- [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling
  - From: Nick Dyer
- [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages
  - From: Nick Dyer
- [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression
  - From: Nick Dyer
- [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions
  - From: Nick Dyer
- [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression
  - From: Nick Dyer
- [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support
  - From: Nick Dyer
- [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries
  - From: Nick Dyer
- [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array
  - From: Nick Dyer
- [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support
  - From: Nick Dyer
- [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines
  - From: Nick Dyer
- [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe
  - From: Nick Dyer
- [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW
  - From: Nick Dyer
- [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend
  - From: Nick Dyer
- [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg
  - From: Nick Dyer
- [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object
  - From: Nick Dyer
- [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support
  - From: Nick Dyer
- [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object
  - From: Nick Dyer
- [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance
  - From: Nick Dyer
- [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs
  - From: Nick Dyer
- [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name
  - From: Nick Dyer

Prev by Date: Re: [PATCH v2 1/2] input: document gamepad API and add extra keycodes
Next by Date: [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name
Previous by thread: Re: [PATCH] Added a check for NULL pointer in hid_add_device
Next by thread: [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name
Index(es):
- Date
- Thread

[Index of Archives] [Linux Media Devel] [Linux USB Devel] [Video for Linux] [Linux Audio Users] [Yosemite News] [Linux Kernel] [Linux SCSI] [Linux Wireless Networking] [Linux Omap]