From: Benson Leung <bleung@xxxxxxxxxxxx>
Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the
transition to bootloader mode and the transition back from app, wait for the
CHG assert to indicate that the transition is done.
This change replaces the msleep with a wait for completion that the
mxt_interrupt handler signals.
Also add CHG poll after last firmware frame - some bootloader versions will
assert the interrupt line after the final frame, in testing this meant that
the driver attempts to read the info block too early whilst the chip is still
resetting.
This improves firmware update time as we no longer wait longer than necessary
for each reset.
Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 3f75e8c..55d7667 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -181,8 +181,8 @@
#define MXT_BACKUP_VALUE 0x55
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_TIME 200 /* msec */
-
-#define MXT_FWRESET_TIME 175 /* msec */
+#define MXT_FW_RESET_TIME 3000 /* msec */
+#define MXT_FW_CHG_TIMEOUT 300 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -376,7 +376,7 @@ recheck:
* CHG assertion before reading the status byte.
* Once the status byte has been read, the line is deasserted.
*/
- ret = mxt_wait_for_chg(data, 300);
+ ret = mxt_wait_for_chg(data, MXT_FW_CHG_TIMEOUT);
if (ret) {
/*
* TODO: handle -EINTR better by terminating fw update
@@ -1048,6 +1048,15 @@ static int mxt_load_fw(struct device *dev, const char *fn)
dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
}
+ /* Wait for flash. */
+ ret = mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+ if (ret)
+ goto disable_irq;
+
+ /* Wait for device to reset. Some bootloader versions do not assert
+ * the CHG line after bootloading has finished, so ignore error */
+ mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+
data->in_bootloader = false;
disable_irq:
@@ -1076,10 +1085,6 @@ static ssize_t mxt_update_fw_store(struct device *dev,
count = error;
} else {
dev_dbg(dev, "The firmware update succeeded\n");
-
- /* Wait for reset */
- msleep(MXT_FWRESET_TIME);
-
mxt_free_object_table(data);
mxt_initialize(data);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
