Re: [PATCH v3 1/2] Input: atmel_mxt_ts - Support for touchpad variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Benson,

> From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
> 
> This same driver can be used by atmel based touchscreens and touchpads
> (buttonpads). Platform data may specify a device is a touchpad
> using the is_tp flag.
> 
> This will cause the driver to perform some touchpad specific
> initializations, such as:
>   * register input device name "Atmel maXTouch Touchpad" instead of
>   Touchscreen.
>   * register BTN_LEFT & BTN_TOOL_* event types.
>   * register axis resolution (as a fixed constant, for now)
>   * register BUTTONPAD property
>   * process GPIO buttons using reportid T19
> 
> Input event GPIO mapping is done by the platform data key_map array.
> 
> key_map[x] should contain the KEY or BTN code to send when processing
> GPIOx from T19. To specify a GPIO as not an input source, populate
> with KEY_RESERVED, or 0.
> 
> Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
> Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
> Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
> Tested-by: Olof Johansson <olof@xxxxxxxxx>
> ---
> v3: Add key_map array to map gpios to keys or buttons. Configure is_tp from
>     pdata.
> v2: zero reportid in mxt_object_table_free(), Thanks nick.dyer@xxxxxxxxxxx
> v1: Initial
> ---
>  drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++++++++++++++++++-
>  include/linux/i2c/atmel_mxt_ts.h         |  5 +++
>  2 files changed, 68 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index d04f810..feafbb8 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -181,6 +181,12 @@
>  
>  #define MXT_FWRESET_TIME	175	/* msec */
>  
> +/* MXT_SPT_GPIOPWM_T19 field */
> +#define MXT_GPIO0_MASK		0x04
> +#define MXT_GPIO1_MASK		0x08
> +#define MXT_GPIO2_MASK		0x10
> +#define MXT_GPIO3_MASK		0x20

Since these are not used individually, but treated as a bit field in
the code, a single bit index would suffice.

> +
>  /* Command to unlock bootloader */
>  #define MXT_UNLOCK_CMD_MSB	0xaa
>  #define MXT_UNLOCK_CMD_LSB	0xdc
> @@ -212,6 +218,8 @@
>  /* Touchscreen absolute values */
>  #define MXT_MAX_AREA		0xff
>  
> +#define MXT_PIXELS_PER_MM	20
> +
>  struct mxt_info {
>  	u8 family_id;
>  	u8 variant_id;
> @@ -243,6 +251,8 @@ struct mxt_data {
>  	const struct mxt_platform_data *pdata;
>  	struct mxt_object *object_table;
>  	struct mxt_info info;
> +	bool is_tp;
> +
>  	unsigned int irq;
>  	unsigned int max_x;
>  	unsigned int max_y;
> @@ -251,6 +261,7 @@ struct mxt_data {
>  	u8 T6_reportid;
>  	u8 T9_reportid_min;
>  	u8 T9_reportid_max;
> +	u8 T19_reportid;
>  };
>  
>  static bool mxt_object_readable(unsigned int type)
> @@ -502,6 +513,22 @@ static int mxt_write_object(struct mxt_data *data,
>  	return mxt_write_reg(data->client, reg + offset, val);
>  }
>  
> +static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
> +{
> +	struct device *dev = &data->client->dev;
> +	struct input_dev *input = data->input_dev;
> +	bool button;
> +	int i;
> +
> +	/* Active-low switch */
> +	for (i = 0; i < MXT_NUM_GPIO; i++) {
> +		if (data->pdata->key_map[i] == KEY_RESERVED)
> +			continue;
> +		button = !(message->message[0] & MXT_GPIO0_MASK << i);

This looks unintended.

> +		input_report_key(input, data->pdata->key_map[i], button);
> +	}
> +}
> +
>  static void mxt_input_touchevent(struct mxt_data *data,
>  				      struct mxt_message *message, int id)
>  {
> @@ -585,6 +612,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
>  			int id = reportid - data->T9_reportid_min;
>  			mxt_input_touchevent(data, &message, id);
>  			update_input = true;
> +		} else if (message.reportid == data->T19_reportid) {
> +			mxt_input_button(data, &message);
> +			update_input = true;
>  		} else {
>  			mxt_dump_message(dev, &message);
>  		}
> @@ -764,6 +794,9 @@ static int mxt_get_object_table(struct mxt_data *data)
>  			data->T9_reportid_min = min_id;
>  			data->T9_reportid_max = max_id;
>  			break;
> +		case MXT_SPT_GPIOPWM_T19:
> +			data->T19_reportid = min_id;
> +			break;
>  		}
>  	}
>  
> @@ -777,7 +810,7 @@ static void mxt_free_object_table(struct mxt_data *data)
>  	data->T6_reportid = 0;
>  	data->T9_reportid_min = 0;
>  	data->T9_reportid_max = 0;
> -
> +	data->T19_reportid = 0;
>  }
>  
>  static int mxt_initialize(struct mxt_data *data)
> @@ -1115,9 +1148,13 @@ static int mxt_probe(struct i2c_client *client,
>  		goto err_free_mem;
>  	}
>  
> -	input_dev->name = "Atmel maXTouch Touchscreen";
> +	data->is_tp = pdata && pdata->is_tp;
> +
> +	input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
> +					  "Atmel maXTouch Touchscreen";
>  	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
>  		 client->adapter->nr, client->addr);
> +
>  	input_dev->phys = data->phys;
>  
>  	input_dev->id.bustype = BUS_I2C;
> @@ -1140,6 +1177,29 @@ static int mxt_probe(struct i2c_client *client,
>  	__set_bit(EV_KEY, input_dev->evbit);
>  	__set_bit(BTN_TOUCH, input_dev->keybit);
>  
> +	if (data->is_tp) {
> +		int i;
> +		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> +		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
> +
> +		for (i = 0; i < MXT_NUM_GPIO; i++)
> +			if (pdata->key_map[i] != KEY_RESERVED)
> +				__set_bit(pdata->key_map[i], input_dev->keybit);
> +
> +		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> +		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> +		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
> +		__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
> +		__set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
> +

It would be much preferred to have all these handled by input
_mt_init_slots() instead. For instance by adding the INPUT_MT_POINTER
flag. Also, the driver does not seem to handle touchpads properly, as
I cannot see the finger count sent anywhere.

> +		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
> +		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
> +		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
> +				  MXT_PIXELS_PER_MM);
> +		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
> +				  MXT_PIXELS_PER_MM);
> +	}
> +
>  	/* For single touch */
>  	input_set_abs_params(input_dev, ABS_X,
>  			     0, data->max_x, 0, 0);
> @@ -1258,6 +1318,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
>  static const struct i2c_device_id mxt_id[] = {
>  	{ "qt602240_ts", 0 },
>  	{ "atmel_mxt_ts", 0 },
> +	{ "atmel_mxt_tp", 0 },
>  	{ "mXT224", 0 },
>  	{ }
>  };
> diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
> index f027f7a..99e379b 100644
> --- a/include/linux/i2c/atmel_mxt_ts.h
> +++ b/include/linux/i2c/atmel_mxt_ts.h
> @@ -15,6 +15,9 @@
>  
>  #include <linux/types.h>
>  
> +/* For key_map array */
> +#define MXT_NUM_GPIO		4
> +
>  /* Orient */
>  #define MXT_NORMAL		0x0
>  #define MXT_DIAGONAL		0x1
> @@ -39,6 +42,8 @@ struct mxt_platform_data {
>  	unsigned int voltage;
>  	unsigned char orient;
>  	unsigned long irqflags;
> +	bool is_tp;
> +	const unsigned int key_map[MXT_NUM_GPIO];
>  };
>  
>  #endif /* __LINUX_ATMEL_MXT_TS_H */
> -- 
> 1.8.1.3
> 

Thanks,
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux