From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
This same driver can be used by atmel based touchscreens and touchpads
(buttonpads). Platform data may specify a device is a touchpad
using the is_tp flag.
This will cause the driver to perform some touchpad specific
initializations, such as:
* register input device name "Atmel maXTouch Touchpad" instead of
Touchscreen.
* register BTN_LEFT & BTN_TOOL_* event types.
* register axis resolution (as a fixed constant, for now)
* register BUTTONPAD property
* process GPIO buttons using reportid T19
Input event GPIO mapping is done by the platform data key_map array.
key_map[x] should contain the KEY or BTN code to send when processing
GPIOx from T19. To specify a GPIO as not an input source, populate
with KEY_RESERVED, or 0.
Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
Tested-by: Olof Johansson <olof@xxxxxxxxx>
---
v3: Add key_map array to map gpios to keys or buttons. Configure is_tp from
pdata.
v2: zero reportid in mxt_object_table_free(), Thanks nick.dyer@xxxxxxxxxxx
v1: Initial
---
drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++++++++++++++++++-
include/linux/i2c/atmel_mxt_ts.h | 5 +++
2 files changed, 68 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d04f810..feafbb8 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -181,6 +181,12 @@
#define MXT_FWRESET_TIME 175 /* msec */
+/* MXT_SPT_GPIOPWM_T19 field */
+#define MXT_GPIO0_MASK 0x04
+#define MXT_GPIO1_MASK 0x08
+#define MXT_GPIO2_MASK 0x10
+#define MXT_GPIO3_MASK 0x20
+
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
#define MXT_UNLOCK_CMD_LSB 0xdc
@@ -212,6 +218,8 @@
/* Touchscreen absolute values */
#define MXT_MAX_AREA 0xff
+#define MXT_PIXELS_PER_MM 20
+
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -243,6 +251,8 @@ struct mxt_data {
const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
+ bool is_tp;
+
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
@@ -251,6 +261,7 @@ struct mxt_data {
u8 T6_reportid;
u8 T9_reportid_min;
u8 T9_reportid_max;
+ u8 T19_reportid;
};
static bool mxt_object_readable(unsigned int type)
@@ -502,6 +513,22 @@ static int mxt_write_object(struct mxt_data *data,
return mxt_write_reg(data->client, reg + offset, val);
}
+static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
+{
+ struct device *dev = &data->client->dev;
+ struct input_dev *input = data->input_dev;
+ bool button;
+ int i;
+
+ /* Active-low switch */
+ for (i = 0; i < MXT_NUM_GPIO; i++) {
+ if (data->pdata->key_map[i] == KEY_RESERVED)
+ continue;
+ button = !(message->message[0] & MXT_GPIO0_MASK << i);
+ input_report_key(input, data->pdata->key_map[i], button);
+ }
+}
+
static void mxt_input_touchevent(struct mxt_data *data,
struct mxt_message *message, int id)
{
@@ -585,6 +612,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
int id = reportid - data->T9_reportid_min;
mxt_input_touchevent(data, &message, id);
update_input = true;
+ } else if (message.reportid == data->T19_reportid) {
+ mxt_input_button(data, &message);
+ update_input = true;
} else {
mxt_dump_message(dev, &message);
}
@@ -764,6 +794,9 @@ static int mxt_get_object_table(struct mxt_data *data)
data->T9_reportid_min = min_id;
data->T9_reportid_max = max_id;
break;
+ case MXT_SPT_GPIOPWM_T19:
+ data->T19_reportid = min_id;
+ break;
}
}
@@ -777,7 +810,7 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T6_reportid = 0;
data->T9_reportid_min = 0;
data->T9_reportid_max = 0;
-
+ data->T19_reportid = 0;
}
static int mxt_initialize(struct mxt_data *data)
@@ -1115,9 +1148,13 @@ static int mxt_probe(struct i2c_client *client,
goto err_free_mem;
}
- input_dev->name = "Atmel maXTouch Touchscreen";
+ data->is_tp = pdata && pdata->is_tp;
+
+ input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
+ "Atmel maXTouch Touchscreen";
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
client->adapter->nr, client->addr);
+
input_dev->phys = data->phys;
input_dev->id.bustype = BUS_I2C;
@@ -1140,6 +1177,29 @@ static int mxt_probe(struct i2c_client *client,
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
+ if (data->is_tp) {
+ int i;
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+ __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+ for (i = 0; i < MXT_NUM_GPIO; i++)
+ if (pdata->key_map[i] != KEY_RESERVED)
+ __set_bit(pdata->key_map[i], input_dev->keybit);
+
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
+
+ input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+ MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+ MXT_PIXELS_PER_MM);
+ }
+
/* For single touch */
input_set_abs_params(input_dev, ABS_X,
0, data->max_x, 0, 0);
@@ -1258,6 +1318,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
static const struct i2c_device_id mxt_id[] = {
{ "qt602240_ts", 0 },
{ "atmel_mxt_ts", 0 },
+ { "atmel_mxt_tp", 0 },
{ "mXT224", 0 },
{ }
};
diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
index f027f7a..99e379b 100644
--- a/include/linux/i2c/atmel_mxt_ts.h
+++ b/include/linux/i2c/atmel_mxt_ts.h
@@ -15,6 +15,9 @@
#include <linux/types.h>
+/* For key_map array */
+#define MXT_NUM_GPIO 4
+
/* Orient */
#define MXT_NORMAL 0x0
#define MXT_DIAGONAL 0x1
@@ -39,6 +42,8 @@ struct mxt_platform_data {
unsigned int voltage;
unsigned char orient;
unsigned long irqflags;
+ bool is_tp;
+ const unsigned int key_map[MXT_NUM_GPIO];
};
#endif /* __LINUX_ATMEL_MXT_TS_H */
--
1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
