On Fri, Nov 30, 2012 at 10:46:07AM +0400, Alexander Shiyan wrote:
> ...
> > I think the driver should look like in the patch below. Can you please
> > tell me if it works for you?
> ...
>
> Can you please send me patch as attachment?
>
Sure, however do you know that if you were to simply save the original
email and fed it to "patch" command it would pick up the diff and apply
it?
Thanks.
--
Dmitry
Input: Add new driver for GPIO beeper
From: Alexander Shiyan <shc_work@xxxxxxx>
This patch adds a new driver for the beeper controlled via GPIO pin.
The driver does not depend on the architecture and is positioned as
a replacement for the specific drivers that are used for this function,
for example drivers/input/misc/ixp4xx-beeper.
Since this patch is RFC only, inline comments are welcome.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/misc/Kconfig | 9 +
drivers/input/misc/Makefile | 1
drivers/input/misc/gpio-beeper.c | 154 +++++++++++++++++++++++
include/linux/platform_data/input-gpio-beeper.h | 20 +++
4 files changed, 184 insertions(+)
create mode 100644 drivers/input/misc/gpio-beeper.c
create mode 100644 include/linux/platform_data/input-gpio-beeper.h
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6d2bf0c..0d9b0eb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -219,6 +219,15 @@ config INPUT_GP2A
To compile this driver as a module, choose M here: the
module will be called gp2ap002a00f.
+config INPUT_GPIO_BEEPER
+ tristate "Generic GPIO beeper support"
+ depends on GPIOLIB
+ help
+ Say Y here if you have a beeper connected to a GPIO pin.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_beeper.
+
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
depends on GENERIC_GPIO
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1f874af..662b39a 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
+obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c
new file mode 100644
index 0000000..3408d43
--- /dev/null
+++ b/drivers/input/misc/gpio-beeper.c
@@ -0,0 +1,154 @@
+/*
+ * Generic GPIO beeper driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/platform_data/input-gpio-beeper.h>
+
+struct gpio_beeper {
+ struct input_dev *input;
+ struct work_struct work;
+ char phys[32];
+ int gpio_nr;
+ bool active_low;
+ bool beeping;
+};
+
+static void gpio_beeper_toggle(struct gpio_beeper *beeper, bool on)
+{
+ gpio_set_value_cansleep(beeper->gpio_nr, on ^ beeper->active_low);
+}
+
+static void gpio_beeper_work(struct work_struct *work)
+{
+ struct gpio_beeper *beeper =
+ container_of(work, struct gpio_beeper, work);
+
+ gpio_beeper_toggle(beeper, beeper->beeping);
+}
+
+static int gpio_beeper_event(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+ struct gpio_beeper *beeper = input_get_drvdata(dev);
+
+ if (type != EV_SND || code != SND_BELL)
+ return -ENOTSUPP;
+
+ if (value < 0)
+ return -EINVAL;
+
+ beeper->beeping = value;
+ /* Schedule work to actually turn the beeper on or off */
+ schedule_work(&beeper->work);
+
+ return 0;
+}
+
+static void gpio_beeper_close(struct input_dev *input)
+{
+ struct gpio_beeper *beeper = input_get_drvdata(input);
+
+ cancel_work_sync(&beeper->work);
+ gpio_beeper_toggle(beeper, false);
+}
+
+static int gpio_beeper_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct gpio_beeper_pdata *pdata = dev_get_platdata(dev);
+ struct gpio_beeper *beeper;
+ struct input_dev *input;
+ int error;
+
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ return -EINVAL;
+ }
+
+ if (!gpio_is_valid(pdata->gpio_nr)) {
+ dev_err(dev, "Invalid gpio %i\n", pdata->gpio_nr);
+ return -EINVAL;
+ }
+
+ beeper = devm_kzalloc(&pdev->dev, sizeof(struct gpio_beeper),
+ GFP_KERNEL);
+ if (!beeper) {
+ dev_err(dev, "Memory allocate error\n");
+ return -ENOMEM;
+ }
+
+ beeper->gpio_nr = pdata->gpio_nr;
+ beeper->active_low = pdata->active_low;
+
+ INIT_WORK(&beeper->work, gpio_beeper_work);
+ snprintf(beeper->phys, sizeof(beeper->phys),
+ "%s/input0", dev_name(dev));
+
+ input = devm_input_allocate_device(dev);
+ if (!input) {
+ dev_err(&pdev->dev, "Input device allocate error\n");
+ return -ENOMEM;
+ }
+
+ input->name = pdata->name ?: "GPIO Beeper";
+ input->phys = beeper->phys;
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ input->close = gpio_beeper_close;
+ input->event = gpio_beeper_event;
+
+ input_set_capability(input, EV_SND, SND_BELL);
+
+ error = devm_gpio_request(dev, beeper->gpio_nr, input->name);
+ if (error) {
+ dev_err(dev, "Unable to claim gpio %i\n", beeper->gpio_nr);
+ return error;
+ }
+
+ gpio_direction_output(beeper->gpio_nr, beeper->active_low);
+
+ beeper->input = input;
+ input_set_drvdata(input, beeper);
+ platform_set_drvdata(pdev, beeper);
+
+ return input_register_device(beeper->input);
+}
+
+static void gpio_beeper_shutdown(struct platform_device *pdev)
+{
+ struct gpio_beeper *beeper = platform_get_drvdata(pdev);
+
+ /* Turning OFF immediately */
+ gpio_beeper_close(beeper->input);
+}
+
+static struct platform_driver gpio_beeper_platform_driver = {
+ .driver = {
+ .name = "gpio-beeper",
+ .owner = THIS_MODULE,
+ },
+ .probe = gpio_beeper_probe,
+ .shutdown = gpio_beeper_shutdown,
+};
+module_platform_driver(gpio_beeper_platform_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@xxxxxxx>");
+MODULE_DESCRIPTION("Generic GPIO beeper driver");
diff --git a/include/linux/platform_data/input-gpio-beeper.h b/include/linux/platform_data/input-gpio-beeper.h
new file mode 100644
index 0000000..9eb4362
--- /dev/null
+++ b/include/linux/platform_data/input-gpio-beeper.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PLATFORM_DATA_INPUT_GPIO_BEEPER_H_
+#define __PLATFORM_DATA_INPUT_GPIO_BEEPER_H_
+
+/* gpio-beeper platform data structure */
+struct gpio_beeper_pdata {
+ const char *name; /* Name of device (Optional) */
+ int gpio_nr; /* GPIO number */
+ int active_low:1; /* Set if active level is LOW */
+};
+
+#endif
