* Aaro Koskinen <aaro.koskinen@xxxxxx> [121031 11:07]:
> Add Retu power button driver.
Added Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> to cc so he knows
to pick this after no more comments. You may need to resend.
Regards,
Tony
> Cc: linux-input@xxxxxxxxxxxxxxx
> Acked-by: Felipe Balbi <balbi@xxxxxx>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
> ---
> drivers/input/misc/Kconfig | 10 +++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/retu-pwrbutton.c | 118 +++++++++++++++++++++++++++++++++++
> 3 files changed, 129 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/misc/retu-pwrbutton.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 7c0f1ec..e5be189 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -367,6 +367,16 @@ config INPUT_CM109
> To compile this driver as a module, choose M here: the module will be
> called cm109.
>
> +config INPUT_RETU_PWRBUTTON
> + tristate "Retu Power button Driver"
> + depends on MFD_RETU
> + help
> + Say Y here if you want to enable power key reporting via the
> + Retu chips found in Nokia Internet Tablets (770, N800, N810).
> +
> + To compile this driver as a module, choose M here. The module will
> + be called retu-pwrbutton.
> +
> config INPUT_TWL4030_PWRBUTTON
> tristate "TWL4030 Power button Driver"
> depends on TWL4030_CORE
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 83fe6f5..4fbee0d 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
> obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
> obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
> obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
> +obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
> obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
> new file mode 100644
> index 0000000..51e94a7
> --- /dev/null
> +++ b/drivers/input/misc/retu-pwrbutton.c
> @@ -0,0 +1,118 @@
> +/*
> + * Retu power button driver.
> + *
> + * Copyright (C) 2004-2010 Nokia Corporation
> + *
> + * Original code written by Ari Saastamoinen, Juha Yrjölä and Felipe Balbi.
> + * Rewritten by Aaro Koskinen.
> + *
> + * This file is subject to the terms and conditions of the GNU General
> + * Public License. See the file "COPYING" in the main directory of this
> + * archive for more details.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/errno.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mfd/retu.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +
> +#define RETU_STATUS_PWRONX (1 << 5)
> +
> +struct retu_pwrbutton {
> + struct input_dev *idev;
> + struct retu_dev *rdev;
> + struct device *dev;
> + bool pressed;
> + int irq;
> +};
> +
> +static irqreturn_t retu_pwrbutton_irq(int irq, void *_pwr)
> +{
> + struct retu_pwrbutton *pwr = _pwr;
> + bool state;
> +
> + state = !(retu_read(pwr->rdev, RETU_REG_STATUS) & RETU_STATUS_PWRONX);
> +
> + if (pwr->pressed != state) {
> + input_report_key(pwr->idev, KEY_POWER, state);
> + input_sync(pwr->idev);
> + pwr->pressed = state;
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit retu_pwrbutton_probe(struct platform_device *pdev)
> +{
> + struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
> + struct retu_pwrbutton *pwr;
> + int ret;
> +
> + pwr = devm_kzalloc(&pdev->dev, sizeof(*pwr), GFP_KERNEL);
> + if (!pwr)
> + return -ENOMEM;
> +
> + pwr->rdev = rdev;
> + pwr->dev = &pdev->dev;
> + pwr->irq = platform_get_irq(pdev, 0);
> + platform_set_drvdata(pdev, pwr);
> +
> + ret = devm_request_threaded_irq(&pdev->dev, pwr->irq, NULL,
> + retu_pwrbutton_irq, 0, "retu-pwrbutton",
> + pwr);
> + if (ret < 0)
> + return ret;
> +
> + pwr->idev = input_allocate_device();
> + if (!pwr->idev)
> + return -ENOMEM;
> +
> + pwr->idev->evbit[0] = BIT_MASK(EV_KEY);
> + pwr->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
> + pwr->idev->name = "retu-pwrbutton";
> +
> + ret = input_register_device(pwr->idev);
> + if (ret < 0) {
> + input_free_device(pwr->idev);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __devexit retu_pwrbutton_remove(struct platform_device *pdev)
> +{
> + struct retu_pwrbutton *pwr = platform_get_drvdata(pdev);
> +
> + input_unregister_device(pwr->idev);
> + input_free_device(pwr->idev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver retu_pwrbutton_driver = {
> + .probe = retu_pwrbutton_probe,
> + .remove = __devexit_p(retu_pwrbutton_remove),
> + .driver = {
> + .name = "retu-pwrbutton",
> + },
> +};
> +module_platform_driver(retu_pwrbutton_driver);
> +
> +MODULE_ALIAS("platform:retu-pwrbutton");
> +MODULE_DESCRIPTION("Retu Power Button");
> +MODULE_AUTHOR("Ari Saastamoinen");
> +MODULE_AUTHOR("Felipe Balbi");
> +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@xxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 1.7.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
