On Wed, 19 Sep 2012 12:59:46 -0400
David Dillow <dave@xxxxxxxxxxxxxx> wrote:
> On Wed, 2012-09-19 at 18:48 +0200, Antonio Ospite wrote:
> > On Mon, 17 Sep 2012 21:33:58 -0400
> > David Dillow <dave@xxxxxxxxxxxxxx> wrote:
>
> > While on the remote I see:
> >
> > I press '1' and keep it pressed:
> > Event: time 1348069656.505528, type 1 (EV_KEY), code 2 (KEY_1), value 1
> > 1111111111...
> >
> > I press '2' and release it ('1' is sent):
> > Event: time 1348069666.025543, type 1 (EV_KEY), code 2 (KEY_1), value 0
> > Event: time 1348069668.395531, type 1 (EV_KEY), code 2 (KEY_1), value 1
> > 1111111111...
> >
> > I release '1':
> > Event: time 1348069671.625541, type 1 (EV_KEY), code 2 (KEY_1), value 0
> >
> > I don't know at what level this behavior is enforced.
> >
> > I will test later with the old raw_event callback and the fix to the
> > descriptor you suggested in the other mail.
>
> Please capture the raw reports
> from /sys/kernel/debug/hid/0005:*:0306:*/events when pressing multiple
> keys -- and tell me which ones they were. You may need to mount debugfs
> to get to this path.
>
I used hidraw which is equivalent in this case.
$ sudo cat /dev/hidraw1 | hexdump -e '12/1 "%02X " "\n"'
I press and release 'Play'
01 00 00 00 32 FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
I press and release 'Stop'
01 00 00 00 32 FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
I press 'Play', keep it pressed and press 'Stop'
01 00 00 00 32 FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 01 05
I release 'Stop' and then release 'Play'
01 00 00 00 32 FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
So this combination cannot be detected at all, but:
I press and release 'Triangle'
01 00 10 00 5C FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
I press and release 'Circle'
01 00 20 00 5D FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
I press 'Triangle', keep it pressed and press 'Circle'
01 00 10 00 5C FF FF FF FF FF 01 05
01 00 30 00 FF FF FF FF FF FF 01 05
I release 'Circle' and then release 'Triangle'
01 00 10 00 5C FF FF FF FF FF 01 05
01 00 00 00 FF FF FF FF FF FF 00 05
So using the third byte (actually second, third and fourth right?) this
combination of multiple key presses can be detected, that happens to be
true for the "joypad buttons" which makes sense.
We can express the decoding of a bitfield in terms of HID descriptor,
right? Maybe copying from the Sixaxis report descriptor as the raw
report data for the first four bytes looks the same as the Sixaxis.
I'll try modifying the descriptor later.
David D. if you want you could send the version with the raw_event
callback first and get that merged and we can improve the descriptor
later, that would be fine to me.
BTW Some three keys combinations also produce a 03 in the one to last
byte: 01 00 00 00 FF FF FF FF FF FF 03 05
combinations like "Play+Stop+Next" do but some other do not and I could
not find a rule about that, so I don't know what the 03 really means.
> It looks like this simple approach isn't going to work when you press
> multiple keys, so I'll need more information to see if I can do
> something else -- my Harmony can only do one key press at a time, as it
> is converting IR to an emulated BD remote.
>
> > > +config HID_PS3REMOTE
> > > + tristate "Sony PS3 BD Remote"
> >
> > If you are going for a v3, consider using "Sony PS3 BD Remote Control"
> > here too, not a big deal but that's the name on the user manual.
>
> Will do, thanks.
>
> > For the note about the association procedure I had in mind something
> > like this:
> >
> > /* NOTE: in order to associate the Sony PS3 BD Remote with a Bluetooth host
> > * the key combination Start+Enter has to be kept pressed for about 7 seconds,
> > * with the host BT Controller in discovering mode.
> > *
> > * Also the pin request should be ignored by the BT Controller (NULL pin).
> > */
> >
> > Could someone more into BT please check the terminology here? Thanks.
>
> Will add something along these lines, though I think you mean there is
> no authentication step rather than a NULL pin, which implies we still
> need to do auth. Or maybe that's just how the Harmony needed it...
>
>From a user point of view there is still some "set up" happening,
the gnome bluetooth-applet tells "Successfully set up new device '%
s'", so maybe we can just call this "set up" in the comment above too, I
mentioned the PIN because Gnome bluetooth does something about that[1],
Bastien in gnome-bt case pin="NULL" means that there will be no
pin request at all by the device, right?
Thanks,
Antonio
[1]
http://git.gnome.org/browse/gnome-bluetooth/tree/wizard/pin-code-database.xml#n59
--
Antonio Ospite
http://ao2.it
A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
