Shawn Guo wrote:
On Wed, Aug 15, 2012 at 06:31:47PM +0800, Hui Wang wrote:
The egalax_ts driver needs to get the gpio number of the irq pin,
and use this gpio to wake up the controller. So add a note
for this change.
Signed-off-by: Hui Wang <jason77.wang@xxxxxxxxx>
---
.../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000..df70318
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
Since we define this in the binding anyway, can we have an corresponding
.of_match_table in the driver?
Regards,
Shawn
OK, will add it in the driver.
Regards,
Hui.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
