V2: Add return value checking for waking up the controller in the probe function. V1: eeti touch screen controller is an external chip for most platforms, it connect to CPU via i2c bus, and it has a irq request pin need to be connected to a gpio of the CPU, this irq request pin also act as a wake up signal for touch screen controller, we need to get this gpio number and operate it to wake up the controller, the old way to get gpio is irq_to_gpio(), this API is dying and most platforms don't support it, we change it to a more generic way to use devcietree. Hui Wang (2): Input: egalax_ts: get gpio from devicetree node Input: add devicetree binding note for egalax_ts .../bindings/input/touchscreen/egalax-ts.txt | 17 +++++++++++++++++ drivers/input/touchscreen/egalax_ts.c | 19 ++++++++++++++++--- 2 files changed, 33 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt -- 1.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
