The egalax_ts driver needs to get the gpio number of the irq pin,
and use this gpio to wake up the controller. So add a note
for this change.
Signed-off-by: Hui Wang <jason77.wang@xxxxxxxxx>
---
.../bindings/input/touchscreen/egalax-ts.txt | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000..5dd8213
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,17 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+- irq-gpio : the gpio pin to be used for irq
+
+Example:
+
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 2>;
+ irq-gpio = <&gpio1 9 0>;
+ };
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
