Hi Anirudh,
On Tue, Feb 01, 2011 at 07:17:43PM +0530, Anirudh Ghayal wrote:
> +
> +#include <linux/mfd/pmic8058.h>
> +#include <linux/input/pmic8058-vibrator.h>
Where is this header file? Shouldn't it be part of this patch?
> +
> +#define VIB_DRV 0x4A
> +
> +#define VIB_DRV_SEL_MASK 0xf8
> +#define VIB_DRV_SEL_SHIFT 0x03
> +#define VIB_DRV_EN_MANUAL_MASK 0xfc
> +
> +#define VIB_MAX_LEVEL_mV (3100)
> +#define VIB_MIN_LEVEL_mV (1200)
> +#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
> +
> +#define MAX_FF_SPEED 0xff
> +
> +/*
> + * struct pmic8058_vib - structure to hold vibrator data
> + * vib_input_dev: input device supporting force feedback
> + * work: work structure to set the vibration parameters
> + * dev: device supporting force feedback
> + * pdata: platform data
> + * pm_chip: reference to pmic chip to carry out read/write operations
> + * speed: speed of vibration set from userland
> + * state: state of vibrator
> + * level: level of vibration to set in the chip
> + * reg_vib_drv: VIB_DRV register value
Hmm, this is kind of kerneldoc but not quite (kerneldoc's arguments
start with '@').
> + *
> + */
> +struct pmic8058_vib {
> + struct input_dev *vib_input_dev;
> + struct work_struct work;
> + struct device *dev;
> + const struct pmic8058_vibrator_pdata *pdata;
> + struct pm8058_chip *pm_chip;
> + int speed;
> + int state;
> + int level;
> + u8 reg_vib_drv;
> +};
> +
> +/*
> + * pmic8058_vib_read_u8 - helper to read a byte from pmic chip
> + * vib: pointer to vibrator structure
> + * data: placeholder for data to be read
> + * reg: register address
> + *
> + */
> +static int pmic8058_vib_read_u8(struct pmic8058_vib *vib,
> + u8 *data, u16 reg)
> +{
> + int rc;
> +
> + rc = pm8058_read(vib->pm_chip, reg, data, 1);
> + if (rc < 0)
> + dev_warn(vib->dev, "Error reading pmic8058 reg 0x%x(0x%x)\n",
> + reg, rc);
> + return rc;
> +}
> +
> +/*
> + * pmic8058_vib_write_u8 - helper to write a byte to pmic chip
> + * vib: pointer to vibrator structure
> + * data: data to write
> + * reg: register address
> + *
> + */
> +static int pmic8058_vib_write_u8(struct pmic8058_vib *vib,
> + u8 data, u16 reg)
> +{
> + int rc;
> +
> + rc = pm8058_write(vib->pm_chip, reg, &data, 1);
> + if (rc < 0)
> + dev_warn(vib->dev, "Error writing pmic8058 reg 0x%x(0x%x)\n",
> + reg, rc);
> + return rc;
> +}
> +
> +/*
> + * pmic8058_vib_set - handler to start/stop vibration
> + * vib: pointer to vibrator structure
> + * on: state to set
> + *
> + */
> +static int pmic8058_vib_set(struct pmic8058_vib *vib, int on)
> +{
> + int rc;
> + u8 val;
> +
> + val = vib->reg_vib_drv;
> +
> + if (on)
> + val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
> + else
> + val &= ~VIB_DRV_SEL_MASK;
> +
> + rc = pmic8058_vib_write_u8(vib, val, VIB_DRV);
> + if (rc < 0)
> + return rc;
> +
> + vib->reg_vib_drv = val;
> + return rc;
> +}
> +
> +/*
> + * pmic8058_work_handler - worker to set vibration level
> + * work: pointer to work_struct
> + *
> + */
> +static void pmic8058_work_handler(struct work_struct *work)
> +{
> + struct pmic8058_vib *vib;
> + int rc;
> + u8 val;
> +
> + vib = container_of(work, struct pmic8058_vib, work);
> +
> + rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV);
> + if (rc < 0)
> + return;
> +
> + /*
> + * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
> + * scale the level to fit into these ranges.
> + */
> + if (vib->speed) {
> + vib->state = 1;
> + vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
> + VIB_MIN_LEVEL_mV;
> + vib->level /= 100;
> + } else {
> + vib->state = 0;
> + vib->level = VIB_MIN_LEVEL_mV / 100;
> + }
> + pmic8058_vib_set(vib, vib->state);
> +}
> +
> +/*
> + * pmic8058_vib_play_effect - function to handle vib effects.
> + * dev: input device pointer
> + * data: data of effect
> + * effect: effect to play
> + *
> + * Currently this driver supports only rumble effects.
> + *
> + */
> +static int pmic8058_vib_play_effect(struct input_dev *dev, void *data,
> + struct ff_effect *effect)
> +{
> + struct pmic8058_vib *vib = input_get_drvdata(dev);
> +
> + vib->speed = effect->u.rumble.strong_magnitude >> 8;
> + if (!vib->speed)
> + vib->speed = effect->u.rumble.weak_magnitude >> 9;
> + schedule_work(&vib->work);
> + return 0;
> +}
> +
> +static int __devinit pmic8058_vib_probe(struct platform_device *pdev)
> +
> +{
> + struct pm8058_chip *pm_chip;
> + struct pmic8058_vib *vib;
> + const struct pmic8058_vibrator_pdata *pdata = pdev->dev.platform_data;
> + int rc;
> + u8 val;
> +
> + pm_chip = platform_get_drvdata(pdev);
The parent should not abuse platform data of _this_ device, it belongs
to this driver. In fact you overwrite it with pmic8058_vib below, which
means that you can't unbind the driver and bind it again.
Please find other way to pass pm_chip.
> + if (pm_chip == NULL) {
> + dev_err(&pdev->dev, "no parent data passed in\n");
> + return -EINVAL;
> + }
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata->level_mV < VIB_MIN_LEVEL_mV ||
> + pdata->level_mV > VIB_MAX_LEVEL_mV)
> + return -EINVAL;
> +
> + vib = kzalloc(sizeof(*vib), GFP_KERNEL);
> + if (!vib)
> + return -ENOMEM;
> +
> + vib->pm_chip = pm_chip;
> + vib->pdata = pdata;
> + vib->dev = &pdev->dev;
> +
> + INIT_WORK(&vib->work, pmic8058_work_handler);
> +
> + vib->vib_input_dev = input_allocate_device();
> +
> + if (vib->vib_input_dev == NULL) {
> + dev_err(&pdev->dev, "couldn't allocate input device\n");
> + rc = -ENOMEM;
> + goto err_alloc_dev;
> + }
> +
> + input_set_drvdata(vib->vib_input_dev, vib);
> +
> + vib->vib_input_dev->name = "pmic8058_vibrator";
> + vib->vib_input_dev->id.version = 1;
> + vib->vib_input_dev->dev.parent = &pdev->dev;
> +
> + /* operate in manual mode */
> + rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV);
> + if (rc < 0)
> + goto err_read_vib;
> + val &= ~VIB_DRV_EN_MANUAL_MASK;
> + rc = pmic8058_vib_write_u8(vib, val, VIB_DRV);
> + if (rc < 0)
> + goto err_read_vib;
> +
> + vib->reg_vib_drv = val;
> +
> + input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
> +
> + rc = input_ff_create_memless(vib->vib_input_dev, NULL,
> + pmic8058_vib_play_effect);
> + if (rc < 0) {
> + dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
> + goto err_create_memless;
> + }
> +
> + platform_set_drvdata(pdev, vib);
> +
> + rc = input_register_device(vib->vib_input_dev);
> + if (rc < 0) {
> + dev_dbg(&pdev->dev, "couldn't register input device\n");
> + goto err_reg_input_dev;
> + }
platform_set_drvdata(pdev, vib) should go here so you do not need to
clean it if input_register_device() fails.
> + return 0;
> +
> +err_reg_input_dev:
> + input_ff_destroy(vib->vib_input_dev);
> +err_create_memless:
> +err_read_vib:
> + input_free_device(vib->vib_input_dev);
> +err_alloc_dev:
> + kfree(vib);
> + return rc;
> +}
> +
> +static int __devexit pmic8058_vib_remove(struct platform_device *pdev)
> +{
> + struct pmic8058_vib *vib = platform_get_drvdata(pdev);
> +
> + cancel_work_sync(&vib->work);
> + if (vib->state)
> + pmic8058_vib_set(vib, 0);
This should probably be part of pmic8058_vib_close() method.
> +
> + input_unregister_device(vib->vib_input_dev);
> + kfree(vib);
Need to call platform_set_drvdata(pdev, NULL);
> + return 0;
> +}
> +
> +static struct platform_driver pmic8058_vib_driver = {
> + .probe = pmic8058_vib_probe,
> + .remove = __devexit_p(pmic8058_vib_remove),
> + .driver = {
> + .name = "pm8058-vib",
> + .owner = THIS_MODULE,
> + },
> +};
What about PM? Do you need to shut off vibration if device goes to sleep?
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
