From: Amy Maloche <amaloche@xxxxxxxxxxxxxx>
Add support for pmic8058 based vibrator to facilitate haptics.
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Mohan Pallaka <mpallaka@xxxxxxxxxxxxxx>
---
drivers/input/misc/Kconfig | 12 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/pmic8058-vibrator.c | 306 ++++++++++++++++++++++++++++++++
3 files changed, 319 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/pmic8058-vibrator.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3802f54..e391f9e 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -74,6 +74,18 @@ config INPUT_PCSPKR
To compile this driver as a module, choose M here: the
module will be called pcspkr.
+config INPUT_PMIC8058_VIBRATOR
+ tristate "Qualcomm PM8058 vibrator support"
+ depends on PMIC8058
+ select INPUT_FF_MEMLESS
+ help
+ This option enables device driver support for the vibrator
+ on Qualcomm PM8058 chip. This driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called pmic8058-vibrator.
+
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
depends on PCI && SPARC64
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index df9a679..b5fa9f6 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_PMIC8058_OTHC) += pmic8058-othc.o
+obj-$(CONFIG_INPUT_PMIC8058_VIBRATOR) += pmic8058-vibrator.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_PMIC8058_PWRKEY) += pmic8058-pwrkey.o
diff --git a/drivers/input/misc/pmic8058-vibrator.c b/drivers/input/misc/pmic8058-vibrator.c
new file mode 100644
index 0000000..cb1a797
--- /dev/null
+++ b/drivers/input/misc/pmic8058-vibrator.c
@@ -0,0 +1,306 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/pmic8058.h>
+#include <linux/input/pmic8058-vibrator.h>
+
+#define VIB_DRV 0x4A
+
+#define VIB_DRV_SEL_MASK 0xf8
+#define VIB_DRV_SEL_SHIFT 0x03
+#define VIB_DRV_EN_MANUAL_MASK 0xfc
+
+#define VIB_MAX_LEVEL_mV (3100)
+#define VIB_MIN_LEVEL_mV (1200)
+#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
+
+#define MAX_FF_SPEED 0xff
+
+/*
+ * struct pmic8058_vib - structure to hold vibrator data
+ * vib_input_dev: input device supporting force feedback
+ * work: work structure to set the vibration parameters
+ * dev: device supporting force feedback
+ * pdata: platform data
+ * pm_chip: reference to pmic chip to carry out read/write operations
+ * speed: speed of vibration set from userland
+ * state: state of vibrator
+ * level: level of vibration to set in the chip
+ * reg_vib_drv: VIB_DRV register value
+ *
+ */
+struct pmic8058_vib {
+ struct input_dev *vib_input_dev;
+ struct work_struct work;
+ struct device *dev;
+ const struct pmic8058_vibrator_pdata *pdata;
+ struct pm8058_chip *pm_chip;
+ int speed;
+ int state;
+ int level;
+ u8 reg_vib_drv;
+};
+
+/*
+ * pmic8058_vib_read_u8 - helper to read a byte from pmic chip
+ * vib: pointer to vibrator structure
+ * data: placeholder for data to be read
+ * reg: register address
+ *
+ */
+static int pmic8058_vib_read_u8(struct pmic8058_vib *vib,
+ u8 *data, u16 reg)
+{
+ int rc;
+
+ rc = pm8058_read(vib->pm_chip, reg, data, 1);
+ if (rc < 0)
+ dev_warn(vib->dev, "Error reading pmic8058 reg 0x%x(0x%x)\n",
+ reg, rc);
+ return rc;
+}
+
+/*
+ * pmic8058_vib_write_u8 - helper to write a byte to pmic chip
+ * vib: pointer to vibrator structure
+ * data: data to write
+ * reg: register address
+ *
+ */
+static int pmic8058_vib_write_u8(struct pmic8058_vib *vib,
+ u8 data, u16 reg)
+{
+ int rc;
+
+ rc = pm8058_write(vib->pm_chip, reg, &data, 1);
+ if (rc < 0)
+ dev_warn(vib->dev, "Error writing pmic8058 reg 0x%x(0x%x)\n",
+ reg, rc);
+ return rc;
+}
+
+/*
+ * pmic8058_vib_set - handler to start/stop vibration
+ * vib: pointer to vibrator structure
+ * on: state to set
+ *
+ */
+static int pmic8058_vib_set(struct pmic8058_vib *vib, int on)
+{
+ int rc;
+ u8 val;
+
+ val = vib->reg_vib_drv;
+
+ if (on)
+ val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
+ else
+ val &= ~VIB_DRV_SEL_MASK;
+
+ rc = pmic8058_vib_write_u8(vib, val, VIB_DRV);
+ if (rc < 0)
+ return rc;
+
+ vib->reg_vib_drv = val;
+ return rc;
+}
+
+/*
+ * pmic8058_work_handler - worker to set vibration level
+ * work: pointer to work_struct
+ *
+ */
+static void pmic8058_work_handler(struct work_struct *work)
+{
+ struct pmic8058_vib *vib;
+ int rc;
+ u8 val;
+
+ vib = container_of(work, struct pmic8058_vib, work);
+
+ rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV);
+ if (rc < 0)
+ return;
+
+ /*
+ * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
+ * scale the level to fit into these ranges.
+ */
+ if (vib->speed) {
+ vib->state = 1;
+ vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
+ VIB_MIN_LEVEL_mV;
+ vib->level /= 100;
+ } else {
+ vib->state = 0;
+ vib->level = VIB_MIN_LEVEL_mV / 100;
+ }
+ pmic8058_vib_set(vib, vib->state);
+}
+
+/*
+ * pmic8058_vib_play_effect - function to handle vib effects.
+ * dev: input device pointer
+ * data: data of effect
+ * effect: effect to play
+ *
+ * Currently this driver supports only rumble effects.
+ *
+ */
+static int pmic8058_vib_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct pmic8058_vib *vib = input_get_drvdata(dev);
+
+ vib->speed = effect->u.rumble.strong_magnitude >> 8;
+ if (!vib->speed)
+ vib->speed = effect->u.rumble.weak_magnitude >> 9;
+ schedule_work(&vib->work);
+ return 0;
+}
+
+static int __devinit pmic8058_vib_probe(struct platform_device *pdev)
+
+{
+ struct pm8058_chip *pm_chip;
+ struct pmic8058_vib *vib;
+ const struct pmic8058_vibrator_pdata *pdata = pdev->dev.platform_data;
+ int rc;
+ u8 val;
+
+ pm_chip = platform_get_drvdata(pdev);
+ if (pm_chip == NULL) {
+ dev_err(&pdev->dev, "no parent data passed in\n");
+ return -EINVAL;
+ }
+
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->level_mV < VIB_MIN_LEVEL_mV ||
+ pdata->level_mV > VIB_MAX_LEVEL_mV)
+ return -EINVAL;
+
+ vib = kzalloc(sizeof(*vib), GFP_KERNEL);
+ if (!vib)
+ return -ENOMEM;
+
+ vib->pm_chip = pm_chip;
+ vib->pdata = pdata;
+ vib->dev = &pdev->dev;
+
+ INIT_WORK(&vib->work, pmic8058_work_handler);
+
+ vib->vib_input_dev = input_allocate_device();
+
+ if (vib->vib_input_dev == NULL) {
+ dev_err(&pdev->dev, "couldn't allocate input device\n");
+ rc = -ENOMEM;
+ goto err_alloc_dev;
+ }
+
+ input_set_drvdata(vib->vib_input_dev, vib);
+
+ vib->vib_input_dev->name = "pmic8058_vibrator";
+ vib->vib_input_dev->id.version = 1;
+ vib->vib_input_dev->dev.parent = &pdev->dev;
+
+ /* operate in manual mode */
+ rc = pmic8058_vib_read_u8(vib, &val, VIB_DRV);
+ if (rc < 0)
+ goto err_read_vib;
+ val &= ~VIB_DRV_EN_MANUAL_MASK;
+ rc = pmic8058_vib_write_u8(vib, val, VIB_DRV);
+ if (rc < 0)
+ goto err_read_vib;
+
+ vib->reg_vib_drv = val;
+
+ input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
+
+ rc = input_ff_create_memless(vib->vib_input_dev, NULL,
+ pmic8058_vib_play_effect);
+ if (rc < 0) {
+ dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
+ goto err_create_memless;
+ }
+
+ platform_set_drvdata(pdev, vib);
+
+ rc = input_register_device(vib->vib_input_dev);
+ if (rc < 0) {
+ dev_dbg(&pdev->dev, "couldn't register input device\n");
+ goto err_reg_input_dev;
+ }
+ return 0;
+
+err_reg_input_dev:
+ input_ff_destroy(vib->vib_input_dev);
+err_create_memless:
+err_read_vib:
+ input_free_device(vib->vib_input_dev);
+err_alloc_dev:
+ kfree(vib);
+ return rc;
+}
+
+static int __devexit pmic8058_vib_remove(struct platform_device *pdev)
+{
+ struct pmic8058_vib *vib = platform_get_drvdata(pdev);
+
+ cancel_work_sync(&vib->work);
+ if (vib->state)
+ pmic8058_vib_set(vib, 0);
+
+ input_unregister_device(vib->vib_input_dev);
+ kfree(vib);
+ return 0;
+}
+
+static struct platform_driver pmic8058_vib_driver = {
+ .probe = pmic8058_vib_probe,
+ .remove = __devexit_p(pmic8058_vib_remove),
+ .driver = {
+ .name = "pm8058-vib",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pmic8058_vib_init(void)
+{
+ return platform_driver_register(&pmic8058_vib_driver);
+}
+module_init(pmic8058_vib_init);
+
+static void __exit pmic8058_vib_exit(void)
+{
+ platform_driver_unregister(&pmic8058_vib_driver);
+}
+module_exit(pmic8058_vib_exit);
+
+MODULE_ALIAS("platform:pmic8058_vib");
+MODULE_DESCRIPTION("PMIC8058 vibrator driver based on ff-memless framework");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Amy Maloche <amaloche@xxxxxxxxxxxxxx>");
--
1.7.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
