Fixup #define dbginfo
Remove #define err, use pr_err
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/input/misc/ati_remote.c | 22 ++++++++++++----------
drivers/input/misc/ati_remote2.c | 6 ++++--
drivers/input/misc/cm109.c | 23 +++++++++--------------
drivers/input/misc/hp_sdc_rtc.c | 10 ++++++----
drivers/input/misc/m68kspkr.c | 4 +++-
drivers/input/misc/powermate.c | 19 +++++++++++--------
drivers/input/misc/uinput.c | 25 ++++++++++++++-----------
drivers/input/misc/winbond-cir.c | 6 ++++--
drivers/input/misc/wistron_btns.c | 29 +++++++++++++++--------------
drivers/input/misc/yealink.c | 5 +++--
10 files changed, 81 insertions(+), 68 deletions(-)
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index bce5712..c705ac0 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -85,6 +85,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -139,9 +141,11 @@ static int repeat_delay = REPEAT_DELAY;
module_param(repeat_delay, int, 0644);
MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
-#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
-#undef err
-#define err(format, arg...) printk(KERN_ERR format , ## arg)
+#define dbginfo(dev, format, arg...) \
+do { \
+ if (debug) \
+ dev_info(dev, format, ##arg); \
+} while (0)
static struct usb_device_id ati_remote_table[] = {
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
@@ -738,7 +742,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
int err = -ENOMEM;
if (iface_host->desc.bNumEndpoints != 2) {
- err("%s: Unexpected desc.bNumEndpoints\n", __func__);
+ pr_err("%s: Unexpected desc.bNumEndpoints\n", __func__);
return -ENODEV;
}
@@ -746,11 +750,11 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
endpoint_out = &iface_host->endpoint[1].desc;
if (!usb_endpoint_is_int_in(endpoint_in)) {
- err("%s: Unexpected endpoint_in\n", __func__);
+ pr_err("%s: Unexpected endpoint_in\n", __func__);
return -ENODEV;
}
if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
- err("%s: endpoint_in message size==0? \n", __func__);
+ pr_err("%s: endpoint_in message size==0?\n", __func__);
return -ENODEV;
}
@@ -838,11 +842,9 @@ static int __init ati_remote_init(void)
result = usb_register(&ati_remote_driver);
if (result)
- printk(KERN_ERR KBUILD_MODNAME
- ": usb_register error #%d\n", result);
+ pr_err("usb_register error #%d\n", result);
else
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
+ pr_info(DRIVER_VERSION ":" DRIVER_DESC "\n");
return result;
}
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 2325765..7b75f96 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -9,6 +9,8 @@
* as published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/usb/input.h>
#include <linux/slab.h>
@@ -975,9 +977,9 @@ static int __init ati_remote2_init(void)
r = usb_register(&ati_remote2_driver);
if (r)
- printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
+ pr_err("usb_register() = %d\n", r);
else
- printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
+ pr_info(DRIVER_DESC " " DRIVER_VERSION "\n");
return r;
}
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 2b0eba6..9ae40cb 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -28,6 +28,8 @@
* - Read/write EEPROM
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -518,8 +520,7 @@ static int cm109_input_open(struct input_dev *idev)
error = usb_autopm_get_interface(dev->intf);
if (error < 0) {
- err("%s - cannot autoresume, result %d",
- __func__, error);
+ err("%s: cannot autoresume, result %d", __func__, error);
return error;
}
@@ -855,23 +856,18 @@ static int __init cm109_select_keymap(void)
/* Load the phone keymap */
if (!strcasecmp(phone, "kip1000")) {
keymap = keymap_kip1000;
- printk(KERN_INFO KBUILD_MODNAME ": "
- "Keymap for Komunikate KIP1000 phone loaded\n");
+ pr_info("Keymap for Komunikate KIP1000 phone loaded\n");
} else if (!strcasecmp(phone, "gtalk")) {
keymap = keymap_gtalk;
- printk(KERN_INFO KBUILD_MODNAME ": "
- "Keymap for Genius G-talk phone loaded\n");
+ pr_info("Keymap for Genius G-talk phone loaded\n");
} else if (!strcasecmp(phone, "usbph01")) {
keymap = keymap_usbph01;
- printk(KERN_INFO KBUILD_MODNAME ": "
- "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ pr_info("Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
} else if (!strcasecmp(phone, "atcom")) {
keymap = keymap_atcom;
- printk(KERN_INFO KBUILD_MODNAME ": "
- "Keymap for ATCom AU-100 phone loaded\n");
+ pr_info("Keymap for ATCom AU-100 phone loaded\n");
} else {
- printk(KERN_ERR KBUILD_MODNAME ": "
- "Unsupported phone: %s\n", phone);
+ pr_err("Unsupported phone: %s\n", phone);
return -EINVAL;
}
@@ -890,8 +886,7 @@ static int __init cm109_init(void)
if (err)
return err;
- printk(KERN_INFO KBUILD_MODNAME ": "
- DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
+ pr_info(DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
return 0;
}
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index c190664..209a1af 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -33,6 +33,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/hp_sdc.h>
#include <linux/errno.h>
#include <linux/types.h>
@@ -703,13 +705,13 @@ static int __init hp_sdc_rtc_init(void)
if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr)))
return ret;
if (misc_register(&hp_sdc_rtc_dev) != 0)
- printk(KERN_INFO "Could not register misc. dev for i8042 rtc\n");
+ pr_info("Could not register misc. dev for i8042 rtc\n");
create_proc_read_entry ("driver/rtc", 0, NULL,
hp_sdc_rtc_read_proc, NULL);
- printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded "
- "(RTC v " RTC_VERSION ")\n");
+ pr_info("HP i8042 SDC + MSM-58321 RTC support loaded "
+ "(RTC v " RTC_VERSION ")\n");
return 0;
}
@@ -719,7 +721,7 @@ static void __exit hp_sdc_rtc_exit(void)
remove_proc_entry ("driver/rtc", NULL);
misc_deregister(&hp_sdc_rtc_dev);
hp_sdc_release_timer_irq(hp_sdc_rtc_isr);
- printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n");
+ pr_info("HP i8042 SDC + MSM-58321 RTC support unloaded\n");
}
module_init(hp_sdc_rtc_init);
diff --git a/drivers/input/misc/m68kspkr.c b/drivers/input/misc/m68kspkr.c
index 0c64d9b..13c1bc8 100644
--- a/drivers/input/misc/m68kspkr.c
+++ b/drivers/input/misc/m68kspkr.c
@@ -13,6 +13,8 @@
* the Free Software Foundation
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -113,7 +115,7 @@ static int __init m68kspkr_init(void)
int err;
if (!mach_beep) {
- printk(KERN_INFO "m68kspkr: no lowlevel beep support\n");
+ pr_info("no lowlevel beep support\n");
return -ENODEV;
}
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index bf170f6..8c3777c 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -28,6 +28,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -167,12 +169,12 @@ static void powermate_sync_state(struct powermate_device *pm)
pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
} else {
- printk(KERN_ERR "powermate: unknown update required");
+ pr_err("unknown update required\n");
pm->requires_update = 0; /* fudge the bug */
return;
}
-/* printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */
+/* pr_info("%04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */
pm->configcr->bRequestType = 0x41; /* vendor request */
pm->configcr->bRequest = 0x01;
@@ -183,7 +185,7 @@ static void powermate_sync_state(struct powermate_device *pm)
powermate_config_complete, pm);
if (usb_submit_urb(pm->config, GFP_ATOMIC))
- printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
+ pr_err("usb_submit_urb(config) failed\n");
}
/* Called when our asynchronous control message completes. We may need to issue another immediately */
@@ -193,7 +195,7 @@ static void powermate_config_complete(struct urb *urb)
unsigned long flags;
if (urb->status)
- printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
+ pr_err("config urb returned %d\n", urb->status);
spin_lock_irqsave(&pm->lock, flags);
powermate_sync_state(pm);
@@ -346,8 +348,8 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
break;
default:
input_dev->name = pm_name_soundknob;
- printk(KERN_WARNING "powermate: unknown product id %04x\n",
- le16_to_cpu(udev->descriptor.idProduct));
+ pr_warning("unknown product id %04x\n",
+ le16_to_cpu(udev->descriptor.idProduct));
}
input_dev->phys = pm->phys;
@@ -369,8 +371,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
- printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
- POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
+ pr_warning("Expected payload of %d--%d bytes, found %d bytes!\n",
+ POWERMATE_PAYLOAD_SIZE_MIN,
+ POWERMATE_PAYLOAD_SIZE_MAX, maxp);
maxp = POWERMATE_PAYLOAD_SIZE_MAX;
}
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index bb53fd33..92b56da 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -29,6 +29,9 @@
* 0.1 20/06/2002
* - first public version
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -246,7 +249,7 @@ static int uinput_create_device(struct uinput_device *udev)
int error;
if (udev->state != UIST_SETUP_COMPLETE) {
- printk(KERN_DEBUG "%s: write device info first\n", UINPUT_NAME);
+ printk(KERN_DEBUG pr_fmt("write device info first\n"));
return -EINVAL;
}
@@ -306,10 +309,10 @@ static int uinput_validate_absbits(struct input_dev *dev)
if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
- "%s: invalid abs[%02x] min:%d max:%d\n",
- UINPUT_NAME, cnt,
- input_abs_get_min(dev, cnt),
- input_abs_get_max(dev, cnt));
+ pr_fmt("invalid abs[%02x] min:%d max:%d\n"),
+ cnt,
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
@@ -317,12 +320,12 @@ static int uinput_validate_absbits(struct input_dev *dev)
if (input_abs_get_flat(dev, cnt) >
input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
- "%s: abs_flat #%02x out of range: %d "
- "(min:%d/max:%d)\n",
- UINPUT_NAME, cnt,
- input_abs_get_flat(dev, cnt),
- input_abs_get_min(dev, cnt),
- input_abs_get_max(dev, cnt));
+ pr_fmt("abs_flat #%02x out of range: %d "
+ "(min:%d/max:%d)\n"),
+ cnt,
+ input_abs_get_flat(dev, cnt),
+ input_abs_get_min(dev, cnt),
+ input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index 64f1de7..5cc6607 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -44,6 +44,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/pnp.h>
#include <linux/interrupt.h>
@@ -1581,13 +1583,13 @@ wbcir_init(void)
case IR_PROTOCOL_RC6:
break;
default:
- printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
+ pr_err("Invalid protocol argument\n");
return -EINVAL;
}
ret = pnp_register_driver(&wbcir_driver);
if (ret)
- printk(KERN_ERR DRVNAME ": Unable to register driver\n");
+ pr_err("Unable to register driver\n");
return ret;
}
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 12501de..8aff2fe 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -17,6 +17,9 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place Suite 330, Boston, MA 02111-1307, USA.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/io.h>
#include <linux/dmi.h>
#include <linux/init.h>
@@ -111,15 +114,15 @@ static int __init map_bios(void)
base = ioremap(0xF0000, 0x10000); /* Can't fail */
offset = locate_wistron_bios(base);
if (offset < 0) {
- printk(KERN_ERR "wistron_btns: BIOS entry point not found\n");
+ pr_err("BIOS entry point not found\n");
iounmap(base);
return -ENODEV;
}
entry_point = readl(base + offset + 5);
printk(KERN_DEBUG
- "wistron_btns: BIOS signature found at %p, entry point %08X\n",
- base + offset, entry_point);
+ pr_fmt("BIOS signature found at %p, entry point %08X\n"),
+ base + offset, entry_point);
if (entry_point >= 0xF0000) {
bios_code_map_base = base;
@@ -128,9 +131,8 @@ static int __init map_bios(void)
iounmap(base);
bios_code_map_base = ioremap(entry_point & ~0x3FFF, 0x4000);
if (bios_code_map_base == NULL) {
- printk(KERN_ERR
- "wistron_btns: Can't map BIOS code at %08X\n",
- entry_point & ~0x3FFF);
+ pr_err("Can't map BIOS code at %08X\n",
+ entry_point & ~0x3FFF);
goto err;
}
bios_entry_point = bios_code_map_base + (entry_point & 0x3FFF);
@@ -138,7 +140,7 @@ static int __init map_bios(void)
/* The Windows driver maps 0x10000 bytes, we keep only one page... */
bios_data_map_base = ioremap(0x400, 0xc00);
if (bios_data_map_base == NULL) {
- printk(KERN_ERR "wistron_btns: Can't map BIOS data\n");
+ pr_err("Can't map BIOS data\n");
goto err_code;
}
return 0;
@@ -1006,13 +1008,13 @@ static int __init select_keymap(void)
else if (strcmp (keymap_name, "generic") == 0)
keymap = keymap_wistron_generic;
else {
- printk(KERN_ERR "wistron_btns: Keymap unknown\n");
+ pr_err("Keymap unknown\n");
return -EINVAL;
}
}
if (keymap == NULL) {
if (!force) {
- printk(KERN_ERR "wistron_btns: System unknown\n");
+ pr_err("System unknown\n");
return -ENODEV;
}
keymap = keymap_empty;
@@ -1132,8 +1134,7 @@ static void handle_key(u8 code)
}
jiffies_last_press = jiffies;
} else
- printk(KERN_NOTICE
- "wistron_btns: Unknown key code %02X\n", code);
+ pr_notice("Unknown key code %02X\n", code);
}
static void poll_bios(bool discard)
@@ -1190,9 +1191,9 @@ static int __devinit wistron_setup_keymap(struct input_dev *dev,
case KE_END:
if (entry->code & FE_UNTESTED)
- printk(KERN_WARNING "Untested laptop multimedia keys, "
- "please report success or failure to "
- "eric.piel@xxxxxxxxxxxxxxxx\n");
+ pr_warning("Untested laptop multimedia keys, "
+ "please report success or failure to "
+ "eric.piel@xxxxxxxxxxxxxxxx\n");
break;
}
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 41201c6..39af7c0 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -46,6 +46,8 @@
* 20050816 henk Merge 2.6.13-rc6
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -992,8 +994,7 @@ static int __init yealink_dev_init(void)
{
int ret = usb_register(&yealink_driver);
if (ret == 0)
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
+ pr_info(DRIVER_VERSION ":" DRIVER_DESC "\n");
return ret;
}
--
1.7.2.19.g9a302
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
