ps2 related drivers use #define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
all others use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Add argument checking to dbg macro
Convert bare printks to pr_cont
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/input/mouse/alps.c | 12 ++++---
drivers/input/mouse/appletouch.c | 64 +++++++++++++++++------------------
drivers/input/mouse/bcm5974.c | 48 +++++++++++++--------------
drivers/input/mouse/elantech.c | 4 +-
drivers/input/mouse/inport.c | 8 +++--
drivers/input/mouse/lifebook.c | 5 ++-
drivers/input/mouse/logibm.c | 10 +++--
drivers/input/mouse/logips2pp.c | 13 ++++---
drivers/input/mouse/pc110pad.c | 10 +++--
drivers/input/mouse/psmouse-base.c | 52 +++++++++++++++--------------
drivers/input/mouse/rpcmouse.c | 4 ++-
drivers/input/mouse/sentelic.c | 13 ++++---
drivers/input/mouse/sermouse.c | 6 ++-
drivers/input/mouse/synaptics.c | 30 +++++++++--------
drivers/input/mouse/trackpoint.c | 10 +++---
drivers/input/mouse/vsxxxaa.c | 44 ++++++++++++-------------
16 files changed, 174 insertions(+), 159 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 99d5876..bc2bde3 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -15,6 +15,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
@@ -25,9 +27,9 @@
#undef DEBUG
#ifdef DEBUG
-#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg)
+#define dbg(format, arg...) pr_info(format "\n", ##arg)
#else
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...) do { if (0) pr_info(format "\n", ##arg); } while (0)
#endif
#define ALPS_OLDPROTO 0x01 /* old style input */
@@ -605,12 +607,12 @@ static int alps_hw_init(struct psmouse *psmouse)
}
if (alps_tap_mode(psmouse, true)) {
- printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
+ pr_warning("Failed to enable hardware tapping\n");
return -1;
}
if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
+ pr_err("Failed to enable absolute mode\n");
return -1;
}
@@ -621,7 +623,7 @@ static int alps_hw_init(struct psmouse *psmouse)
/* ALPS needs stream mode, otherwise it won't report any data */
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
- printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+ pr_err("Failed to enable stream mode\n");
return -1;
}
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 05edd75..740cb8c 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -28,6 +28,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -212,20 +214,22 @@ struct atp {
struct work_struct work;
};
-#define dbg_dump(msg, tab) \
+#define dbg_dump(msg, tab) \
+do { \
if (debug > 1) { \
int __i; \
- printk(KERN_DEBUG "appletouch: %s", msg); \
+ printk(KERN_DEBUG pr_fmt("%s"), msg); \
for (__i = 0; __i < ATP_XSENSORS + ATP_YSENSORS; __i++) \
- printk(" %02x", tab[__i]); \
- printk("\n"); \
- }
+ pr_cont(" %02x", tab[__i]); \
+ pr_cont("\n"); \
+ } \
+} while (0)
-#define dprintk(format, a...) \
- do { \
- if (debug) \
- printk(KERN_DEBUG format, ##a); \
- } while (0)
+#define dprintk(level, format, a...) \
+do { \
+ if (debug > level) \
+ printk(KERN_DEBUG pr_fmt(format), ##a); \
+} while (0)
MODULE_AUTHOR("Johannes Berg");
MODULE_AUTHOR("Stelian Pop");
@@ -273,11 +277,11 @@ static int atp_geyser_init(struct usb_device *udev)
ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- dprintk("atp_geyser_init: read error\n");
+ dprintk(0, "%s(): read error\n", __func__);
for (i = 0; i < 8; i++)
- dprintk("appletouch[%d]: %d\n", i, data[i]);
+ dprintk(0, "[%d]: %d\n", i, data[i]);
- err("Failed to read mode from device.");
+ err("Failed to read mode from device");
ret = -EIO;
goto out_free;
}
@@ -292,9 +296,9 @@ static int atp_geyser_init(struct usb_device *udev)
ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- dprintk("atp_geyser_init: write error\n");
+ dprintk(0, "%s(): write error\n", __func__);
for (i = 0; i < 8; i++)
- dprintk("appletouch[%d]: %d\n", i, data[i]);
+ dprintk(0, "[%d]: %d\n", i, data[i]);
err("Failed to request geyser raw mode");
ret = -EIO;
@@ -316,7 +320,7 @@ static void atp_reinit(struct work_struct *work)
struct usb_device *udev = dev->udev;
int retval;
- dprintk("appletouch: putting appletouch to sleep (reinit)\n");
+ dprintk(0, "putting appletouch to sleep (reinit)\n");
atp_geyser_init(udev);
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -407,9 +411,8 @@ static int atp_status_check(struct urb *urb)
break;
case -EOVERFLOW:
if (!dev->overflow_warned) {
- printk(KERN_WARNING "appletouch: OVERFLOW with data "
- "length %d, actual length is %d\n",
- dev->info->datalen, dev->urb->actual_length);
+ pr_warning("OVERFLOW with data length %d, actual length is %d\n",
+ dev->info->datalen, dev->urb->actual_length);
dev->overflow_warned = true;
}
case -ECONNRESET:
@@ -428,8 +431,7 @@ static int atp_status_check(struct urb *urb)
/* drop incomplete datasets */
if (dev->urb->actual_length != dev->info->datalen) {
- dprintk("appletouch: incomplete data package"
- " (first byte: %d, length: %d).\n",
+ dprintk(0, "incomplete data package (first byte: %d, length: %d)\n",
dev->data[0], dev->urb->actual_length);
return ATP_URB_STATUS_ERROR;
}
@@ -445,7 +447,7 @@ static void atp_detect_size(struct atp *dev)
for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
if (dev->xy_cur[i]) {
- printk(KERN_INFO "appletouch: 17\" model detected.\n");
+ pr_info("17\" model detected.\n");
input_set_abs_params(dev->input, ABS_X, 0,
(dev->info->xsensors_17 - 1) *
@@ -556,10 +558,8 @@ static void atp_complete_geyser_1_2(struct urb *urb)
dev->x_old = x;
dev->y_old = y;
- if (debug > 1)
- printk(KERN_DEBUG "appletouch: "
- "X: %3d Y: %3d Xz: %3d Yz: %3d\n",
- x, y, x_z, y_z);
+ dprintk(1, "X: %3d Y: %3d Xz: %3d Yz: %3d\n",
+ x, y, x_z, y_z);
input_report_key(dev->input, BTN_TOUCH, 1);
input_report_abs(dev->input, ABS_X, x);
@@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
/* Just update the base values (i.e. touchpad in untouched state) */
if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
- dprintk(KERN_DEBUG "appletouch: updated base values\n");
+ dprintk(0, "updated base values\n");
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
goto exit;
@@ -667,10 +667,8 @@ static void atp_complete_geyser_3_4(struct urb *urb)
dev->x_old = x;
dev->y_old = y;
- if (debug > 1)
- printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
- "Xz: %3d Yz: %3d\n",
- x, y, x_z, y_z);
+ dprintk(1, "X: %3d Y: %3d Xz: %3d Yz: %3d\n",
+ x, y, x_z, y_z);
input_report_key(dev->input, BTN_TOUCH, 1);
input_report_abs(dev->input, ABS_X, x);
@@ -755,7 +753,7 @@ static int atp_handle_geyser(struct atp *dev)
if (atp_geyser_init(udev))
return -EIO;
- printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+ pr_info("Geyser mode initialized\n");
}
return 0;
@@ -886,7 +884,7 @@ static void atp_disconnect(struct usb_interface *iface)
usb_free_urb(dev->urb);
kfree(dev);
}
- printk(KERN_INFO "input: appletouch disconnected\n");
+ pr_info("appletouch disconnected\n");
}
static int atp_recover(struct atp *dev)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index ea67c49..8b201dc 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -32,6 +32,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -89,8 +91,8 @@ MODULE_AUTHOR("Henrik Rydberg");
MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
MODULE_LICENSE("GPL");
-#define dprintk(level, format, a...)\
- { if (debug >= level) printk(KERN_DEBUG format, ##a); }
+#define dprintk(level, format, a...) \
+do { if (debug >= level) printk(KERN_DEBUG pr_fmt(format), ##a); } while (0)
static int debug = 1;
module_param(debug, int, 0644);
@@ -322,8 +324,7 @@ static int report_bt_state(struct bcm5974 *dev, int size)
if (size != sizeof(struct bt_data))
return -EIO;
- dprintk(7,
- "bcm5974: button data: %x %x %x %x\n",
+ dprintk(7, "button data: %x %x %x %x\n",
dev->bt_data->unknown1, dev->bt_data->button,
dev->bt_data->rel_x, dev->bt_data->rel_y);
@@ -378,9 +379,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
raw_x = raw2int(f->abs_x);
raw_y = raw2int(f->abs_y);
- dprintk(9,
- "bcm5974: "
- "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ dprintk(9, "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
raw_p, raw_w, raw_x, raw_y, raw_n);
ptest = int2bound(&c->p, raw_p);
@@ -426,9 +425,9 @@ static int report_tp_state(struct bcm5974 *dev, int size)
input_report_abs(input, ABS_X, abs_x);
input_report_abs(input, ABS_Y, abs_y);
- dprintk(8,
- "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
- "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+ dprintk(8, "abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+ "nmin: %d nmax: %d n: %d ibt: %d\n",
+ abs_p, abs_w,
abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
}
@@ -456,7 +455,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
int retval = 0, size;
if (!data) {
- err("bcm5974: out of memory");
+ pr_err("out of memory\n");
retval = -ENOMEM;
goto out;
}
@@ -469,7 +468,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- err("bcm5974: could not read from device");
+ pr_err("could not read from device\n");
retval = -EIO;
goto out;
}
@@ -487,13 +486,12 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
- err("bcm5974: could not write to device");
+ pr_err("could not write to device\n");
retval = -EIO;
goto out;
}
- dprintk(2, "bcm5974: switched to %s mode.\n",
- on ? "wellspring" : "normal");
+ dprintk(2, "switched to %s mode\n", on ? "wellspring" : "normal");
out:
kfree(data);
@@ -512,21 +510,21 @@ static void bcm5974_irq_button(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("bcm5974: button urb shutting down: %d", urb->status);
+ pr_debug("button urb shutting down: %d\n", urb->status);
return;
default:
- dbg("bcm5974: button urb status: %d", urb->status);
+ pr_debug("button urb status: %d\n", urb->status);
goto exit;
}
if (report_bt_state(dev, dev->bt_urb->actual_length))
- dprintk(1, "bcm5974: bad button package, length: %d\n",
+ dprintk(1, "bad button package, length: %d\n",
dev->bt_urb->actual_length);
exit:
error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
if (error)
- err("bcm5974: button urb failed: %d", error);
+ pr_err("button urb failed: %d\n", error);
}
static void bcm5974_irq_trackpad(struct urb *urb)
@@ -541,10 +539,10 @@ static void bcm5974_irq_trackpad(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+ pr_debug("trackpad urb shutting down: %d\n", urb->status);
return;
default:
- dbg("bcm5974: trackpad urb status: %d", urb->status);
+ pr_debug("trackpad urb status: %d\n", urb->status);
goto exit;
}
@@ -553,13 +551,13 @@ static void bcm5974_irq_trackpad(struct urb *urb)
goto exit;
if (report_tp_state(dev, dev->tp_urb->actual_length))
- dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+ dprintk(1, "bad trackpad package, length: %d\n",
dev->tp_urb->actual_length);
exit:
error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
if (error)
- err("bcm5974: trackpad urb failed: %d", error);
+ pr_err("trackpad urb failed: %d\n", error);
}
/*
@@ -586,7 +584,7 @@ static int bcm5974_start_traffic(struct bcm5974 *dev)
error = bcm5974_wellspring_mode(dev, true);
if (error) {
- dprintk(1, "bcm5974: mode switch failed\n");
+ dprintk(1, "mode switch failed\n");
goto err_out;
}
@@ -705,7 +703,7 @@ static int bcm5974_probe(struct usb_interface *iface,
dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
input_dev = input_allocate_device();
if (!dev || !input_dev) {
- err("bcm5974: out of memory");
+ pr_err("out of memory\n");
goto err_free_devs;
}
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index b18862b..a6c41e0 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -171,8 +171,8 @@ static void elantech_packet_dump(unsigned char *packet, int size)
printk(KERN_DEBUG pr_fmt("PS/2 packet ["));
for (i = 0; i < size; i++)
- printk("%s0x%02x ", (i) ? ", " : " ", packet[i]);
- printk("]\n");
+ pr_cont(" 0x%02x", packet[i]);
+ pr_cont(" ]\n");
}
/*
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 3827a22..9a522c1 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -32,6 +32,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
@@ -133,7 +135,7 @@ static int __init inport_init(void)
int err;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
- printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
+ pr_err("Can't allocate ports at %#x\n", INPORT_BASE);
return -EBUSY;
}
@@ -141,14 +143,14 @@ static int __init inport_init(void)
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (a == b || a != c) {
- printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+ pr_info("Didn't find InPort mouse at %#x\n", INPORT_BASE);
err = -ENODEV;
goto err_release_region;
}
inport_dev = input_allocate_device();
if (!inport_dev) {
- printk(KERN_ERR "inport.c: Not enough memory for input device\n");
+ pr_err("Not enough memory for input device\n");
err = -ENOMEM;
goto err_release_region;
}
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index c31ad11..20145dd 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -12,6 +12,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
@@ -169,8 +171,7 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
if (relative_packet) {
if (!dev2)
- printk(KERN_WARNING "lifebook.c: got relative packet "
- "but no relative device set up\n");
+ pr_warning("got relative packet but no relative device set up\n");
} else {
if (lifebook_use_6byte_proto) {
input_report_abs(dev1, ABS_X,
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index e241311..988667f 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -33,6 +33,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
@@ -104,7 +106,7 @@ static irqreturn_t logibm_interrupt(int irq, void *dev_id)
static int logibm_open(struct input_dev *dev)
{
if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
- printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
+ pr_err("Can't allocate irq %d\n", logibm_irq);
return -EBUSY;
}
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
@@ -122,7 +124,7 @@ static int __init logibm_init(void)
int err;
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
- printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
+ pr_err("Can't allocate ports at %#x\n", LOGIBM_BASE);
return -EBUSY;
}
@@ -131,7 +133,7 @@ static int __init logibm_init(void)
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
- printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
+ pr_info("Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
err = -ENODEV;
goto err_release_region;
}
@@ -141,7 +143,7 @@ static int __init logibm_init(void)
logibm_dev = input_allocate_device();
if (!logibm_dev) {
- printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
+ pr_err("Not enough memory for input device\n");
err = -ENOMEM;
goto err_release_region;
}
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index c9983ae..c8c5bbd 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -9,6 +9,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
@@ -84,8 +86,8 @@ static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse)
#ifdef DEBUG
default:
- printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
- (packet[1] >> 4) | (packet[0] & 0x30));
+ pr_warning("Received PS2++ packet #%x, but don't know how to handle\n",
+ (packet[1] >> 4) | (packet[0] & 0x30));
#endif
}
} else {
@@ -382,7 +384,7 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
}
} else {
- printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
+ pr_warning("Detected unknown logitech mouse model %d\n", model);
}
if (set_properties) {
@@ -400,9 +402,8 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
error = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_smartscroll.dattr);
if (error) {
- printk(KERN_ERR
- "logips2pp.c: failed to create smartscroll "
- "sysfs attribute, error: %d\n", error);
+ pr_err("failed to create smartscroll sysfs attribute, error: %d\n",
+ error);
return -1;
}
}
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 7b02b65..37c1854 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -29,6 +29,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -114,22 +116,22 @@ static int __init pc110pad_init(void)
return -ENODEV;
if (!request_region(pc110pad_io, 4, "pc110pad")) {
- printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n",
- pc110pad_io, pc110pad_io + 4);
+ pr_err("I/O area %#x-%#x in use\n",
+ pc110pad_io, pc110pad_io + 4);
return -EBUSY;
}
outb(PC110PAD_OFF, pc110pad_io + 2);
if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) {
- printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
+ pr_err("Unable to get irq %d\n", pc110pad_irq);
err = -EBUSY;
goto err_release_region;
}
pc110pad_dev = input_allocate_device();
if (!pc110pad_dev) {
- printk(KERN_ERR "pc110pad: Not enough memory.\n");
+ pr_err("Not enough memory\n");
err = -ENOMEM;
goto err_free_irq;
}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 73a7af2..ed15ab2 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -11,6 +11,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -251,11 +253,12 @@ static int psmouse_handle_byte(struct psmouse *psmouse)
switch (rc) {
case PSMOUSE_BAD_DATA:
if (psmouse->state == PSMOUSE_ACTIVATED) {
- printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
- psmouse->name, psmouse->phys, psmouse->pktcnt);
+ pr_warning("%s at %s lost sync at byte %d\n",
+ psmouse->name, psmouse->phys,
+ psmouse->pktcnt);
if (++psmouse->out_of_sync_cnt == psmouse->resetafter) {
__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
+ pr_notice("issuing reconnect request\n");
serio_reconnect(psmouse->ps2dev.serio);
return -1;
}
@@ -267,8 +270,8 @@ static int psmouse_handle_byte(struct psmouse *psmouse)
psmouse->pktcnt = 0;
if (psmouse->out_of_sync_cnt) {
psmouse->out_of_sync_cnt = 0;
- printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
- psmouse->name, psmouse->phys);
+ pr_notice("%s at %s - driver resynched\n",
+ psmouse->name, psmouse->phys);
}
break;
@@ -295,9 +298,9 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
if (psmouse->state == PSMOUSE_ACTIVATED)
- printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
- flags & SERIO_TIMEOUT ? " timeout" : "",
- flags & SERIO_PARITY ? " bad parity" : "");
+ pr_warning("bad data from KBC -%s%s\n",
+ flags & SERIO_TIMEOUT ? " timeout" : "",
+ flags & SERIO_PARITY ? " bad parity" : "");
ps2_cmd_aborted(&psmouse->ps2dev);
goto out;
}
@@ -315,8 +318,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (psmouse->state == PSMOUSE_ACTIVATED &&
psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
- printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
- psmouse->name, psmouse->phys, psmouse->pktcnt);
+ pr_info("%s at %s lost synchronization, throwing %d bytes away\n",
+ psmouse->name, psmouse->phys, psmouse->pktcnt);
psmouse->badbyte = psmouse->packet[0];
__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
@@ -943,7 +946,8 @@ static int psmouse_probe(struct psmouse *psmouse)
*/
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS))
- printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", ps2dev->serio->phys);
+ pr_warning("failed to reset mouse on %s\n",
+ ps2dev->serio->phys);
return 0;
}
@@ -1005,8 +1009,8 @@ static void psmouse_initialize(struct psmouse *psmouse)
static void psmouse_activate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE))
- printk(KERN_WARNING "psmouse.c: Failed to enable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ pr_warning("failed to enable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
}
@@ -1020,8 +1024,8 @@ static void psmouse_activate(struct psmouse *psmouse)
static void psmouse_deactivate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- printk(KERN_WARNING "psmouse.c: Failed to deactivate mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ pr_warning("failed to deactivate mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
}
@@ -1115,14 +1119,14 @@ static void psmouse_resync(struct work_struct *work)
}
if (!enabled) {
- printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ pr_warning("failed to re-enable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
failed = true;
}
if (failed) {
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- printk(KERN_INFO "psmouse.c: resync failed, issuing reconnect request\n");
+ pr_info("resync failed, issuing reconnect request\n");
serio_reconnect(serio);
} else
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
@@ -1155,8 +1159,8 @@ static void psmouse_cleanup(struct serio *serio)
* Disable stream mode so cleanup routine can proceed undisturbed.
*/
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ pr_warning("failed to disable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
if (psmouse->cleanup)
psmouse->cleanup(psmouse);
@@ -1400,7 +1404,7 @@ static int psmouse_reconnect(struct serio *serio)
int rc = -1;
if (!drv || !psmouse) {
- printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n");
+ printk(KERN_DEBUG pr_fmt("reconnect request, but serio is disconnected, ignoring...\n"));
return -1;
}
@@ -1586,9 +1590,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co
while (serio->child) {
if (++retry > 3) {
- printk(KERN_WARNING
- "psmouse: failed to destroy child port, "
- "protocol change aborted.\n");
+ pr_warning("failed to destroy child port, protocol change aborted\n");
input_free_device(new_dev);
return -EIO;
}
@@ -1714,7 +1716,7 @@ static int __init psmouse_init(void)
kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
if (!kpsmoused_wq) {
- printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
+ pr_err("failed to create kpsmoused workqueue\n");
return -ENOMEM;
}
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 272dedd..12586ba 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -17,6 +17,8 @@
* the complete state and then work out if something has changed.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
@@ -87,7 +89,7 @@ static int __init rpcmouse_init(void)
rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY);
if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, IRQF_SHARED, "rpcmouse", rpcmouse_dev)) {
- printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
+ pr_err("unable to allocate VSYNC interrupt\n");
err = -EBUSY;
goto err_free_dev;
}
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 1242775..1a4218c 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/module.h>
#include <linux/version.h>
#include <linux/input.h>
@@ -608,11 +610,13 @@ static void fsp_packet_debug(unsigned char packet[])
ps2_packet_cnt++;
jiffies_msec = jiffies_to_msecs(jiffies);
- printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n",
- jiffies_msec, packet[0], packet[1], packet[2], packet[3]);
+ printk(KERN_DEBUG
+ pr_fmt("%08dms PS/2 packets: %02x, %02x, %02x, %02x\n"),
+ jiffies_msec, packet[0], packet[1], packet[2], packet[3]);
if (jiffies_msec - ps2_last_second > 1000) {
- printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt);
+ printk(KERN_DEBUG pr_fmt("PS/2 packets/sec = %d\n"),
+ ps2_packet_cnt);
ps2_packet_cnt = 0;
ps2_last_second = jiffies_msec;
}
@@ -821,8 +825,7 @@ int fsp_init(struct psmouse *psmouse)
return -ENODEV;
}
- printk(KERN_INFO
- "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n",
+ pr_info("Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n",
ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7);
psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index 17ff137b..d809a94 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -26,6 +26,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -186,8 +188,8 @@ static void sermouse_process_ms(struct sermouse *sermouse, signed char data)
default: /* We don't decode anything else yet. */
- printk(KERN_WARNING
- "sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
+ pr_warning("Received MZ++ packet %x, don't know how to handle\n",
+ buf[1]);
break;
}
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 96b70a4..fe78899 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -23,6 +23,8 @@
* Trademarks are the property of their respective owners.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/input.h>
@@ -157,7 +159,7 @@ static int synaptics_capability(struct psmouse *psmouse)
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
- printk(KERN_ERR "Synaptics claims to have extended capabilities,"
+ pr_err("Synaptics claims to have extended capabilities,"
" but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
@@ -173,7 +175,7 @@ static int synaptics_capability(struct psmouse *psmouse)
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
- printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+ pr_err("Synaptics claims to have extended capability 0x0c,"
" but I'm not able to read it.\n");
} else {
priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
@@ -223,7 +225,7 @@ static int synaptics_resolution(struct psmouse *psmouse)
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
- printk(KERN_ERR "Synaptics claims to have dimensions query,"
+ pr_err("Synaptics claims to have dimensions query,"
" but I'm not able to read it.\n");
} else {
priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
@@ -327,7 +329,7 @@ static void synaptics_pt_activate(struct psmouse *psmouse)
priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
if (synaptics_mode_cmd(psmouse, priv->mode))
- printk(KERN_INFO "synaptics: failed to switch guest protocol\n");
+ pr_info("failed to switch guest protocol\n");
}
}
@@ -337,7 +339,7 @@ static void synaptics_pt_create(struct psmouse *psmouse)
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio) {
- printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n");
+ pr_err("not enough memory to allocate pass-through port\n");
return;
}
@@ -349,7 +351,7 @@ static void synaptics_pt_create(struct psmouse *psmouse)
psmouse->pt_activate = synaptics_pt_activate;
- printk(KERN_INFO "serio: %s port at %s\n", serio->name, psmouse->phys);
+ pr_info("%s port at %s\n", serio->name, psmouse->phys);
serio_register_port(serio);
}
@@ -552,7 +554,7 @@ static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned cha
return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
default:
- printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type);
+ pr_err("unknown packet type %d\n", pkt_type);
return 0;
}
}
@@ -563,7 +565,7 @@ static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse)
for (i = 0; i < 5; i++)
if (!synaptics_validate_byte(psmouse->packet, i, SYN_NEWABS_STRICT)) {
- printk(KERN_INFO "synaptics: using relaxed packet validation\n");
+ pr_info("using relaxed packet validation\n");
return SYN_NEWABS_RELAXED;
}
@@ -663,7 +665,7 @@ static int synaptics_reconnect(struct psmouse *psmouse)
return -1;
if (synaptics_query_hardware(psmouse)) {
- printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+ pr_err("Unable to query Synaptics hardware\n");
return -1;
}
@@ -674,7 +676,7 @@ static int synaptics_reconnect(struct psmouse *psmouse)
return -1;
if (synaptics_set_absolute_mode(psmouse)) {
- printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
+ pr_err("Unable to initialize Synaptics hardware\n");
return -1;
}
@@ -736,18 +738,18 @@ int synaptics_init(struct psmouse *psmouse)
psmouse_reset(psmouse);
if (synaptics_query_hardware(psmouse)) {
- printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+ pr_err("Unable to query Synaptics hardware\n");
goto init_fail;
}
if (synaptics_set_absolute_mode(psmouse)) {
- printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
+ pr_err("Unable to initialize Synaptics hardware\n");
goto init_fail;
}
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
+ pr_info("Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
@@ -782,7 +784,7 @@ int synaptics_init(struct psmouse *psmouse)
* thye same as rate of standard PS/2 mouse.
*/
if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
- printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
+ pr_info("Toshiba %s detected, limiting rate to 40pps\n",
dmi_get_system_info(DMI_PRODUCT_NAME));
psmouse->rate = 40;
}
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 0643e49..3a7d24f 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -8,6 +8,8 @@
* Trademarks are the property of their respective owners.
*/
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serio.h>
@@ -297,7 +299,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
return 0;
if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) {
- printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n");
+ pr_warning("failed to get extended button data\n");
button_info = 0;
}
@@ -319,15 +321,13 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
if (error) {
- printk(KERN_ERR
- "trackpoint.c: failed to create sysfs attributes, error: %d\n",
- error);
+ pr_err("failed to create sysfs attributes, error: %d\n", error);
kfree(psmouse->private);
psmouse->private = NULL;
return -1;
}
- printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
+ pr_info("IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f);
return 0;
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index bf2c0c8..7af4bc6 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -76,6 +76,8 @@
* http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -92,9 +94,9 @@ MODULE_LICENSE("GPL");
#undef VSXXXAA_DEBUG
#ifdef VSXXXAA_DEBUG
-#define DBG(x...) printk(x)
+#define DBG(format, arg...) pr_info(format, ##arg)
#else
-#define DBG(x...) do {} while (0)
+#define DBG(format, arg...) do { if (0) pr_info(format, ##arg); } while (0)
#endif
#define VSXXXAA_INTRO_MASK 0x80
@@ -137,12 +139,12 @@ static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
{
if (mouse->count == BUFLEN) {
- printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
- mouse->name, mouse->phys);
+ pr_err("%s on %s: Dropping a byte of full buffer\n",
+ mouse->name, mouse->phys);
vsxxxaa_drop_bytes(mouse, 1);
}
- DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
+ DBG("Queueing byte 0x%02x\n", byte);
mouse->buf[mouse->count++] = byte;
}
@@ -167,8 +169,7 @@ static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
break;
}
- printk(KERN_INFO
- "Found %s version 0x%02x from country 0x%02x on port %s\n",
+ pr_info("Found %s version 0x%02x from country 0x%02x on port %s\n",
mouse->name, mouse->version, mouse->country, mouse->phys);
}
@@ -188,10 +189,9 @@ static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
/* Check all following bytes */
for (i = 1; i < packet_len; i++) {
if (IS_HDR_BYTE(mouse->buf[i])) {
- printk(KERN_ERR
- "Need to drop %d bytes of a broken packet.\n",
- i - 1);
- DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
+ pr_err("Need to drop %d bytes of a broken packet\n",
+ i - 1);
+ DBG("check: len=%d, b[%d]=0x%02x\n",
packet_len, i, mouse->buf[i]);
return i - 1;
}
@@ -246,7 +246,7 @@ static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
vsxxxaa_drop_bytes(mouse, 3);
- DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
+ DBG("%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
mouse->name, mouse->phys, dx, dy,
left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
@@ -297,7 +297,7 @@ static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
vsxxxaa_drop_bytes(mouse, 5);
- DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
+ DBG("%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
mouse->name, mouse->phys, x, y,
left ? "L" : "l", middle ? "M" : "m",
right ? "R" : "r", touch ? "T" : "t");
@@ -365,7 +365,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
input_sync(dev);
if (error != 0)
- printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
+ pr_info("Your %s on %s reports error=0x%02x\n",
mouse->name, mouse->phys, error);
}
@@ -374,10 +374,9 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
* If the mouse was hot-plugged, we need to force differential mode
* now... However, give it a second to recover from it's reset.
*/
- printk(KERN_NOTICE
- "%s on %s: Forcing standard packet format, "
- "incremental streaming mode and 72 samples/sec\n",
- mouse->name, mouse->phys);
+ pr_notice("%s on %s: Forcing standard packet format, "
+ "incremental streaming mode and 72 samples/sec\n",
+ mouse->name, mouse->phys);
serio_write(mouse->serio, 'S'); /* Standard format */
mdelay(50);
serio_write(mouse->serio, 'R'); /* Incremental */
@@ -402,9 +401,9 @@ static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
* activity on the mouse.
*/
while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
- printk(KERN_ERR "%s on %s: Dropping a byte to regain "
- "sync with mouse data stream...\n",
- mouse->name, mouse->phys);
+ pr_err("%s on %s: Dropping a byte to regain "
+ "sync with mouse data stream...\n",
+ mouse->name, mouse->phys);
vsxxxaa_drop_bytes(mouse, 1);
}
@@ -437,8 +436,7 @@ static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
}
if (stray_bytes > 0) {
- printk(KERN_ERR "Dropping %d bytes now...\n",
- stray_bytes);
+ pr_err("Dropping %d bytes now...\n", stray_bytes);
vsxxxaa_drop_bytes(mouse, stray_bytes);
}
--
1.7.2.19.g9a302
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
