On Sat, 2010-07-31 at 10:37 -0400, Jon Smirl wrote: > On Sat, Jul 31, 2010 at 10:28 AM, Maxim Levitsky > <maximlevitsky@xxxxxxxxx> wrote: > > On Sat, 2010-07-31 at 09:55 -0400, Andy Walls wrote: > >> On Fri, 2010-07-30 at 15:45 +0300, Maxim Levitsky wrote: > >> > On Fri, 2010-07-30 at 08:07 -0400, Jon Smirl wrote: > >> > > On Fri, Jul 30, 2010 at 8:02 AM, Jon Smirl <jonsmirl@xxxxxxxxx> wrote: > >> > > > On Fri, Jul 30, 2010 at 7:54 AM, Maxim Levitsky <maximlevitsky@xxxxxxxxx> wrote: > >> > >> > > >> > > > > >> > > > + pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) + > >> > > > + (ene_hw_read_reg(dev, ENE_PLLFRL) >> 2); > >> > > > >> > > >> > > >> > > I can understand the shift of the high bits, but that shift of the low > >> > > bits is unlikely. A manual would tell us if it is right. > >> > > > >> > This shift is correct (according to datasheet, which contains mostly > >> > useless info, but it does dociment this reg briefly.) > >> > >> The KB3700 series datasheet indicates that the value from ENE_PLLFRL > >> should be shifted by >> 4 bits, not by >> 2. Of course, the KB3700 > >> isn't the exact same chip. > > You are right about that, thanks! > > I looked at KB3700 manual. It says it is trying to make a 32Mhz clock > by multiplying 32.768Khz * 1000. > > 32,768 * 1000 = 32.768Mhz is a 2.4% error. > > When you are computing the timings of the pulses did you assume a > 32Mhz clock? It looks like the clock is actuall 32.768Mhz. No, I just take the samples hardware give me. Lets just leave this as is. Best regards, Maxim Levitsky -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
