Add explicit key mappings for TwinHan USB HID remote control.
All dummy Ctrl, Alt, Meta, ... key press/release events generated
by the remote are silenced by "unmapping" them. This makes Power and
Volume keys single-key and strips the regular (even while idle) key
release events for Ctrl, Alt, Meta, ...
Signed-off-by: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
---
On Mon, 13 July 2009 Jiri Kosina <jkosina@xxxxxxx> wrote:
> > > > + // set_bit(EV_REP, hi->input->evbit);
> > > Why is this commented out?
> > That was a remaining line from basing on hid-gyration.c Don't know
> > what it does, looks like related to key repeating but I've not read
> > enough of HID/Input code to find out. (all my tests were run with
> > it commented out, so I will drop it unless there is a good reason
> > to uncomment it)
>
> Yes, EV_REP is a flag which signals whether the keys produced by the
> device in question should be auto-repreated.
Remote always sends press/release events (and does send them again
repeatedly if the key remains pressed), so this has no effect anyhow,
dropped
> > With my patch it seems the mappings don't show up for EVIOCGKEYCODE:
> >
> > int codes[2];
> > for (codes[0] = 0; codes[0] < 1024; codes[0]++)
> > if (ioctl(evdev, EVIOCGKEYCODE, codes) >= 0) {
> > // display
> > } else
> > break;
> >
> > Code block above only displays for codes[0] == 0:
> > codes = { 0, 388 /* KEY_TEXT */ }
> >
> > For all other values of codes[0] ioctl returns EINVAL.
> >
> > Is this expected or should complete mapping table be returned
> > as it is for generic PS2 PC keyboard (if so, what changes does the
> > patch need for it)?
>
> The HID core's perception of scancode is the actual HID usage as
> reported by the device, inlcuding the page number.
>
> I.e. for your device, the usages would be in 0x70004 - 0x70052 range,
> not 0-1024 (which is what your current code is checking for).
Ok, with the range changed it's fine
> Also, looking at the patch again -- could you please keep the usage
> numbers sorted in the switch-case in twinhan_input_mapping(), so that
> it's more readable and compatible with other drivers?
I sorted them and now return -1 for all keys not present on the remote,
this way the mapping table is "clean" and does not contain default
keyboard keys.
Note: checkpatch complains about the break at line-end but I ignored
those errors as that's common practice for all hid drivers I looked into.
drivers/hid/Kconfig | 7 ++
drivers/hid/Makefile | 1 +
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 3 +
drivers/hid/hid-twinhan.c | 147 +++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 159 insertions(+), 0 deletions(-)
---
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7831a03..d972c7d 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -152,6 +152,13 @@ config HID_GYRATION
---help---
Support for Gyration remote control.
+config HID_TWINHAN
+ tristate "Twinhan" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Twinhan IR remote control.
+
config HID_KENSINGTON
tristate "Kensington" if EMBEDDED
depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index db35151..9b9271d 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
+obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f2c21d5..ed8766f 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1312,6 +1312,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6301010..a20fef8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -403,6 +403,9 @@
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
+#define USB_VENDOR_ID_TWINHAN 0x6253
+#define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100
+
#define USB_VENDOR_ID_UCLOGIC 0x5543
#define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042
diff --git a/drivers/hid/hid-twinhan.c b/drivers/hid/hid-twinhan.c
new file mode 100644
index 0000000..0d33c61
--- /dev/null
+++ b/drivers/hid/hid-twinhan.c
@@ -0,0 +1,147 @@
+/*
+ * HID driver for TwinHan IR remote control
+ *
+ * Based on hid-gyration.c
+ *
+ * Copyright (c) 2009 Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/* Remote control key layout + listing:
+ *
+ * Full Screen Power
+ * KEY_SCREEN KEY_POWER2
+ *
+ * 1 2 3
+ * KEY_NUMERIC_1 KEY_NUMERIC_2 KEY_NUMERIC_3
+ *
+ * 4 5 6
+ * KEY_NUMERIC_4 KEY_NUMERIC_5 KEY_NUMERIC_6
+ *
+ * 7 8 9
+ * KEY_NUMERIC_7 KEY_NUMERIC_8 KEY_NUMERIC_9
+ *
+ * REC 0 Favorite
+ * KEY_RECORD KEY_NUMERIC_0 KEY_FAVORITES
+ *
+ * Rewind Forward
+ * KEY_REWIND CH+ KEY_FORWARD
+ * KEY_CHANNELUP
+ *
+ * VOL- > VOL+
+ * KEY_VOLUMEDOWN KEY_PLAY KEY_VOLUMEUP
+ *
+ * CH-
+ * KEY_CHANNELDOWN
+ * Recall Stop
+ * KEY_RESTART KEY_STOP
+ *
+ * Timeshift/Pause Mute Cancel
+ * KEY_PAUSE KEY_MUTE KEY_CANCEL
+ *
+ * Capture Preview EPG
+ * KEY_PRINT KEY_PROGRAM KEY_EPG
+ *
+ * Record List Tab Teletext
+ * KEY_LIST KEY_TAB KEY_TEXT
+ */
+
+#define th_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \
+ EV_KEY, (c))
+static int twinhan_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_KEYBOARD)
+ return 0;
+
+ switch (usage->hid & HID_USAGE) {
+ /* Map all keys from Twinhan Remote */
+ case 0x004: th_map_key_clear(KEY_TEXT); break;
+ case 0x006: th_map_key_clear(KEY_RESTART); break;
+ case 0x008: th_map_key_clear(KEY_EPG); break;
+ case 0x00c: th_map_key_clear(KEY_REWIND); break;
+ case 0x00e: th_map_key_clear(KEY_PROGRAM); break;
+ case 0x00f: th_map_key_clear(KEY_LIST); break;
+ case 0x010: th_map_key_clear(KEY_MUTE); break;
+ case 0x011: th_map_key_clear(KEY_FORWARD); break;
+ case 0x013: th_map_key_clear(KEY_PRINT); break;
+ case 0x017: th_map_key_clear(KEY_PAUSE); break;
+ case 0x019: th_map_key_clear(KEY_FAVORITES); break;
+ case 0x01d: th_map_key_clear(KEY_SCREEN); break;
+ case 0x01e: th_map_key_clear(KEY_NUMERIC_1); break;
+ case 0x01f: th_map_key_clear(KEY_NUMERIC_2); break;
+ case 0x020: th_map_key_clear(KEY_NUMERIC_3); break;
+ case 0x021: th_map_key_clear(KEY_NUMERIC_4); break;
+ case 0x022: th_map_key_clear(KEY_NUMERIC_5); break;
+ case 0x023: th_map_key_clear(KEY_NUMERIC_6); break;
+ case 0x024: th_map_key_clear(KEY_NUMERIC_7); break;
+ case 0x025: th_map_key_clear(KEY_NUMERIC_8); break;
+ case 0x026: th_map_key_clear(KEY_NUMERIC_9); break;
+ case 0x027: th_map_key_clear(KEY_NUMERIC_0); break;
+ case 0x028: th_map_key_clear(KEY_PLAY); break;
+ case 0x029: th_map_key_clear(KEY_CANCEL); break;
+ case 0x02b: th_map_key_clear(KEY_TAB); break;
+ /* Power = 0x0e0 + 0x0e1 + 0x0e2 + 0x03f */
+ case 0x03f: th_map_key_clear(KEY_POWER2); break;
+ case 0x04a: th_map_key_clear(KEY_RECORD); break;
+ case 0x04b: th_map_key_clear(KEY_CHANNELUP); break;
+ case 0x04d: th_map_key_clear(KEY_STOP); break;
+ case 0x04e: th_map_key_clear(KEY_CHANNELDOWN); break;
+ /* Volume down = 0x0e1 + 0x051 */
+ case 0x051: th_map_key_clear(KEY_VOLUMEDOWN); break;
+ /* Volume up = 0x0e1 + 0x052 */
+ case 0x052: th_map_key_clear(KEY_VOLUMEUP); break;
+ /* Kill the extra keys used for multi-key "power" and "volume" keys
+ * as well as continuously to release CTRL,ALT,META,... keys */
+ case 0x0e0:
+ case 0x0e1:
+ case 0x0e2:
+ case 0x0e3:
+ case 0x0e4:
+ case 0x0e5:
+ case 0x0e6:
+ case 0x0e7:
+ default:
+ return -1;
+ }
+ return 1;
+}
+
+static const struct hid_device_id twinhan_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, twinhan_devices);
+
+static struct hid_driver twinhan_driver = {
+ .name = "twinhan",
+ .id_table = twinhan_devices,
+ .input_mapping = twinhan_input_mapping,
+};
+
+static int twinhan_init(void)
+{
+ return hid_register_driver(&twinhan_driver);
+}
+
+static void twinhan_exit(void)
+{
+ hid_unregister_driver(&twinhan_driver);
+}
+
+module_init(twinhan_init);
+module_exit(twinhan_exit);
+MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
