There are several issues with the function that implements writing to the filter_low_pass_3db_frequency property: - The sinc3 factor should be 0.272 not 0.262 (this is fixed for the reading side in the previous patch). - For freq > 1 the if condition is always true so the sinc4 filter is hardly ever chosen. - In the nearly always taken if branch the filter is set to sinc3, but the frequency is set for sinc4. (And vice versa in the else branch.) This is broken enough to justify the claim that there isn't any serious user. Also it it counter-intuitive that setting the 3db frequency modifies the sample frequency and the filter type. So drop the ability to write that property. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx> --- drivers/iio/adc/ad7124.c | 36 +----------------------------------- 1 file changed, 1 insertion(+), 35 deletions(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index 7d5d84a07cae..662a3eb2f90e 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -309,32 +309,6 @@ static int ad7124_get_3db_filter_freq(struct ad7124_state *st, } } -static void ad7124_set_3db_filter_freq(struct ad7124_state *st, unsigned int channel, - unsigned int freq) -{ - unsigned int sinc4_3db_odr; - unsigned int sinc3_3db_odr; - unsigned int new_filter; - unsigned int new_odr; - - sinc4_3db_odr = DIV_ROUND_CLOSEST(freq * 1000, 230); - sinc3_3db_odr = DIV_ROUND_CLOSEST(freq * 1000, 262); - - if (sinc4_3db_odr > sinc3_3db_odr) { - new_filter = AD7124_SINC3_FILTER; - new_odr = sinc4_3db_odr; - } else { - new_filter = AD7124_SINC4_FILTER; - new_odr = sinc3_3db_odr; - } - - if (new_odr != st->channels[channel].cfg.odr) - st->channels[channel].cfg.live = false; - - st->channels[channel].cfg.filter_type = new_filter; - st->channels[channel].cfg.odr = new_odr; -} - static struct ad7124_channel_config *ad7124_find_similar_live_cfg(struct ad7124_state *st, struct ad7124_channel_config *cfg) { @@ -739,16 +713,8 @@ static int ad7124_write_raw(struct iio_dev *indio_dev, st->channels[chan->address].cfg.pga_bits = res; break; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - if (val2 != 0) { - ret = -EINVAL; - break; - } - - ad7124_set_3db_filter_freq(st, chan->address, val); - break; default: - ret = -EINVAL; + ret = -EINVAL; } mutex_unlock(&st->cfgs_lock); -- 2.47.1