[PATCH 2/8] iio: accel: mma8452: Factor out guts of write_raw() to simplify locking

[Jonathan Cameron <jic23@xxxxxxxxxx>]

From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Factoring out those parts of write_raw() in which direct mode is held
allows for direct returns on errors, simplifying the code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
 drivers/iio/accel/mma8452.c | 78 ++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 41 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 1b2014c4c4b4..8ce4ddadc559 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -707,55 +707,45 @@ static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
 	return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg);
 }
 
-static int mma8452_write_raw(struct iio_dev *indio_dev,
+static int __mma8452_write_raw(struct iio_dev *indio_dev,
 			     struct iio_chan_spec const *chan,
 			     int val, int val2, long mask)
 {
 	struct mma8452_data *data = iio_priv(indio_dev);
 	int i, j, ret;
 
-	ret = iio_device_claim_direct_mode(indio_dev);
-	if (ret)
-		return ret;
-
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		i = mma8452_get_samp_freq_index(data, val, val2);
-		if (i < 0) {
-			ret = i;
-			break;
-		}
+		if (i < 0)
+			return i;
+
 		data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
 		data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
 
 		data->sleep_val = mma8452_calculate_sleep(data);
 
-		ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
-					    data->ctrl_reg1);
-		break;
+		return mma8452_change_config(data, MMA8452_CTRL_REG1,
+					     data->ctrl_reg1);
+
 	case IIO_CHAN_INFO_SCALE:
 		i = mma8452_get_scale_index(data, val, val2);
-		if (i < 0) {
-			ret = i;
-			break;
-		}
+		if (i < 0)
+			return  i;
 
 		data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
 		data->data_cfg |= i;
 
-		ret = mma8452_change_config(data, MMA8452_DATA_CFG,
-					    data->data_cfg);
-		break;
+		return mma8452_change_config(data, MMA8452_DATA_CFG,
+					     data->data_cfg);
+
 	case IIO_CHAN_INFO_CALIBBIAS:
-		if (val < -128 || val > 127) {
-			ret = -EINVAL;
-			break;
-		}
+		if (val < -128 || val > 127)
+			return -EINVAL;
 
-		ret = mma8452_change_config(data,
-					    MMA8452_OFF_X + chan->scan_index,
-					    val);
-		break;
+		return mma8452_change_config(data,
+					     MMA8452_OFF_X + chan->scan_index,
+					     val);
 
 	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
 		if (val == 0 && val2 == 0) {
@@ -764,32 +754,38 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
 			data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
 			ret = mma8452_set_hp_filter_frequency(data, val, val2);
 			if (ret < 0)
-				break;
+				return ret;
 		}
 
-		ret = mma8452_change_config(data, MMA8452_DATA_CFG,
+		return mma8452_change_config(data, MMA8452_DATA_CFG,
 					     data->data_cfg);
-		break;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		j = mma8452_get_odr_index(data);
 
 		for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
-			if (mma8452_os_ratio[i][j] == val) {
-				ret = mma8452_set_power_mode(data, i);
-				break;
-			}
+			if (mma8452_os_ratio[i][j] == val)
+				return mma8452_set_power_mode(data, i);
 		}
-		if (i == ARRAY_SIZE(mma8452_os_ratio)) {
-			ret = -EINVAL;
-			break;
-		}
-		break;
+
+		return -EINVAL;
+
 	default:
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
+}
+
+static int mma8452_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 
+	ret = __mma8452_write_raw(indio_dev, chan, val, val2, mask);
 	iio_device_release_direct_mode(indio_dev);
 	return ret;
 }
-- 
2.48.1