On Tue, 10 Dec 2024 10:46:42 +0000, Guillaume Stols wrote: > A new compatible is added to reflect the specialized version of the HDL. > We use the parallel interface to write the ADC's registers, and > accessing this interface requires to use > ADI_AXI_REG_CONFIG_RD,ADI_AXI_REG_CONFIG_WR and ADI_AXI_REG_CONFIG_CTRL > in a custom fashion. > > Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx> > --- > .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 53 ++++++++++++++++++++++ > 1 file changed, 53 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: axi-adc@44a00000: '#address-cells', '#size-cells', 'adi_adc@0' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adi_adc@0: pwm-names:0: 'convst1' was expected from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adi_adc@0: pwm-names: ['cnvst_n'] is too short from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adi_adc@0: 'vdrive-supply' is a required property from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241210-ad7606_add_iio_backend_software_mode-v2-2-6619c3e50d81@xxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
