Since we must access the bus parallel bus using a custom procedure,
let's add a specialized compatible, and define specialized callbacks for
writing the registers using the parallel interface.
Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx>
---
drivers/iio/adc/ad7606_bi.h | 16 +++++++
drivers/iio/adc/adi-axi-adc.c | 100 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 116 insertions(+)
diff --git a/drivers/iio/adc/ad7606_bi.h b/drivers/iio/adc/ad7606_bi.h
new file mode 100644
index 000000000000..9ade23ec61dd
--- /dev/null
+++ b/drivers/iio/adc/ad7606_bi.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2010-2024 Analog Devices Inc.
+ * Copyright (c) 2024 Baylibre, SAS
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD7606_H__
+#define __LINUX_PLATFORM_DATA_AD7606_H__
+
+#include <linux/iio/backend.h>
+
+struct ad7606_platform_data {
+ int (*bus_reg_read)(struct iio_backend *back, u32 reg, u32 *val);
+ int (*bus_reg_write)(struct iio_backend *back, u32 reg, u32 val);
+};
+
+#endif /* __LINUX_PLATFORM_DATA_AD7606_H__ */
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index 7ff636643e56..b8bcf89417b0 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -27,6 +27,7 @@
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
+#include "ad7606_bi.h"
/*
* Register definitions:
* https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map
@@ -73,6 +74,12 @@
#define ADI_AXI_ADC_REG_DELAY(l) (0x0800 + (l) * 0x4)
#define AXI_ADC_DELAY_CTRL_MASK GENMASK(4, 0)
+#define ADI_AXI_REG_CONFIG_WR 0x0080
+#define ADI_AXI_REG_CONFIG_RD 0x0084
+#define ADI_AXI_REG_CONFIG_CTRL 0x008c
+#define ADI_AXI_REG_CONFIG_CTRL_READ 0x03
+#define ADI_AXI_REG_CONFIG_CTRL_WRITE 0x01
+
#define ADI_AXI_ADC_MAX_IO_NUM_LANES 15
#define ADI_AXI_REG_CHAN_CTRL_DEFAULTS \
@@ -80,6 +87,11 @@
ADI_AXI_REG_CHAN_CTRL_FMT_EN | \
ADI_AXI_REG_CHAN_CTRL_ENABLE)
+/* AD7606's specific */
+#define AD7606_REG_READ_BIT 0x8000
+#define AD7606_REG_ADDRESS_MASK 0xff00
+#define AD7606_REG_VALUE_MASK 0x00ff
+
struct axi_adc_info {
unsigned int version;
const struct iio_backend_info *backend_info;
@@ -313,6 +325,80 @@ static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
return iio_dmaengine_buffer_setup(st->dev, indio_dev, dma_name);
}
+static int axi_adc_raw_write(struct iio_backend *back, void *buf, unsigned int len)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ u32 data;
+ u32 *bdata = buf;
+
+ data = *bdata;
+ regmap_write(st->regmap, ADI_AXI_REG_CONFIG_WR, data);
+ regmap_write(st->regmap, ADI_AXI_REG_CONFIG_CTRL,
+ ADI_AXI_REG_CONFIG_CTRL_WRITE);
+ usleep_range(50, 100);
+ regmap_write(st->regmap, ADI_AXI_REG_CONFIG_CTRL, 0x00);
+ usleep_range(50, 100);
+
+ return 0;
+}
+
+static int axi_adc_raw_read(struct iio_backend *back, void *buf, unsigned int len)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ u32 *bdata = buf;
+
+ regmap_write(st->regmap, ADI_AXI_REG_CONFIG_CTRL,
+ ADI_AXI_REG_CONFIG_CTRL_READ);
+ usleep_range(50, 100);
+ regmap_read(st->regmap, ADI_AXI_REG_CONFIG_RD, bdata);
+ regmap_write(st->regmap, ADI_AXI_REG_CONFIG_CTRL, 0x00);
+ usleep_range(50, 100);
+
+ return 0;
+}
+
+static int ad7606_bi_reg_read(struct iio_backend *back, u32 reg, u32 *val)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ u32 buf;
+
+ guard(mutex)(&st->lock);
+
+ /*
+ * The address is written on the highest weight byte, and the MSB set at 1
+ * indicates a read operation.
+ */
+ buf = FIELD_PREP(AD7606_REG_ADDRESS_MASK, reg) | AD7606_REG_READ_BIT;
+ axi_adc_raw_write(back, &buf, sizeof(buf));
+ axi_adc_raw_read(back, val, 4);
+
+ /* Write 0x0 on the bus to get back to ADC mode */
+ buf = 0;
+ axi_adc_raw_write(back, &buf, sizeof(buf));
+ return 0;
+}
+
+static int ad7606_bi_reg_write(struct iio_backend *back, u32 reg, u32 val)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ u32 buf;
+
+ guard(mutex)(&st->lock);
+
+ /* Read any register to switch to register mode */
+ buf = 0xaf00;
+ axi_adc_raw_write(back, &buf, sizeof(buf));
+
+ buf = FIELD_PREP(AD7606_REG_ADDRESS_MASK, reg) | FIELD_PREP(AD7606_REG_VALUE_MASK, val);
+ axi_adc_raw_write(back, &buf, sizeof(buf));
+
+ /* Write 0x0 on the bus to get back to ADC mode */
+ buf = 0;
+ axi_adc_raw_write(back, &buf, sizeof(buf));
+
+ return 0;
+}
+
static void axi_adc_free_buffer(struct iio_backend *back,
struct iio_buffer *buffer)
{
@@ -487,9 +573,23 @@ static const struct axi_adc_info adc_generic = {
.backend_info = &adi_axi_adc_generic,
};
+static const struct ad7606_platform_data ad7606_pdata = {
+ .bus_reg_read = ad7606_bi_reg_read,
+ .bus_reg_write = ad7606_bi_reg_write,
+};
+
+static const struct axi_adc_info adc_ad7606 = {
+ .version = ADI_AXI_PCORE_VER(10, 0, 'a'),
+ .backend_info = &adi_axi_adc_generic,
+ .bus_controller = true,
+ .pdata = &ad7606_pdata,
+ .pdata_sz = sizeof(ad7606_pdata),
+};
+
/* Match table for of_platform binding */
static const struct of_device_id adi_axi_adc_of_match[] = {
{ .compatible = "adi,axi-adc-10.0.a", .data = &adc_generic },
+ { .compatible = "adi,axi-ad7606x", .data = &adc_ad7606 },
{ /* end of list */ }
};
MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match);
--
2.34.1
