Re: [PATCH v6 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 06, 2024 at 05:56:23PM -0500, Frank Li wrote:
> Use devm_* and dev_err_probe() simplify probe function and remove
> vf610_adc_remove().

This patch already in linux-next, send out accidently. please forget it.
sorry for that.

Frank

>
> Reviewed-by: Haibo Chen <haibo.chen@xxxxxxx>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> Change from v5 to v6
> - none
>
> Change from v4 to v5
> - Remove vref check in remove action callback
>
> Change from v3 to v4
> - keep vref_uv as u32
> - keep original regulator part and only add
> devm_add_action_or_reset(&pdev->dev, vf610_adc_remove, info)
>
> Change from v2 to v3
> - change vref_uv to int from u32 to fix below warning
> | Reported-by: kernel test robot <lkp@xxxxxxxxx>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202411070633.NIrO7Ert-lkp@xxxxxxxxx/
> smatch warnings:
> drivers/iio/adc/vf610_adc.c:857 vf610_adc_probe() warn: unsigned 'info->vref_uv' is never less than zero.
>
> vim +857 drivers/iio/adc/vf610_adc.c
>
> Change from v1 to v2
> - add Haibo's review tag
> ---
>  drivers/iio/adc/vf610_adc.c | 78 ++++++++++++-------------------------
>  1 file changed, 25 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
> index 4d83c12975c53..fb7afa91151f2 100644
> --- a/drivers/iio/adc/vf610_adc.c
> +++ b/drivers/iio/adc/vf610_adc.c
> @@ -814,6 +814,13 @@ static const struct of_device_id vf610_adc_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, vf610_adc_match);
>
> +static void vf610_adc_action_remove(void *d)
> +{
> +	struct vf610_adc *info = d;
> +
> +	regulator_disable(info->vref);
> +}
> +
>  static int vf610_adc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -823,10 +830,8 @@ static int vf610_adc_probe(struct platform_device *pdev)
>  	int ret;
>
>  	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
> -	if (!indio_dev) {
> -		dev_err(&pdev->dev, "Failed allocating iio device\n");
> -		return -ENOMEM;
> -	}
> +	if (!indio_dev)
> +		return dev_err_probe(&pdev->dev, -ENOMEM, "Failed allocating iio device\n");
>
>  	info = iio_priv(indio_dev);
>  	info->dev = &pdev->dev;
> @@ -842,17 +847,12 @@ static int vf610_adc_probe(struct platform_device *pdev)
>  	ret = devm_request_irq(info->dev, irq,
>  				vf610_adc_isr, 0,
>  				dev_name(&pdev->dev), indio_dev);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret, "failed requesting irq, irq = %d\n", irq);
>
> -	info->clk = devm_clk_get(&pdev->dev, "adc");
> -	if (IS_ERR(info->clk)) {
> -		dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
> -						PTR_ERR(info->clk));
> -		return PTR_ERR(info->clk);
> -	}
> +	info->clk = devm_clk_get_enabled(&pdev->dev, "adc");
> +	if (IS_ERR(info->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(info->clk), "failed getting clock\n");
>
>  	info->vref = devm_regulator_get(&pdev->dev, "vref");
>  	if (IS_ERR(info->vref))
> @@ -862,6 +862,10 @@ static int vf610_adc_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>
> +	ret = devm_add_action_or_reset(&pdev->dev, vf610_adc_action_remove, info);
> +	if (ret)
> +		return ret;
> +
>  	info->vref_uv = regulator_get_voltage(info->vref);
>
>  	device_property_read_u32_array(dev, "fsl,adck-max-frequency", info->max_adck_rate, 3);
> @@ -879,52 +883,21 @@ static int vf610_adc_probe(struct platform_device *pdev)
>  	indio_dev->channels = vf610_adc_iio_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
>
> -	ret = clk_prepare_enable(info->clk);
> -	if (ret) {
> -		dev_err(&pdev->dev,
> -			"Could not prepare or enable the clock.\n");
> -		goto error_adc_clk_enable;
> -	}
> -
>  	vf610_adc_cfg_init(info);
>  	vf610_adc_hw_init(info);
>
> -	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
> -					NULL, &iio_triggered_buffer_setup_ops);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "Couldn't initialise the buffer\n");
> -		goto error_iio_device_register;
> -	}
> +	ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev, &iio_pollfunc_store_time,
> +					      NULL, &iio_triggered_buffer_setup_ops);
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret, "Couldn't initialise the buffer\n");
>
>  	mutex_init(&info->lock);
>
> -	ret = iio_device_register(indio_dev);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Couldn't register the device.\n");
> -		goto error_adc_buffer_init;
> -	}
> +	ret = devm_iio_device_register(&pdev->dev, indio_dev);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "Couldn't register the device.\n");
>
>  	return 0;
> -
> -error_adc_buffer_init:
> -	iio_triggered_buffer_cleanup(indio_dev);
> -error_iio_device_register:
> -	clk_disable_unprepare(info->clk);
> -error_adc_clk_enable:
> -	regulator_disable(info->vref);
> -
> -	return ret;
> -}
> -
> -static void vf610_adc_remove(struct platform_device *pdev)
> -{
> -	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> -	struct vf610_adc *info = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -	iio_triggered_buffer_cleanup(indio_dev);
> -	regulator_disable(info->vref);
> -	clk_disable_unprepare(info->clk);
>  }
>
>  static int vf610_adc_suspend(struct device *dev)
> @@ -972,7 +945,6 @@ static DEFINE_SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend,
>
>  static struct platform_driver vf610_adc_driver = {
>  	.probe          = vf610_adc_probe,
> -	.remove         = vf610_adc_remove,
>  	.driver         = {
>  		.name   = DRIVER_NAME,
>  		.of_match_table = vf610_adc_match,
> --
> 2.34.1
>




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux