Hi Claudiu,
On 03/12/2024 11:13, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> All Renesas SoCs using the rzg2l_adc driver manage ADC clocks through PM
> domains. Calling pm_runtime_{resume_and_get, put_sync}() implicitly sets
> the state of the clocks. As a result, the code in the rzg2l_adc driver that
> explicitly manages ADC clocks can be removed, leading to simpler and
> cleaner implementation.
>
> Additionally, replace the use of rzg2l_adc_set_power() with direct PM
> runtime API calls to further simplify and clean up the code.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
> drivers/iio/adc/rzg2l_adc.c | 100 ++++++++----------------------------
> 1 file changed, 20 insertions(+), 80 deletions(-)
>
> diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
> index 7039949a7554..a17690ecbdc3 100644
> --- a/drivers/iio/adc/rzg2l_adc.c
> +++ b/drivers/iio/adc/rzg2l_adc.c
> @@ -8,7 +8,6 @@
> */
>
> #include <linux/bitfield.h>
> -#include <linux/clk.h>
> #include <linux/completion.h>
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> @@ -69,8 +68,6 @@ struct rzg2l_adc_data {
>
> struct rzg2l_adc {
> void __iomem *base;
> - struct clk *pclk;
> - struct clk *adclk;
> struct reset_control *presetn;
> struct reset_control *adrstn;
> struct completion completion;
> @@ -188,29 +185,18 @@ static int rzg2l_adc_conversion_setup(struct rzg2l_adc *adc, u8 ch)
> return 0;
> }
>
> -static int rzg2l_adc_set_power(struct iio_dev *indio_dev, bool on)
> -{
> - struct device *dev = indio_dev->dev.parent;
> -
> - if (on)
> - return pm_runtime_resume_and_get(dev);
> -
> - return pm_runtime_put_sync(dev);
> -}
> -
> static int rzg2l_adc_conversion(struct iio_dev *indio_dev, struct rzg2l_adc *adc, u8 ch)
> {
> + struct device *dev = indio_dev->dev.parent;
> int ret;
>
> - ret = rzg2l_adc_set_power(indio_dev, true);
> + ret = pm_runtime_resume_and_get(dev);
> if (ret)
> return ret;
Should we check (ret < 0) here instead of just (ret)? According to the
docs [1], pm_runtime_resume_and_get() can return 1 if the device is
already active.
[1]: https://docs.kernel.org/power/runtime_pm.html#runtime-pm-device-helper-functions
Thanks,
--
Paul BarkerAttachment:
OpenPGP_0x27F4B3459F002257.asc
Description: OpenPGP public key
Attachment:
OpenPGP_signature.asc
Description: OpenPGP digital signature
