From: Jakob Hauser <jahau@xxxxxxxxxxxxxx> > Sent: 26 November 2024 23:40 > > In the function yas537_measure() there is a clamp_val() with limits of > -BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The BIT() > is of type unsigned long integer due to its define in include/vdso/bits.h. > The lower limit -BIT(13) is recognized as -8192 but expressed as an unsigned > long integer. The size of an unsigned long integer differs between 32-bit and > 64-bit architectures. Converting this to type s32 may lead to undesired > behavior. I think you also need to say that the unsigned divide generates erronous values on 32bit systems and that the clamp() call result is ignored. > > Declaring a signed integer with a value of BIT(13) allows to use it more > specifically as a negative value on the lower clamp limit. > > While at it, replace all BIT(13) in the function yas537_measure() by the signed > integer. > > Reported-by: kernel test robot <lkp@xxxxxxxxx> > Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@xxxxxxxxx/ > Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant") > Cc: David Laight <david.laight@xxxxxxxxxx> > Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx> > --- > The patch is based on torvalds/linux v6.12. > > The calculation lines h[0], h[1] and h[2] exceed the limit of 80 characters per > line. In terms of readability I would prefer to keep it that way. > --- > drivers/iio/magnetometer/yamaha-yas530.c | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c > index 65011a8598d3..938b35536e0d 100644 > --- a/drivers/iio/magnetometer/yamaha-yas530.c > +++ b/drivers/iio/magnetometer/yamaha-yas530.c > @@ -372,6 +372,7 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y > u8 data[8]; > u16 xy1y2[3]; > s32 h[3], s[3]; > + int half_range = BIT(13); > int i, ret; > > mutex_lock(&yas5xx->lock); > @@ -406,13 +407,13 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y > /* The second version of YAS537 needs to include calibration coefficients */ > if (yas5xx->version == YAS537_VERSION_1) { > for (i = 0; i < 3; i++) > - s[i] = xy1y2[i] - BIT(13); > - h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13); > - h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13); > - h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13); > + s[i] = xy1y2[i] - half_range; > + h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / half_range; > + h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / half_range; > + h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / half_range; > for (i = 0; i < 3; i++) { > - clamp_val(h[i], -BIT(13), BIT(13) - 1); > - xy1y2[i] = h[i] + BIT(13); > + clamp_val(h[i], -half_range, half_range - 1); > + xy1y2[i] = h[i] + half_range; NAK - that still ignores the result of clamp. and it should be clamp() not clamp_val(). David > } > } > > -- > 2.43.0 - Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
