On Fri, Nov 22, 2024 at 04:15:35PM +0100, Tobias Sperling wrote: > This patch series adds support for Texas Instruments ADS7128 and > ADS7138, which are 12-bit, 8 channel analog-to-digital converters (ADCs) > with build-in digital window comparator (DWC), using the I2C interface. > > The driver exposes the interfaces to read the raw values, as well as the > minimum and maximum value for each channel. In addition several settings > can be configured, like the DWC, sampling frequency or an averaging > filter/oversampling. Interrupts triggered by the DWC, if configured, are > then exposed as IIO events. > > ADS7128 differs in the addition of further hardware features, like a > root-mean-square (RMS) and a zero-crossing-detect (ZCD) module, which > are not yet supported by the driver. > > Regarding the I2C interface the chips using opcodes to define the way > how the registeres are accessed, like single or multiple register(s) > read/write or setting/clearing only bits. > > Changes in v1: > - dt-bindings: Extended description Hm? Everything starts from v1. Try - run: b4 diff 20241122-adc_ml-v1-0-0769f2e1bbc1@xxxxxxxxxxx Best regards, Krzysztof
