Jonathan Cameron <jic23@xxxxxxxxxx> writes: > On Fri, 18 Oct 2024 17:57:32 +0300 > Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote: > >> The commits in question do not proove that ACPI IDs exist. >> Quite likely it was a cargo cult addition while doing that >> for DT-based enumeration. Drop most likely fake ACPI IDs. >> >> The to be removed IDs has been checked against the following resources: >> 1) DuckDuckGo >> 2) Google >> 3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx >> This gives no useful results in regard to DSDT, moreover, the official >> vendor IDs in the registry for Bosh are BSG and BOSC. >> > > I'm nervous about Bosch drivers in the wild given recent report > from Justin > https://lore.kernel.org/linux-iio/87jzeboi3g.fsf@xxxxxxxxxxxxxxx/ > > Justin, I couldn't find the driver you were referring to for the bmi160, > is it online somewhere? Yes, the BMI160/260 Windows driver is on this page: https://ayaneo.com/support/download It's at the very bottom, under "AYANEO Universal Gyro Driver." GPD also has a copy inside their driver pack under the "Drivers & BIOS" tab here: https://www.gpd.hk/gpdwinminifirmwaredriver, but the download is often at capacity unless you're signed into Google. > Also if you have other bosch drivers could you check for these + bmc150 > IDs Andy is proposing dropping in: > > https://lore.kernel.org/linux-iio/20241018145805.2181682-1-andriy.shevchenko@xxxxxxxxxxxxxxx/ Unfortunately, the 160/260 driver is the only one I have. I wanted gyro support in Linux for a handheld PC I bought, and it was the IMU that happened to be inside. Justin > >> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> >> --- >> drivers/iio/gyro/bmg160_i2c.c | 2 -- >> 1 file changed, 2 deletions(-) >> >> diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c >> index 672d0b720f61..a81814df5205 100644 >> --- a/drivers/iio/gyro/bmg160_i2c.c >> +++ b/drivers/iio/gyro/bmg160_i2c.c >> @@ -39,8 +39,6 @@ static void bmg160_i2c_remove(struct i2c_client *client) >> >> static const struct acpi_device_id bmg160_acpi_match[] = { >> {"BMG0160", 0}, >> - {"BMI055B", 0}, >> - {"BMI088B", 0}, >> {}, >> }; >>
