Re: [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15.10.2024 08:11, Nuno Sá wrote:
> On Mon, 2024-10-14 at 16:16 -0500, David Lechner wrote:
> > On 10/14/24 5:08 AM, Angelo Dureghello wrote:
> > > From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> > > 
> > > Change to obtain the fdt use case as reported in the
> > > adi,ad3552r.yaml file in this patchset.
> > > 
> > > The DAC device is defined as a child node of the backend.
> > > Registering the child fdt node as a platform devices.
> > > 
> > > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> > > ---
> > >  drivers/iio/dac/adi-axi-dac.c | 53 +++++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 53 insertions(+)
> > > 
> > > diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c
> > > index b887c6343f96..f85e3138d428 100644
> > > --- a/drivers/iio/dac/adi-axi-dac.c
> > > +++ b/drivers/iio/dac/adi-axi-dac.c
> > > @@ -29,6 +29,8 @@
> > >  #include <linux/iio/buffer.h>
> > >  #include <linux/iio/iio.h>
> > >  
> > > +#include "ad3552r-hs.h"
> > > +
> > >  /*
> > >   * Register definitions:
> > >   *   https://wiki.analog.com/resources/fpga/docs/axi_dac_ip#register_map
> > > @@ -738,6 +740,39 @@ static int axi_dac_bus_reg_read(struct iio_backend *back,
> > > u32 reg, u32 *val,
> > >  	return regmap_read(st->regmap, AXI_DAC_CUSTOM_RD_REG, val);
> > >  }
> > >  
> > > +static void axi_dac_child_remove(void *data)
> > > +{
> > > +	struct platform_device *pdev = data;
> > > +
> > > +	platform_device_unregister(pdev);
> 
> Just do platform_device_unregister(data)... Or call the argument pdev for better
> readability...
> 
> > > +}
> > > +
> > > +static int axi_dac_create_platform_device(struct axi_dac_state *st,
> > > +					  struct fwnode_handle *child)
> > > +{
> > > +	struct ad3552r_hs_platform_data pdata = {
> > > +		.bus_reg_read = axi_dac_bus_reg_read,
> > > +		.bus_reg_write = axi_dac_bus_reg_write,
> > > +	};
> > > +	struct platform_device_info pi = {
> > > +		.parent = st->dev,
> > > +		.name = fwnode_get_name(child),
> > > +		.id = PLATFORM_DEVID_AUTO,
> > > +		.fwnode = child,
> > > +		.data = &pdata,
> > > +		.size_data = sizeof(pdata),
> > > +	};
> > > +	struct platform_device *pdev;
> > > +
> > > +	pdev = platform_device_register_full(&pi);
> > > +	if (IS_ERR(pdev))
> > > +		return PTR_ERR(pdev);
> > > +
> > > +	device_set_node(&pdev->dev, child);
> > 
> > Not sure why Nuno suggested adding device_set_node(). It is
> > redundant since platform_device_register_full() already does
> > the same thing.
> > 
> 
> Indeed... I realized that yesterday when (actually) looking at
> platform_device_register_full(). You just beat me in replying to the email. Sorry for
> the noise...
> 
> > (And setting it after platform_device_register_full() would
> > be too late anyway since drivers may have already probed.)
> 
> > > +
> > > +	return devm_add_action_or_reset(st->dev, axi_dac_child_remove, pdev);
> > > +}
> > > +
> > >  static const struct iio_backend_ops axi_dac_generic_ops = {
> > >  	.enable = axi_dac_enable,
> > >  	.disable = axi_dac_disable,
> > > @@ -874,6 +909,24 @@ static int axi_dac_probe(struct platform_device *pdev)
> > >  		return dev_err_probe(&pdev->dev, ret,
> > >  				     "failed to register iio backend\n");
> > >  
> > > +	device_for_each_child_node_scoped(&pdev->dev, child) {
> > > +		int val;
> > > +
> 
> I'm starting to come around again if some sort of flag (bus_controller or an explicit
> has_child) wouldn't make sense (since you may need to re-spin another version). So we
> could error out in case someone comes up with child nodes on a device that does not
> support them. 
> 

For this, i added a check on io-backend here, that has been asked
to be removed.

Without adding other flags, i may use has_dac_clk, could it be ok ?

> Anyways, I'll leave this up to you and maybe others can also argue about this...
> 
> > > +		/* Processing only reg 0 node */
> > > +		ret = fwnode_property_read_u32(child, "reg", &val);
> > > +		if (ret)
> > > +			return dev_err_probe(&pdev->dev, ret,
> > > +						"child node missing.");
> > 
> > Shouldn't the error message say that there is a problem with the reg
> > property? We already have a handle to the child node, so the child node
> > isn't missing.
> 
> Makes sense... like "reg property missing" - something on those lines.
> 
> - Nuno Sá
> 
> 
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux