On Mon, 14 Oct 2024 12:08:08 +0200, Angelo Dureghello wrote: > From: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > > Add a new compatible and related bindigns for the fpga-based > "ad3552r" AXI IP core, a variant of the generic AXI DAC IP. > > The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the > generic AXI "DAC" IP, intended to control ad3552r and similar chips, > mainly to reach high speed transfer rates using a QSPI DDR > (dobule-data-rate) interface. > > The ad3552r device is defined as a child of the AXI DAC, that in > this case is acting as an SPI controller. > > Note, #io-backend is present because it is possible (in theory anyway) > to use a separate controller for the control path than that used > for the datapath. > > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > --- > .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 56 ++++++++++++++++++++-- > 1 file changed, 53 insertions(+), 3 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.example.dtb: dac@0: spi-max-frequency: 66000000 is greater than the maximum of 30000000 from schema $id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241014-wip-bl-ad3552r-axi-v0-iio-testing-v6-2-eeef0c1e0e56@xxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
