[PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>

Refactorize the set_mode() function to use an external enum that
describes the possible modes of the BME680 device instead of using
true/false variables for selecting SLEEPING/FORCED mode.

Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
---
 drivers/iio/chemical/bme680_core.c | 36 ++++++++++++++++--------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 9e843e463502..dedb7edaf43d 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -95,6 +95,11 @@ struct bme680_calib {
 	s8  range_sw_err;
 };
 
+enum bme680_op_mode {
+	BME680_SLEEP,
+	BME680_FORCED,
+};
+
 struct bme680_data {
 	struct regmap *regmap;
 	struct bme680_calib bme680;
@@ -501,25 +506,24 @@ static u8 bme680_calc_heater_dur(u16 dur)
 	return durval;
 }
 
-static int bme680_set_mode(struct bme680_data *data, bool mode)
+static int bme680_set_mode(struct bme680_data *data, enum bme680_op_mode mode)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
 
-	if (mode) {
-		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
-					BME680_MODE_MASK, BME680_MODE_FORCED);
-		if (ret < 0)
-			dev_err(dev, "failed to set forced mode\n");
-
-	} else {
-		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
-					BME680_MODE_MASK, BME680_MODE_SLEEP);
-		if (ret < 0)
-			dev_err(dev, "failed to set sleep mode\n");
-
+	switch (mode) {
+	case BME680_SLEEP:
+	case BME680_FORCED:
+		break;
+	default:
+		return -EINVAL;
 	}
 
+	ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+				BME680_MODE_MASK, mode);
+	if (ret < 0)
+		dev_err(dev, "failed to set ctrl_meas register\n");
+
 	return ret;
 }
 
@@ -612,8 +616,7 @@ static int bme680_gas_config(struct bme680_data *data)
 	int ret;
 	u8 heatr_res, heatr_dur;
 
-	/* Go to sleep */
-	ret = bme680_set_mode(data, false);
+	ret = bme680_set_mode(data, BME680_SLEEP);
 	if (ret < 0)
 		return ret;
 
@@ -750,8 +753,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
 
 	guard(mutex)(&data->lock);
 
-	/* set forced mode to trigger measurement */
-	ret = bme680_set_mode(data, true);
+	ret = bme680_set_mode(data, BME680_FORCED);
 	if (ret < 0)
 		return ret;
 
-- 
2.43.0





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux