The commit adds a check for the sensor's model ID. We read the model
identification register (0xC0) and expect a value of 0xEE.
Signed-off-by: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
---
drivers/iio/proximity/vl53l0x-i2c.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
index 8d4f3f849..3f416d3db 100644
--- a/drivers/iio/proximity/vl53l0x-i2c.c
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -39,8 +39,11 @@
#define VL_REG_RESULT_INT_STATUS 0x13
#define VL_REG_RESULT_RANGE_STATUS 0x14
+#define VL_REG_IDENTIFICATION_MODEL_ID 0xC0
#define VL_REG_RESULT_RANGE_STATUS_COMPLETE BIT(0)
+#define VL53L0X_MODEL_ID_VAL 0xEE
+
struct vl53l0x_data {
struct i2c_client *client;
struct completion completion;
@@ -223,6 +226,7 @@ static int vl53l0x_probe(struct i2c_client *client)
struct vl53l0x_data *data;
struct iio_dev *indio_dev;
int error;
+ int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
@@ -237,6 +241,13 @@ static int vl53l0x_probe(struct i2c_client *client)
I2C_FUNC_SMBUS_BYTE_DATA))
return -EOPNOTSUPP;
+ ret = i2c_smbus_read_byte_data(data->client, VL_REG_IDENTIFICATION_MODEL_ID);
+ if (ret < 0)
+ return -EINVAL;
+
+ if (ret != VL53L0X_MODEL_ID_VAL)
+ dev_info(&client->dev, "Unknown model id: 0x%x", ret);
+
data->vdd_supply = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_supply))
return dev_err_probe(&client->dev, PTR_ERR(data->vdd_supply),
@@ -265,8 +276,6 @@ static int vl53l0x_probe(struct i2c_client *client)
/* usage of interrupt is optional */
if (client->irq) {
- int ret;
-
init_completion(&data->completion);
ret = vl53l0x_configure_irq(client, indio_dev);
--
2.43.0
