On Mon, 9 Sep 2024 06:43:47 +0000
jason liu <jasonliu10041728@xxxxxxxxx> wrote:
> Hi Jonathan,
>
> > Hi Jason,
>
> > I've picked this up, but the patch submission has a number of issues
> > you should be sure to fix in future patches.
> >
> I am sorry for the issues, and I will keep your suggestions in mind.
> So, do I still need to submit a new patch to fix these issues?
No need,.
> My understanding is that since you've picked it up, there's no need for me to resubmit.
> Is it right?
Yes that's right.
>
> > I haven't treated this as a fix because it was never there, but
> > it may make sense to request a backport to stable after it is upstream.
> >
> Sorry, I didn’t quite understand what you meant.
> Why did you say 'it was never there'? Do you mean that this issue doesn't exist?
The autoprobing never worked, hence this is an improvement not a regression.
As such I've not rushed it in as a fix, but instead it can take a slower
path upstream.
Jonathan
>
> Thanks,
>
> Jason
>
> ________________________________________
> From: Jonathan Cameron <jic23@xxxxxxxxxx>
> Sent: Sunday, September 8, 2024 6:51 PM
> To: jason liu
> Cc: Jean-Baptiste Maneyrol; lars@xxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
>
> On Fri, 6 Sep 2024 05:02:59 +0000
> jason liu <jasonliu10041728@xxxxxxxxx> wrote:
>
> > Hello,
> >
> > I'm glad this patch could help. And I would like to know, how will the patch to be handled moving forward?
> >
> It is queued up on the IIO tree. Given timing it's queued for 6.13.
> Note that for now that is only pushed out as testing because I will
> be rebasing the IIO togreg branch on 6.12-rc1.
> One that is done it will appear in linux-next.
>
> It should go upstream and appear in char-misc/char-misc-next
> in about 6 weeks. After that Greg KH will send a pull request during
> the 6.13 merge window in about 12 weeks time and it will then hopefully
> get merged into Linus' tree before 6.13-rc1
>
> I haven't treated this as a fix because it was never there, but
> it may make sense to request a backport to stable after it is upstream.
>
> Thanks,
>
> Jonathan
>
> > Thanks.
> >
> > ________________________________
> > From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
> > Sent: Thursday, September 5, 2024 5:25 PM
> > To: jason liu <jasonliu10041728@xxxxxxxxx>
> > Cc: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; lars@xxxxxxxxxx <lars@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>
> > Subject: Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
> >
> > Hello,
> >
> > looks good for me now, thanks for the patch.
> >
> > Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
> >
> > Thanks,
> > JB
> >
> > ________________________________________
> > From: jason liu <jasonliu10041728@xxxxxxxxx>
> > Sent: Wednesday, September 4, 2024 11:00
> > To: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
> > Cc: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; lars@xxxxxxxxxx <lars@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>
> > Subject: Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
> >
> > This Message Is From an Untrusted Sender
> > You have not previously corresponded with this sender.
> >
> > Hello, does patch v3 meet the requirements?
> >
> > BR.
> >
> > Jason Liu <jasonliu10041728@xxxxxxxxx> 于2024年9月2日周一 19:31写道：
> > Add the id_table of inv_icm42600, so the device can probe correctly.
> >
> > Signed-off-by: Jason Liu <jasonliu10041728@xxxxxxxxx>
> > ---
> > V1->V2: fix up the formatting as requested
> > ---
> > V2->V3: add icm42686 (INV_ICM_42686) and icm42688 (INV_ICM_42688)
> > ---
> > drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 17 +++++++++++++++++
> > drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 17 +++++++++++++++++
> > 2 files changed, 34 insertions(+)
> >
> > diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> > index ebb31b385881..9e65fef04c39 100644
> > --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> > +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> > @@ -71,6 +71,22 @@ static int inv_icm42600_probe(struct i2c_client *client)
> > inv_icm42600_i2c_bus_setup);
> > }
> >
> > +/*
> > + * device id table is used to identify what device can be
> > + * supported by this driver
> > + */
> > +static const struct i2c_device_id inv_icm42600_id[] = {
> > + { "icm42600", INV_CHIP_ICM42600 },
> > + { "icm42602", INV_CHIP_ICM42602 },
> > + { "icm42605", INV_CHIP_ICM42605 },
> > + { "icm42686", INV_CHIP_ICM42686 },
> > + { "icm42622", INV_CHIP_ICM42622 },
> > + { "icm42688", INV_CHIP_ICM42688 },
> > + { "icm42631", INV_CHIP_ICM42631 },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, inv_icm42600_id);
> > +
> > static const struct of_device_id inv_icm42600_of_matches[] = {
> > {
> > .compatible = "invensense,icm42600",
> > @@ -104,6 +120,7 @@ static struct i2c_driver inv_icm42600_driver = {
> > .of_match_table = inv_icm42600_of_matches,
> > .pm = pm_ptr(&inv_icm42600_pm_ops),
> > },
> > + .id_table = inv_icm42600_id,
> > .probe = inv_icm42600_probe,
> > };
> > module_i2c_driver(inv_icm42600_driver);
> > diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> > index eae5ff7a3cc1..75441b2be174 100644
> > --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> > +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> > @@ -67,6 +67,22 @@ static int inv_icm42600_probe(struct spi_device *spi)
> > inv_icm42600_spi_bus_setup);
> > }
> >
> > +/*
> > + * device id table is used to identify what device can be
> > + * supported by this driver
> > + */
> > +static const struct spi_device_id inv_icm42600_id[] = {
> > + { "icm42600", INV_CHIP_ICM42600 },
> > + { "icm42602", INV_CHIP_ICM42602 },
> > + { "icm42605", INV_CHIP_ICM42605 },
> > + { "icm42686", INV_CHIP_ICM42686 },
> > + { "icm42622", INV_CHIP_ICM42622 },
> > + { "icm42688", INV_CHIP_ICM42688 },
> > + { "icm42631", INV_CHIP_ICM42631 },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(spi, inv_icm42600_id);
> > +
> > static const struct of_device_id inv_icm42600_of_matches[] = {
> > {
> > .compatible = "invensense,icm42600",
> > @@ -100,6 +116,7 @@ static struct spi_driver inv_icm42600_driver = {
> > .of_match_table = inv_icm42600_of_matches,
> > .pm = pm_ptr(&inv_icm42600_pm_ops),
> > },
> > + .id_table = inv_icm42600_id,
> > .probe = inv_icm42600_probe,
> > };
> > module_spi_driver(inv_icm42600_driver);
> > --
> > 2.25.1
>
