Re: [PATCH V4 00/15] Add Battery and USB Supply for AXP717

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 21 Aug 2024 16:54:41 -0500
Chris Morgan <macroalpha82@xxxxxxxxx> wrote:

> From: Chris Morgan <macromorgan@xxxxxxxxxxx>
> 
> Add support for monitoring the USB charger and battery charger on the
> AXP717 PMIC. This required some driver refactoring of the axp20x USB
> and battery charger as the AXP717 is somewhat different but can still
> benefit from some common elements.
> 
> Note that as of now the charging current now value may be incorrect as
> the scale and offsets were not documented in the datasheet. I suspect
> the scale is 1 and the offset is somewhere around 450mA though.
Applied 1, 8 and 12 to the IIO togreg branch.

I was waiting for some mess related to my tree to pan out upstream.
Unfortunately that leaves us rather tight on timing for the coming
merge window but hopefully Greg will take a last minute pull request
for char-misc.

Jonathan

> 
> Changes from V3:
>  - Remove accidental AXP717_BOOST regulator in header file, as it is
>    not part of this patch series.
>  - Add an absolute min/max constraint for input-current-limit-microamp
>    in device tree documentation.
>  - Correct an issue found by kernel test robot <lkp@xxxxxxxxx> by
>    explicitly adding linux/bitfield.h include. Details here:
>    https://lore.kernel.org/oe-kbuild-all/202408201228.Hee4eSYl-lkp@xxxxxxxxx/
> 
> Changes from V2:
>  - Added constraints for input-current-limit-microamp constraints for
>    x-powers,axp20x-usb-power-supply.yaml.
>  - Used FIELD_GET() and removed unnecessary -EINVAL per comments from
>    Jonathan Cameron.
> 
> Changes from V1:
>  - Refactored against mainline to remove BOOST pre-requisite.
>  - Corrected commit subjects for DT bindings.
>  - Split refactoring and AXP717 support into different patches.
>  - Added IRQ for VBUS over voltage. There appears to be a bug
>    with the VBUS fault IRQ because it is assigned IRQ num 0.
>  - Corrected battery driver to report POWER_SUPPLY_PROP_VOLTAGE_MIN
>    and POWER_SUPPLY_PROP_VOLTAGE_MAX instead of *_DESIGN.
> 
> 
> Chris Morgan (15):
>   iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
>   power: supply: axp20x_battery: Remove design from min and max voltage
>   power: supply: axp20x_battery: Make iio and battery config per device
>   power: supply: axp20x_usb_power: Make VBUS and IIO config per device
>   dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
>   power: supply: axp20x_usb_power: add input-current-limit-microamp
>   dt-bindings: power: supply: axp20x-battery: Add monitored-battery
>   dt-bindings: iio: adc: Add AXP717 compatible
>   dt-bindings: power: supply: axp20x: Add AXP717 compatible
>   dt-bindings: power: supply: axp20x: Add AXP717 compatible
>   mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
>   iio: adc: axp20x_adc: add support for AXP717 ADC
>   power: supply: axp20x_usb_power: Add support for AXP717
>   power: supply: axp20x_battery: add support for AXP717
>   arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
> 
>  .../bindings/iio/adc/x-powers,axp209-adc.yaml |  12 +
>  .../x-powers,axp20x-battery-power-supply.yaml |   7 +
>  .../x-powers,axp20x-usb-power-supply.yaml     |  72 ++-
>  .../sun50i-h700-anbernic-rg35xx-2024.dts      |  21 +
>  drivers/iio/adc/axp20x_adc.c                  | 182 +++++-
>  drivers/mfd/axp20x.c                          |  25 +-
>  drivers/power/supply/axp20x_battery.c         | 591 ++++++++++++++++--
>  drivers/power/supply/axp20x_usb_power.c       | 353 ++++++++++-
>  include/linux/mfd/axp20x.h                    |  26 +
>  9 files changed, 1188 insertions(+), 101 deletions(-)
> 





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux