Re: [PATCH v2 1/3] iio: magnetometer: ak8975: Fix reading for ak099xx sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 06 Aug 2024 19:54:56 +0200
Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx> wrote:

> On August 6, 2024 6:19:25 PM GMT+02:00, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> >On Tue, 06 Aug 2024 08:10:18 +0200
> >Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx> wrote:
> >
> >Hi Barnabás,
> >
> >Welcome to IIO.
> >  
> >> ST2 register read should be placed after read measurment data,
> >> because it will get correct values after it.  
> >
> >What is the user visible result of this? Do we detect errors when none
> >are there?  Do we have a datasheet reference for the status being
> >update on the read command, not after the trigger?  
> 
> Second read will fail. In the datasheet ST2 comes after measurment data read. Here is some explanation from datasheet.
> 
> "When ST2 register is read, AK09918 judges that data reading is finished. Stored measurement data is
> protected during data reading and data is not updated. By reading ST2 register, this protection is
> released. It is required to read ST2 register after data reading."
> 
Thanks. Please add more of that detail to the patch description for v3.

> So if ST2 is read before measurment it will stuck at protected mode.
> >>  
> >Needs a Fixes tag to let us know how far to backport the fix.  
> I think it is broken since 09912 was added but i cannot verify i have only devices with 09918.
> >
I wasn't meaning devices, but rather what patch broke the kernel code.
It might be the original driver introduction.

If we can add a Fixes tag that makes it much easier for stable + distributions
to work out whether to pick the fix up or not.





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux