On Wed, 7 Aug 2024 20:56:17 +0200 Denis Benato <benato.denis96@xxxxxxxxx> wrote: > When a device enters an idle state (for example ASUS RC71L with s2idle) > and an iio driver has a trigger attached such as iio-trig-hrtimer, > after resuming the device the trigger is not triggering data acquisition. > > This patch series solves the problem reliably and is well tested after > many cycles and many reboots. > > Closes: https://lore.kernel.org/all/31d7f7aa-e834-4fd0-a66a-e0ff528425dc@xxxxxxxxx/ > > Changelog: > - V2: patch 2: > + Simplify code > + Remove unneeded code protections around SET_RUNTIME_PM_OPS() > + pm_ptr() to let the compiler drop bmi323_core_pm_ops if !CONFIG_PM > > - V3: patch 1: > + Add pf->irq=0 that was accidentally left out Dropped v2 and picked up v3. Thanks, Jonathan > > Previous patches obsoleted: > https://lore.kernel.org/all/20240727123034.5541-1-benato.denis96@xxxxxxxxx/ > https://lore.kernel.org/all/20240725002641.191509-3-benato.denis96@xxxxxxxxx/ > > Denis Benato (2): > iio: trigger: allow devices to suspend/resume theirs associated > trigger > iio: bmi323: suspend and resume triggering on relevant pm operations > > drivers/iio/imu/bmi323/bmi323.h | 1 + > drivers/iio/imu/bmi323/bmi323_core.c | 23 +++++++++++++++++++++++ > drivers/iio/imu/bmi323/bmi323_i2c.c | 1 + > drivers/iio/imu/bmi323/bmi323_spi.c | 1 + > drivers/iio/industrialio-trigger.c | 27 +++++++++++++++++++++++++++ > include/linux/iio/iio.h | 17 +++++++++++++++++ > 6 files changed, 70 insertions(+) >
