The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.
Fix by moving the cfg pointer setting after reading the channel number.
Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx>
---
drivers/iio/adc/ad7124.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 3beed78496c5..672d41bac8ca 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -839,8 +839,6 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
st->channels = channels;
device_for_each_child_node_scoped(dev, child) {
- cfg = &st->channels[channel].cfg;
-
ret = fwnode_property_read_u32(child, "reg", &channel);
if (ret)
return ret;
@@ -858,6 +856,7 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
AD7124_CHANNEL_AINM(ain[1]);
+ cfg = &st->channels[channel].cfg;
cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
--
2.43.0
