On Thu, 01 Aug 2024 08:13:52 +0200 Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> wrote: > Use `device_for_each_child_node_scoped()` in `ams_parse_firmware()` > to explicitly state device child node access, and simplify the child > node handling as it is not required outside the loop. > > Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> > --- > drivers/iio/adc/xilinx-ams.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c > index f051358d6b50..27d5e4a6f9d6 100644 > --- a/drivers/iio/adc/xilinx-ams.c > +++ b/drivers/iio/adc/xilinx-ams.c > @@ -1275,7 +1275,6 @@ static int ams_parse_firmware(struct iio_dev *indio_dev) > struct ams *ams = iio_priv(indio_dev); > struct iio_chan_spec *ams_channels, *dev_channels; > struct device *dev = indio_dev->dev.parent; > - struct fwnode_handle *child = NULL; > struct fwnode_handle *fwnode = dev_fwnode(dev); > size_t ams_size; > int ret, ch_cnt = 0, i, rising_off, falling_off; > @@ -1297,13 +1296,11 @@ static int ams_parse_firmware(struct iio_dev *indio_dev) > num_channels += ret; > } > > - fwnode_for_each_child_node(fwnode, child) { > + device_for_each_child_node_scoped(dev, child) { > if (fwnode_device_is_available(child)) { This is fun. should have been fwnode_for_each_available_child_node() in the first place rather than iterating over all nodes, and only doing stuff for the available ones. Can use the device_for_each_child_node_scoped() but that only includes available nodes anyway, so my understanding is that we can also drop this if statement as it will always be true. > ret = ams_init_module(indio_dev, child, ams_channels + num_channels); > - if (ret < 0) { > - fwnode_handle_put(child); > + if (ret < 0) > return ret; > - } > > num_channels += ret; > } >