The AD7380 family has some compatible single-ended chips: AD7386/7/8(-4). These single-ended chips have a 2:1 multiplexer in front of each ADC. They also include additional configuration registers that allow for either manual selection or automatic switching (sequencer mode), of the multiplexer inputs. Add a section to describe this. Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx> --- Documentation/iio/ad7380.rst | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/Documentation/iio/ad7380.rst b/Documentation/iio/ad7380.rst index 061cd632b5df..81dfa39519fb 100644 --- a/Documentation/iio/ad7380.rst +++ b/Documentation/iio/ad7380.rst @@ -17,10 +17,16 @@ The following chips are supported by this driver: * `AD7381 <https://www.analog.com/en/products/ad7381.html>`_ * `AD7383 <https://www.analog.com/en/products/ad7383.html>`_ * `AD7384 <https://www.analog.com/en/products/ad7384.html>`_ +* `AD7386 <https://www.analog.com/en/products/ad7386.html>`_ +* `AD7387 <https://www.analog.com/en/products/ad7387.html>`_ +* `AD7388 <https://www.analog.com/en/products/ad7388.html>`_ * `AD7380-4 <https://www.analog.com/en/products/ad7380-4.html>`_ * `AD7381-4 <https://www.analog.com/en/products/ad7381-4.html>`_ * `AD7383-4 <https://www.analog.com/en/products/ad7383-4.html>`_ * `AD7384-4 <https://www.analog.com/en/products/ad7384-4.html>`_ +* `AD7386-4 <https://www.analog.com/en/products/ad7386-4.html>`_ +* `AD7387-4 <https://www.analog.com/en/products/ad7387-4.html>`_ +* `AD7388-4 <https://www.analog.com/en/products/ad7388-4.html>`_ Supported features @@ -69,6 +75,42 @@ must restart iiod using the following command: root:~# systemctl restart iiod +Channel selection and sequencer (single-end chips only) +------------------------------------------------------- + +Single-ended chips of this family (ad7386/7/8(-4)) have a 2:1 multiplexer in +front of each ADC. They also include additional configuration registers that +allow for either manual selection or automatic switching (sequencer mode),of the +multiplexer inputs. + +From an IIO point of view, all inputs are exported, i.e ad7386/7/8 +export 4 channels and ad7386-4/7-4/8-4 export 8 channels. + +Inputs ``AinX0`` of multiplexers correspond to the first half of IIO channels (i.e +0-1 or 0-3) and inputs ``AinX1`` correspond to second half (i.e 2-3 or 4-7). +Example for AD7386/7/8 (2 channels parts): + +.. code-block:: + + IIO | AD7386/7/8 + | +---------------------------- + | | _____ ______ + | | | | | | + voltage0 | AinA0 --|--->| | | | + | | | mux |----->| ADCA |--- + voltage2 | AinA1 --|--->| | | | + | | |_____| |_____ | + | | _____ ______ + | | | | | | + voltage1 | AinB0 --|--->| | | | + | | | mux |----->| ADCB |--- + voltage3 | AinB1 --|--->| | | | + | | |_____| |______| + | | + | +---------------------------- + + +When enabling sequencer mode, the effective sampling rate is divided by two. Unimplemented features ---------------------- -- 2.45.1
