Hi David, Thank you very much for cleaning up the code. On Fri, 2024-07-12 at 11:03 -0500, David Lechner wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you > know the content is safe > > This makes use of the new devm_regulator_get_enable_read_voltage() > helper function to reduce boilerplate code in the MCP3564 ADC driver. > > The error message is slightly changed since there are fewer error > return paths. > > Setting adc->vref_mv is consolidated into a single place to make the > logic easier to follow. > > A use_auto_zeroing_ref_attr local variable is added to make it more > obvious what the difference between the two iio info structures is. > Can we use another name here, instead of "use_auto_zeroing_ref_attr" to use something like "use_internal_vref_attr". It could be misleading because the difference between the two part numbers is related to having or not having the internal voltage reference. If the part has voltage reference (with the R at the end) and the user want's to use it, there is an attribute to enable/disable in hardware the "auto_zeroing_ref". > The return value of the "Unknown Vref" dev_err_probe() is hard-coded > to > -ENODEV instead of ret since it was getting a bit far from where ret > was set and logically that is the only value it could have. > > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> > --- Best regards, Marius