[PATCH v7 5/7] dt-bindings: iio: adc: Add AD4000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree documentation for AD4000 series of ADC devices.

Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
---
No changes to device tree from v6 to v7.

 .../bindings/iio/adc/adi,ad4000.yaml          | 197 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 2 files changed, 204 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
new file mode 100644
index 000000000000..e413a9d8d2a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4000 and similar Analog to Digital Converters
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
+
+description: |
+  Analog Devices AD4000 family of Analog to Digital Converters with SPI support.
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,ad4000
+      - items:
+          - enum:
+              - adi,ad4004
+              - adi,ad4008
+          - const: adi,ad4000
+
+      - const: adi,ad4001
+      - items:
+          - enum:
+              - adi,ad4005
+          - const: adi,ad4001
+
+      - const: adi,ad4002
+      - items:
+          - enum:
+              - adi,ad4006
+              - adi,ad4010
+          - const: adi,ad4002
+
+      - const: adi,ad4003
+      - items:
+          - enum:
+              - adi,ad4007
+              - adi,ad4011
+          - const: adi,ad4003
+
+      - const: adi,ad4020
+      - items:
+          - enum:
+              - adi,ad4021
+              - adi,ad4022
+          - const: adi,ad4020
+
+      - const: adi,adaq4001
+
+      - const: adi,adaq4003
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V
+
+  adi,sdi-pin:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ high, low, cs, sdi ]
+    default: sdi
+    description:
+      Describes how the ADC SDI pin is wired. A value of "sdi" indicates that
+      the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI
+      pin is hard-wired to logic high (VIO). "low" indicates that it is
+      hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to
+      the host CS line.
+
+  '#daisy-chained-devices': true
+
+  vdd-supply:
+    description: A 1.8V supply that powers the chip (VDD).
+
+  vio-supply:
+    description:
+      A 1.8V to 5.5V supply for the digital inputs and outputs (VIO).
+
+  ref-supply:
+    description:
+      A 2.5 to 5V supply for the external reference voltage (REF).
+
+  cnv-gpios:
+    description:
+      When provided, this property indicates the GPIO that is connected to the
+      CNV pin.
+    maxItems: 1
+
+  adi,high-z-input:
+    type: boolean
+    description:
+      High-Z mode allows the amplifier and RC filter in front of the ADC to be
+      chosen based on the signal bandwidth of interest, rather than the settling
+      requirements of the switched capacitor SAR ADC inputs.
+
+  adi,gain-milli:
+    description: |
+      The hardware gain applied to the ADC input (in milli units).
+      The gain provided by the ADC input scaler is defined by the hardware
+      connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-.
+      If not present, default to 1000 (no actual gain applied).
+    $ref: /schemas/types.yaml#/definitions/uint16
+    enum: [454, 909, 1000, 1900]
+    default: 1000
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ("3-wire" mode) or the
+      SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+  - ref-supply
+
+allOf:
+  # The configuration register can only be accessed if SDI is connected to MOSI
+  - if:
+      required:
+        - adi,sdi-pin
+    then:
+      properties:
+        adi,high-z-input: false
+  # chain mode has lower SCLK max rate
+  - if:
+      required:
+        - '#daisy-chained-devices'
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V
+  # Gain property only applies to ADAQ devices
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,adaq4001
+                - adi,adaq4003
+    then:
+      properties:
+        adi,gain-milli: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad4020";
+            reg = <0>;
+            spi-max-frequency = <71000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,sdi-pin = "cs";
+            cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,adaq4003";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,high-z-input;
+            adi,gain-milli = /bits/ 16 <454>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 06ecfa64a39a..e03300d3ef13 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1199,6 +1199,13 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
 F:	drivers/iio/dac/ad3552r.c
 
+ANALOG DEVICES INC AD4000 DRIVER
+M:	Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
+L:	linux-iio@xxxxxxxxxxxxxxx
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
+
 ANALOG DEVICES INC AD4130 DRIVER
 M:	Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
 L:	linux-iio@xxxxxxxxxxxxxxx
-- 
2.43.0





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux