Add bindings support for the MBG Temp alarm peripheral found on pm8775 pmics. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx> --- .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml new file mode 100644 index 000000000000..9b6d1bc34a11 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SPMI PMIC MBG Thermal Monitoring + +maintainers: + - Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx> + +description: | + Qualcomm's thermal driver for the MBG thermal monitoring device. + +properties: + compatible: + const: qcom,spmi-mbg-tm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + io-channels: + description: + IIO channel specifier for the ADC channel, which reports + chip die temperature. + + io-channel-names: + const: thermal + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - io-channels + - io-channel-names + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h> + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + + pm8775_sail_1_tz: qcom,mbg-tm@d700 { + compatible = "qcom,spmi-mbg-tm"; + reg = <0xd700>; + interrupts = <0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8775_1_adc PM8775_ADC5_GEN3_DIE_TEMP(1)>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + }; +... -- 2.25.1
