Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215. The ENS21x is a family of high-performance temperature and relative humidity sensors with accuracies tailored to the needs of specific applications. From high volume consumer to automotive grade or highest accuracy demands in instrumentation, there is virtually no application, the ENS21x family cannot address. Encapsulated in a tiny QFN4 package, the devices feature an I2C interface to communicate with an external host processor. Moreover, the ENS21x family provides digital, pre- calibrated outputs (Kelvin and % relative humidity) and works well with ScioSense’s gas sensor portfolio. Signed-off-by: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx> --- drivers/iio/humidity/Kconfig | 10 + drivers/iio/humidity/Makefile | 1 + drivers/iio/humidity/ens21x.c | 348 ++++++++++++++++++++++++++++++++++ 3 files changed, 359 insertions(+) create mode 100644 drivers/iio/humidity/ens21x.c diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 2de5494e7c22..3b792ef10bde 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -98,6 +98,16 @@ config HTU21 This driver can also be built as a module. If so, the module will be called htu21. +config ENS21X + tristate "ENS21X temperature and humidity sensor" + depends on I2C + help + Say yes here to get support for the ScioSense ENS21X family of + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module will be + called ens21x. + config SI7005 tristate "SI7005 relative humidity and temperature sensor" depends on I2C diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile index f19ff3de97c5..2a90967673c1 100644 --- a/drivers/iio/humidity/Makefile +++ b/drivers/iio/humidity/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_HTS221_I2C) += hts221_i2c.o obj-$(CONFIG_HTS221_SPI) += hts221_spi.o obj-$(CONFIG_HTU21) += htu21.o +obj-$(CONFIG_ENS21X) += ens21x.o obj-$(CONFIG_SI7005) += si7005.o obj-$(CONFIG_SI7020) += si7020.o diff --git a/drivers/iio/humidity/ens21x.c b/drivers/iio/humidity/ens21x.c new file mode 100644 index 000000000000..62d3e4636dff --- /dev/null +++ b/drivers/iio/humidity/ens21x.c @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ens21x.c - Support for ScioSense ens21x + * temperature & humidity sensor + * + * (7-bit I2C slave address 0x43 ENS210) + * (7-bit I2C slave address 0x43 ENS210A) + * (7-bit I2C slave address 0x44 ENS211) + * (7-bit I2C slave address 0x45 ENS212) + * (7-bit I2C slave address 0x46 ENS213A) + * (7-bit I2C slave address 0x47 ENS215) + * + * Datasheet: + * https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf + * https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf + */ + +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/crc7.h> + +/* register definitions */ +#define ENS21X_REG_PART_ID 0x00 +#define ENS21X_REG_DIE_REV 0x02 +#define ENS21X_REG_UID 0x04 +#define ENS21X_REG_SYS_CTRL 0x10 +#define ENS21X_REG_SYS_STAT 0x11 +#define ENS21X_REG_SENS_RUN 0x21 +#define ENS21X_REG_SENS_START 0x22 +#define ENS21X_REG_SENS_STOP 0x23 +#define ENS21X_REG_SENS_STAT 0x24 +#define ENS21X_REG_T_VAL 0x30 +#define ENS21X_REG_H_VAL 0x33 + +/* value definitions */ +#define ENS21X_SENS_START_T_START BIT(0) +#define ENS21X_SENS_START_H_START BIT(1) + +#define ENS21X_SENS_STAT_T_ACTIVE BIT(0) +#define ENS21X_SENS_STAT_H_ACTIVE BIT(1) + +#define ENS21X_SYS_CTRL_LOW_POWER_ENABLE BIT(0) +#define ENS21X_SYS_CTRL_SYS_RESET BIT(7) + +#define ENS21X_SYS_STAT_SYS_ACTIVE BIT(0) + +/* magic constants */ +#define ENS21X_CONST_TEMP_SCALE_INT 15 /* integer part of temperature scale (1/64) */ +#define ENS21X_CONST_TEMP_SCALE_DEC 625000 /* decimal part of temperature scale */ +#define ENS21X_CONST_HUM_SCALE_INT 1 /* integer part of humidity scale (1/512) */ +#define ENS21X_CONST_HUM_SCALE_DEC 953125 /* decimal part of humidity scale */ +#define ENS21X_CONST_TEMP_OFFSET_INT -17481 /* temperature offset (64 * -273.15) */ +#define ENS21X_CONST_TEMP_OFFSET_DEC 600000 /* decimal part of offset */ +#define ENS210_CONST_CONVERSION_TIME 130 +#define ENS212_CONST_CONVERSION_TIME 32 +#define ENS215_CONST_CONVERSION_TIME 132 + +static const struct of_device_id ens21x_of_match[]; + +struct ens21x_dev { + struct i2c_client *client; + struct mutex lock; + int part_id; +}; + +enum ens21x_partnumber { + ENS210 = 0x0210, + ENS210A = 0xa210, + ENS211 = 0x0211, + ENS212 = 0x0212, + ENS213A = 0xa213, + ENS215 = 0x0215, +}; + +/* calculate 17-bit crc7 */ +static u8 ens21x_crc7(u32 val) +{ + u32 val_be = (htonl(val & 0x1ffff) >> 0x8); + + return crc7_be(0xde, (u8 *)&val_be, 3) >> 1; +} + +static int ens21x_get_measurement(struct iio_dev *indio_dev, bool temp, int *val) +{ + u32 regval, regval_le; + int ret, tries; + struct ens21x_dev *dev_data = iio_priv(indio_dev); + + /* assert read */ + i2c_smbus_write_byte_data(dev_data->client, ENS21X_REG_SENS_START, + temp ? ENS21X_SENS_START_T_START : + ENS21X_SENS_START_H_START); + + /* wait for conversion to be ready */ + switch (dev_data->part_id) { + case ENS210: + case ENS210A: + msleep(ENS210_CONST_CONVERSION_TIME); + break; + case ENS211: + case ENS212: + msleep(ENS212_CONST_CONVERSION_TIME); + break; + case ENS213A: + case ENS215: + msleep(ENS215_CONST_CONVERSION_TIME); + break; + default: + dev_err(&dev_data->client->dev, "unrecognised device"); + return -ENODEV; + } + + tries = 10; + while (tries-- > 0) { + usleep_range(4000, 5000); + ret = i2c_smbus_read_byte_data(dev_data->client, + ENS21X_REG_SENS_STAT); + if (ret < 0) + continue; + if (!(ret & (temp ? ENS21X_SENS_STAT_T_ACTIVE : + ENS21X_SENS_STAT_H_ACTIVE))) + break; + } + if (tries < 0) { + dev_err(&indio_dev->dev, "timeout waiting for sensor reading\n"); + return -EIO; + } + + /* perform read */ + ret = i2c_smbus_read_i2c_block_data( + dev_data->client, temp ? ENS21X_REG_T_VAL : ENS21X_REG_H_VAL, 3, + (u8 *)®val_le); + if (ret < 0) { + dev_err(&dev_data->client->dev, "failed to read register"); + return -EIO; + } else if (ret == 3) { + regval = le32_to_cpu(regval_le); + if (ens21x_crc7(regval) == ((regval >> 17) & 0x7f)) { + *val = regval & 0xffff; + return IIO_VAL_INT; + } + /* crc fail */ + dev_err(&indio_dev->dev, "ens invalid crc\n"); + return -EIO; + } + + dev_err(&indio_dev->dev, "expected 3 bytes, received %d\n", ret); + return -EIO; +} + +static int ens21x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct ens21x_dev *dev_data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&dev_data->lock); + ret = ens21x_get_measurement( + indio_dev, channel->type == IIO_TEMP, val); + mutex_unlock(&dev_data->lock); + break; + case IIO_CHAN_INFO_SCALE: + if (channel->type == IIO_TEMP) { + *val = ENS21X_CONST_TEMP_SCALE_INT; + *val2 = ENS21X_CONST_TEMP_SCALE_DEC; + } else { + *val = ENS21X_CONST_HUM_SCALE_INT; + *val2 = ENS21X_CONST_HUM_SCALE_DEC; + } + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_OFFSET: + if (channel->type == IIO_TEMP) { + *val = ENS21X_CONST_TEMP_OFFSET_INT; + *val2 = ENS21X_CONST_TEMP_OFFSET_DEC; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + } + *val = 0; + ret = IIO_VAL_INT; + break; + default: + break; + } + return ret; +} + +static const struct iio_chan_spec ens21x_channels[] = { + /* Temperature channel */ + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + }, + /* Humidity channel */ + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + } +}; + +static const struct iio_info ens21x_info = { + .read_raw = ens21x_read_raw, +}; + +static const struct i2c_device_id ens21x_id[] = { + {"ens210", ENS210}, + {"ens210a", ENS210A}, + {"ens211", ENS211}, + {"ens212", ENS212}, + {"ens213a", ENS213A}, + {"ens215", ENS215}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ens21x_id); + +static int ens21x_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct of_device_id *match; + struct ens21x_dev *dev_data; + struct iio_dev *indio_dev; + uint16_t part_id_le, part_id; + int ret, tries; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "adapter does not support some i2c transactions\n"); + return -EOPNOTSUPP; + } + + match = of_match_device(ens21x_of_match, &client->dev); + if (!match) { + dev_err(&client->dev, "failed to get match data\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); + if (!indio_dev) + return -ENOMEM; + + dev_data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + dev_data->client = client; + mutex_init(&dev_data->lock); + + /* reset device */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, + ENS21X_SYS_CTRL_SYS_RESET); + if (ret) + return ret; + + /* wait for device to become active */ + usleep_range(4000, 5000); + + /* disable low power mode */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, 0x00); + if (ret) + return ret; + + /* wait for device to become active */ + tries = 10; + while (tries-- > 0) { + msleep(20); + ret = i2c_smbus_read_byte_data(client, ENS21X_REG_SYS_STAT); + if (ret < 0) + return ret; + if (ret & ENS21X_SYS_STAT_SYS_ACTIVE) + break; + } + if (tries < 0) { + dev_err(&client->dev, + "timeout waiting for ens21x to become active\n"); + return -EIO; + } + + /* get part_id */ + part_id_le = i2c_smbus_read_word_data(client, ENS21X_REG_PART_ID); + if (part_id_le < 0) + return part_id_le; + part_id = le16_to_cpu(part_id_le); + + if (part_id != id->driver_data) { + dev_err(&client->dev, + "Part ID does not match (0x%04x != 0x%04lx)\n", part_id, + id->driver_data); + return -ENODEV; + } + + /* reenable low power */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, + ENS21X_SYS_CTRL_LOW_POWER_ENABLE); + if (ret) + return ret; + + dev_data->part_id = part_id; + + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ens21x_channels; + indio_dev->num_channels = ARRAY_SIZE(ens21x_channels); + indio_dev->info = &ens21x_info; + + return devm_iio_device_register(&client->dev, indio_dev); +} + + +static const struct of_device_id ens21x_of_match[] = { + { .compatible = "sciosense,ens210" }, + { .compatible = "sciosense,ens210a" }, + { .compatible = "sciosense,ens211" }, + { .compatible = "sciosense,ens212" }, + { .compatible = "sciosense,ens213a" }, + { .compatible = "sciosense,ens215" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ens21x_of_match); + +static struct i2c_driver ens21x_driver = { + .probe = ens21x_probe, + .id_table = ens21x_id, + .driver = { + .name = "ens21x", + .of_match_table = ens21x_of_match, + }, +}; + +module_i2c_driver(ens21x_driver); + +MODULE_DESCRIPTION("ScioSense ENS21x temperature and humidity sensor driver"); +MODULE_AUTHOR("Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>"); +MODULE_LICENSE("GPL v2"); + -- 2.39.2
