From: Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx> Add support for: AD4111, AD4112, AD4114, AD4115, AD4116. AD411x family ADCs support a VCOM pin. The purpose of this pin is to offer a dedicated common-mode voltage input for single-ended channels. This pin is specified as supporting a differential channel with VIN10 on model AD4116. AD4111/AD4112 support current channels. Support is implemented using single-channel and "adi,current-channel". Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx> --- .../devicetree/bindings/iio/adc/adi,ad7173.yaml | 194 ++++++++++++++++++++- 1 file changed, 192 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml index ea6cfcd0aff4..17c5d39cc2c1 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -19,7 +19,18 @@ description: | primarily for measurement of signals close to DC but also delivers outstanding performance with input bandwidths out to ~10kHz. + Analog Devices AD411x ADC's: + The AD411X family encompasses a series of low power, low noise, 24-bit, + sigma-delta analog-to-digital converters that offer a versatile range of + specifications. They integrate an analog front end suitable for processing + fully differential/single-ended and bipolar voltage inputs. + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf @@ -31,6 +42,11 @@ description: | properties: compatible: enum: + - adi,ad4111 + - adi,ad4112 + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 - adi,ad7172-2 - adi,ad7172-4 - adi,ad7173-8 @@ -129,10 +145,56 @@ patternProperties: maximum: 15 diff-channels: + description: | + This property is used for defining the inputs of a differential + voltage channel. The first value is the positive input and the second + value is the negative input of the channel. + + Family AD411x supports a dedicated VINCOM voltage input. + To select it set the second channel to 16. + (VIN2, VINCOM) -> diff-channels = <2 16> + + There are special values that can be selected besides the voltage + analog inputs: + 21: REF+ + 22: REF− + + Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2, + must be paired together and can be used to monitor the power supply + of the ADC: + 19: ((AVDD1 − AVSS)/5)+ + 20: ((AVDD1 − AVSS)/5)− + items: minimum: 0 maximum: 31 + single-channel: + description: | + This property is used for defining a current channel or the positive + input of a voltage channel (single-ended or pseudo-differential). + + Models AD4111 and AD4112 support current channels. + Example: (IIN2+, IIN2−) -> single-channel = <2> + To correctly configure a current channel set the "adi,current-channel" + property to true. + + To configure a single-ended/pseudo-differential channel set the + "common-mode-channel" property to the desired negative voltage input. + + When used as a voltage channel, special inputs are valid as well. + minimum: 0 + maximum: 31 + + common-mode-channel: + description: + This property is used for defining the negative input of a + single-ended or pseudo-differential voltage channel. + + Special inputs are valid as well. + minimum: 0 + maximum: 31 + adi,reference-select: description: | Select the reference source to use when converting on @@ -154,9 +216,31 @@ patternProperties: - avdd default: refout-avss + adi,current-channel: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Signal that the selected inputs are current channels. + Only available on AD4111 and AD4112. + required: - reg - - diff-channels + + allOf: + - oneOf: + - required: [single-channel] + properties: + diff-channels: false + - required: [diff-channels] + properties: + single-channel: false + adi,current-channel: false + common-mode-channel: false + + - if: + required: [common-mode-channel] + then: + properties: + adi,current-channel: false required: - compatible @@ -166,7 +250,6 @@ allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# # Only ad7172-4, ad7173-8 and ad7175-8 support vref2 - # Other models have [0-3] channel registers - if: properties: compatible: @@ -187,6 +270,37 @@ allOf: - vref - refout-avss - avdd + + - if: + properties: + compatible: + contains: + enum: + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 + - adi,ad7173-8 + - adi,ad7175-8 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + reg: + maximum: 15 + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7172-2 + - adi,ad7175-2 + - adi,ad7176-2 + - adi,ad7177-2 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: reg: maximum: 3 @@ -210,6 +324,34 @@ allOf: required: - adi,reference-select + - if: + properties: + compatible: + contains: + enum: + - adi,ad4111 + - adi,ad4112 + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 + then: + properties: + avdd2-supply: false + + - if: + properties: + compatible: + not: + contains: + enum: + - adi,ad4111 + - adi,ad4112 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,current-channel: false + - if: anyOf: - required: [clock-names] @@ -221,6 +363,7 @@ allOf: unevaluatedProperties: false examples: + # Example AD7173-8 with external reference connected to REF+/REF-: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -277,3 +420,50 @@ examples: }; }; }; + + # Example AD4111 with current channel and single-ended channel: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4111"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <4 5>; + }; + + // Single ended channel VIN2/VINCOM + channel@1 { + reg = <1>; + bipolar; + single-channel = <2>; + common-mode-channel = <16>; + }; + + // Current channel IN2+/IN2- + channel@2 { + reg = <2>; + single-channel = <2>; + adi,current-channel; + }; + }; + }; -- 2.43.0
