Use dev_err_probe() (and variants) in the probe() path. While at it, made
some simple improvements:
* Explicitly included the err.h and errno.h headers;
* Removed some unnecessary line breaks;
* Removed a redundant 'else';
* Added some missing \n to prink.
Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
---
drivers/iio/temperature/ltc2983.c | 260 +++++++++++++++++---------------------
1 file changed, 113 insertions(+), 147 deletions(-)
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index 24d19f3c7292..21f2cfc55bf8 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -8,6 +8,8 @@
#include <linux/bitfield.h>
#include <linux/completion.h>
#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
@@ -432,10 +434,9 @@ __ltc2983_custom_sensor_new(struct ltc2983_data *st, const struct fwnode_handle
else
n_entries = fwnode_property_count_u64(fn, propname);
/* n_entries must be an even number */
- if (!n_entries || (n_entries % 2) != 0) {
- dev_err(dev, "Number of entries either 0 or not even\n");
- return ERR_PTR(-EINVAL);
- }
+ if (!n_entries || (n_entries % 2) != 0)
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Number of entries either 0 or not even\n");
new_custom = devm_kzalloc(dev, sizeof(*new_custom), GFP_KERNEL);
if (!new_custom)
@@ -443,19 +444,17 @@ __ltc2983_custom_sensor_new(struct ltc2983_data *st, const struct fwnode_handle
new_custom->size = n_entries * n_size;
/* check Steinhart size */
- if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE) {
- dev_err(dev, "Steinhart sensors size(%zu) must be %u\n", new_custom->size,
- LTC2983_CUSTOM_STEINHART_SIZE);
- return ERR_PTR(-EINVAL);
- }
+ if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE)
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Steinhart sensors size(%zu) must be %u\n",
+ new_custom->size, LTC2983_CUSTOM_STEINHART_SIZE);
+
/* Check space on the table. */
if (st->custom_table_size + new_custom->size >
- (LTC2983_CUST_SENS_TBL_END_REG -
- LTC2983_CUST_SENS_TBL_START_REG) + 1) {
- dev_err(dev, "No space left(%d) for new custom sensor(%zu)",
- st->custom_table_size, new_custom->size);
- return ERR_PTR(-EINVAL);
- }
+ (LTC2983_CUST_SENS_TBL_END_REG - LTC2983_CUST_SENS_TBL_START_REG) + 1)
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "No space left(%d) for new custom sensor(%zu)\n",
+ st->custom_table_size, new_custom->size);
/* allocate the table */
if (is_steinhart)
@@ -688,21 +687,19 @@ ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
LTC2983_THERMOCOUPLE_OC_CURR(3);
break;
default:
- dev_err(&st->spi->dev,
- "Invalid open circuit current:%u", oc_current);
- return ERR_PTR(-EINVAL);
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid open circuit current:%u\n",
+ oc_current);
}
thermo->sensor_config |= LTC2983_THERMOCOUPLE_OC_CHECK(1);
}
/* validate channel index */
if (!(thermo->sensor_config & LTC2983_THERMOCOUPLE_DIFF_MASK) &&
- sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev,
- "Invalid chann:%d for differential thermocouple",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chann:%d for differential thermocouple\n",
+ sensor->chan);
struct fwnode_handle *ref __free(fwnode_handle) =
fwnode_find_reference(child, "adi,cold-junction-handle", 0);
@@ -710,14 +707,13 @@ ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data
ref = NULL;
} else {
ret = fwnode_property_read_u32(ref, "reg", &thermo->cold_junction_chan);
- if (ret) {
+ if (ret)
/*
* This would be catched later but we can just return
* the error right away.
*/
- dev_err(&st->spi->dev, "Property reg must be given\n");
- return ERR_PTR(ret);
- }
+ return dev_err_ptr_probe(&st->spi->dev, ret,
+ "Property reg must be given\n");
}
/* check custom sensor */
@@ -753,16 +749,14 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
struct fwnode_handle *ref __free(fwnode_handle) =
fwnode_find_reference(child, "adi,rsense-handle", 0);
- if (IS_ERR(ref)) {
- dev_err(dev, "Property adi,rsense-handle missing or invalid");
- return ERR_CAST(ref);
- }
+ if (IS_ERR(ref))
+ return dev_err_cast_probe(dev, ref,
+ "Property adi,rsense-handle missing or invalid\n");
ret = fwnode_property_read_u32(ref, "reg", &rtd->r_sense_chan);
- if (ret) {
- dev_err(dev, "Property reg must be given\n");
- return ERR_PTR(ret);
- }
+ if (ret)
+ return dev_err_ptr_probe(dev, ret,
+ "Property reg must be given\n");
ret = fwnode_property_read_u32(child, "adi,number-of-wires", &n_wires);
if (!ret) {
@@ -781,19 +775,19 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
rtd->sensor_config = LTC2983_RTD_N_WIRES(3);
break;
default:
- dev_err(dev, "Invalid number of wires:%u\n", n_wires);
- return ERR_PTR(-EINVAL);
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Invalid number of wires:%u\n",
+ n_wires);
}
}
if (fwnode_property_read_bool(child, "adi,rsense-share")) {
/* Current rotation is only available with rsense sharing */
if (fwnode_property_read_bool(child, "adi,current-rotate")) {
- if (n_wires == 2 || n_wires == 3) {
- dev_err(dev,
- "Rotation not allowed for 2/3 Wire RTDs");
- return ERR_PTR(-EINVAL);
- }
+ if (n_wires == 2 || n_wires == 3)
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Rotation not allowed for 2/3 Wire RTDs\n");
+
rtd->sensor_config |= LTC2983_RTD_C_ROTATE(1);
} else {
rtd->sensor_config |= LTC2983_RTD_R_SHARE(1);
@@ -816,29 +810,22 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
if (((rtd->sensor_config & LTC2983_RTD_KELVIN_R_SENSE_MASK)
== LTC2983_RTD_KELVIN_R_SENSE_MASK) &&
- (rtd->r_sense_chan <= min)) {
+ (rtd->r_sense_chan <= min))
/* kelvin rsense*/
- dev_err(dev,
- "Invalid rsense chann:%d to use in kelvin rsense",
- rtd->r_sense_chan);
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Invalid rsense chann:%d to use in kelvin rsense\n",
+ rtd->r_sense_chan);
- return ERR_PTR(-EINVAL);
- }
-
- if (sensor->chan < min || sensor->chan > max) {
- dev_err(dev, "Invalid chann:%d for the rtd config",
- sensor->chan);
-
- return ERR_PTR(-EINVAL);
- }
+ if (sensor->chan < min || sensor->chan > max)
+ return dev_err_ptr_probe(dev, -EINVAL,
+ "Invalid chann:%d for the rtd config\n",
+ sensor->chan);
} else {
/* same as differential case */
- if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev,
- "Invalid chann:%d for RTD", sensor->chan);
-
- return ERR_PTR(-EINVAL);
- }
+ if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chann:%d for RTD\n",
+ sensor->chan);
}
/* check custom sensor */
@@ -886,10 +873,9 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
rtd->excitation_current = 0x08;
break;
default:
- dev_err(&st->spi->dev,
- "Invalid value for excitation current(%u)",
- excitation_current);
- return ERR_PTR(-EINVAL);
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid value for excitation current(%u)\n",
+ excitation_current);
}
}
@@ -913,16 +899,14 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
struct fwnode_handle *ref __free(fwnode_handle) =
fwnode_find_reference(child, "adi,rsense-handle", 0);
- if (IS_ERR(ref)) {
- dev_err(dev, "Property adi,rsense-handle missing or invalid");
- return ERR_CAST(ref);
- }
+ if (IS_ERR(ref))
+ return dev_err_cast_probe(dev, ref,
+ "Property adi,rsense-handle missing or invalid\n");
ret = fwnode_property_read_u32(ref, "reg", &thermistor->r_sense_chan);
- if (ret) {
- dev_err(dev, "rsense channel must be configured...\n");
- return ERR_PTR(ret);
- }
+ if (ret)
+ return dev_err_ptr_probe(dev, ret,
+ "rsense channel must be configured...\n");
if (fwnode_property_read_bool(child, "adi,single-ended")) {
thermistor->sensor_config = LTC2983_THERMISTOR_SGL(1);
@@ -937,12 +921,10 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
}
/* validate channel index */
if (!(thermistor->sensor_config & LTC2983_THERMISTOR_DIFF_MASK) &&
- sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev,
- "Invalid chann:%d for differential thermistor",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chann:%d for differential thermistor\n",
+ sensor->chan);
/* check custom sensor */
if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART) {
@@ -981,12 +963,10 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
switch (excitation_current) {
case 0:
/* auto range */
- if (sensor->type >=
- LTC2983_SENSOR_THERMISTOR_STEINHART) {
- dev_err(&st->spi->dev,
- "Auto Range not allowed for custom sensors\n");
- return ERR_PTR(-EINVAL);
- }
+ if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Auto Range not allowed for custom sensors\n");
+
thermistor->excitation_current = 0x0c;
break;
case 250:
@@ -1023,10 +1003,9 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s
thermistor->excitation_current = 0x0b;
break;
default:
- dev_err(&st->spi->dev,
- "Invalid value for excitation current(%u)",
- excitation_current);
- return ERR_PTR(-EINVAL);
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid value for excitation current(%u)\n",
+ excitation_current);
}
}
@@ -1056,12 +1035,11 @@ ltc2983_diode_new(const struct fwnode_handle *child, const struct ltc2983_data *
/* validate channel index */
if (!(diode->sensor_config & LTC2983_DIODE_DIFF_MASK) &&
- sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev,
- "Invalid chann:%d for differential thermistor",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chann:%d for differential thermistor\n",
+ sensor->chan);
+
/* set common parameters */
diode->sensor.fault_handler = ltc2983_common_fault_handler;
diode->sensor.assign_chan = ltc2983_diode_assign_chan;
@@ -1083,10 +1061,9 @@ ltc2983_diode_new(const struct fwnode_handle *child, const struct ltc2983_data *
diode->excitation_current = 0x03;
break;
default:
- dev_err(&st->spi->dev,
- "Invalid value for excitation current(%u)",
- excitation_current);
- return ERR_PTR(-EINVAL);
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid value for excitation current(%u)\n",
+ excitation_current);
}
}
@@ -1111,17 +1088,15 @@ static struct ltc2983_sensor *ltc2983_r_sense_new(struct fwnode_handle *child,
return ERR_PTR(-ENOMEM);
/* validate channel index */
- if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev, "Invalid chann:%d for r_sense",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chann:%d for r_sense\n",
+ sensor->chan);
ret = fwnode_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
- if (ret) {
- dev_err(&st->spi->dev, "Property adi,rsense-val-milli-ohms missing\n");
- return ERR_PTR(-EINVAL);
- }
+ if (ret)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Property adi,rsense-val-milli-ohms missing\n");
/*
* Times 1000 because we have milli-ohms and __convert_to_raw
* expects scales of 1000000 which are used for all other
@@ -1149,12 +1124,11 @@ static struct ltc2983_sensor *ltc2983_adc_new(struct fwnode_handle *child,
if (fwnode_property_read_bool(child, "adi,single-ended"))
adc->single_ended = true;
- if (!adc->single_ended &&
- sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev, "Invalid chan:%d for differential adc\n",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ if (!adc->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chan:%d for differential adc\n",
+ sensor->chan);
+
/* set common parameters */
adc->sensor.assign_chan = ltc2983_adc_assign_chan;
adc->sensor.fault_handler = ltc2983_common_fault_handler;
@@ -1175,12 +1149,10 @@ static struct ltc2983_sensor *ltc2983_temp_new(struct fwnode_handle *child,
if (fwnode_property_read_bool(child, "adi,single-ended"))
temp->single_ended = true;
- if (!temp->single_ended &&
- sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
- dev_err(&st->spi->dev, "Invalid chan:%d for differential temp\n",
- sensor->chan);
- return ERR_PTR(-EINVAL);
- }
+ if (!temp->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN)
+ return dev_err_ptr_probe(&st->spi->dev, -EINVAL,
+ "Invalid chan:%d for differential temp\n",
+ sensor->chan);
temp->custom = __ltc2983_custom_sensor_new(st, child, "adi,custom-temp",
false, 4096, true);
@@ -1296,8 +1268,8 @@ static int ltc2983_reg_access(struct iio_dev *indio_dev,
if (readval)
return regmap_read(st->regmap, reg, readval);
- else
- return regmap_write(st->regmap, reg, writeval);
+
+ return regmap_write(st->regmap, reg, writeval);
}
static irqreturn_t ltc2983_irq_handler(int irq, void *data)
@@ -1330,10 +1302,9 @@ static int ltc2983_parse_fw(struct ltc2983_data *st)
device_property_read_u32(dev, "adi,filter-notch-freq", &st->filter_notch_freq);
st->num_channels = device_get_child_node_count(dev);
- if (!st->num_channels) {
- dev_err(&st->spi->dev, "At least one channel must be given!");
- return -EINVAL;
- }
+ if (!st->num_channels)
+ return dev_err_probe(&st->spi->dev, -EINVAL,
+ "At least one channel must be given!\n");
st->sensors = devm_kcalloc(dev, st->num_channels, sizeof(*st->sensors),
GFP_KERNEL);
@@ -1438,19 +1409,17 @@ static int ltc2983_eeprom_cmd(struct ltc2983_data *st, unsigned int cmd,
time = wait_for_completion_timeout(&st->completion,
msecs_to_jiffies(wait_time));
- if (!time) {
- dev_err(&st->spi->dev, "EEPROM command timed out\n");
- return -ETIMEDOUT;
- }
+ if (!time)
+ return dev_err_probe(&st->spi->dev, -ETIMEDOUT,
+ "EEPROM command timed out\n");
ret = regmap_read(st->regmap, status_reg, &val);
if (ret)
return ret;
- if (val & status_fail_mask) {
- dev_err(&st->spi->dev, "EEPROM command failed: 0x%02X\n", val);
- return -EINVAL;
- }
+ if (val & status_fail_mask)
+ return dev_err_probe(&st->spi->dev, -EINVAL,
+ "EEPROM command failed: 0x%02X\n", val);
return 0;
}
@@ -1464,10 +1433,9 @@ static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
ret = regmap_read_poll_timeout(st->regmap, LTC2983_STATUS_REG, status,
LTC2983_STATUS_UP(status) == 1, 25000,
25000 * 10);
- if (ret) {
- dev_err(&st->spi->dev, "Device startup timed out\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&st->spi->dev, ret,
+ "Device startup timed out\n");
ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
LTC2983_NOTCH_FREQ_MASK,
@@ -1583,10 +1551,9 @@ static int ltc2983_probe(struct spi_device *spi)
return -ENODEV;
st->regmap = devm_regmap_init_spi(spi, <c2983_regmap_config);
- if (IS_ERR(st->regmap)) {
- dev_err(&spi->dev, "Failed to initialize regmap\n");
- return PTR_ERR(st->regmap);
- }
+ if (IS_ERR(st->regmap))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->regmap),
+ "Failed to initialize regmap\n");
mutex_init(&st->lock);
init_completion(&st->completion);
@@ -1624,10 +1591,9 @@ static int ltc2983_probe(struct spi_device *spi)
ret = devm_request_irq(&spi->dev, spi->irq, ltc2983_irq_handler,
IRQF_TRIGGER_RISING, st->info->name, st);
- if (ret) {
- dev_err(&spi->dev, "failed to request an irq, %d", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&spi->dev, ret,
+ "failed to request an irq\n");
if (st->info->has_eeprom) {
ret = ltc2983_eeprom_cmd(st, LTC2983_EEPROM_WRITE_CMD,
--
2.45.2
