On 04/06/2024 12:44, Mudit Sharma wrote: > On 03/06/2024 23:37, Javier Carrasco wrote: >> On 03/06/2024 18:21, Mudit Sharma wrote: >>> Add myself as maintainer for ROHM BH1745 colour sensor driver. >>> >>> Signed-off-by: Mudit Sharma <muditsharma.info@xxxxxxxxx> >>> --- >>> v1->v2: >>> - No changes >>> >>> MAINTAINERS | 7 +++++++ >>> 1 file changed, 7 insertions(+) >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS >>> index d6c90161c7bf..945873321fef 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -19407,6 +19407,13 @@ S: Supported >>> F: drivers/power/supply/bd99954-charger.c >>> F: drivers/power/supply/bd99954-charger.h >>> +ROHM BH1745 COLOUR SENSOR >>> +M: Mudit Sharma <muditsharma.info@xxxxxxxxx> >>> +L: linux-iio@xxxxxxxxxxxxxxx >>> +S: Maintained >>> +F: Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml >>> +F: drivers/iio/light/bh1745.c >>> + >>> ROHM BH1750 AMBIENT LIGHT SENSOR DRIVER >>> M: Tomasz Duszynski <tduszyns@xxxxxxxxx> >>> S: Maintained >> >> Hi Mudit, >> >> is there any special reason to have a separate patch for this? The >> addition to MAINTANERS for new drives is usually included in the patch >> that provides the driver itself. >> >> Best regards, >> Javier Carrasco > > Hi Javier, > > Adding this in a separate commit was just a pattern I notices with some > other drivers, for instance 3b4e0e9. > > If necessary and/or considered good practice, I can squash this in the > patch that brings in the driver. > > Best regards, > Mudit Sharma Although there might be some cases where it was added separately, it is much more common that it is added to the patch that provides the driver. Some perfectionists even include the entry in the dt-bindings patch, and then add the link to the driver code in the driver patch. I believe that a simple squash would be ok, though. Best regards, Javier Carrasco
